Re: [PATCH v2] firmware: arm_sdei: Fix sleep from invalid context BUG

[James Morse <james.morse@arm.com>]

Hi Pierre,

Sorry its taken so long for me to catch up with this ...

On 18/10/2022 14:04, Pierre Gondois wrote:
> On an Ampere Altra,
> Running a preemp_rt kernel based on v5.19-rc3-rt5 on an
> Ampere Altra triggers:
> [   15.683141] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
> [   15.683154] in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 24, name: cpuhp/0
> [   15.683157] preempt_count: 0, expected: 0
> [   15.683159] RCU nest depth: 0, expected: 0
> [   15.683163] 3 locks held by cpuhp/0/24:
> [   15.683167]  #0: ffffda30217c70d0 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248
> [   15.683201]  #1: ffffda30217c7120 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248
> [   15.683205]  #2: ffffda3021c711f0 (sdei_list_lock){....}-{3:3}, at: sdei_cpuhp_up+0x3c/0x130
> [   15.683224] irq event stamp: 36
> [   15.683226] hardirqs last  enabled at (35): [<ffffda301e85b7bc>] finish_task_switch+0xb4/0x2b0
> [   15.683236] hardirqs last disabled at (36): [<ffffda301e812fec>] cpuhp_thread_fun+0x21c/0x248
> [   15.683238] softirqs last  enabled at (0): [<ffffda301e80b184>] copy_process+0x63c/0x1ac0
> [   15.683245] softirqs last disabled at (0): [<0000000000000000>] 0x0
> [   15.683258] CPU: 0 PID: 24 Comm: cpuhp/0 Not tainted 5.19.0-rc3-rt5-[...]
> [   15.683265] Hardware name: WIWYNN Mt.Jade Server System B81.03001.0005/Mt.Jade Motherboard, BIOS 1.08.20220218 (SCP: 1.08.20220218) 2022/02/18
> [   15.683268] Call trace:
> [   15.683271]  dump_backtrace+0x114/0x120
> [   15.683277]  show_stack+0x20/0x70
> [   15.683279]  dump_stack_lvl+0x9c/0xd8
> [   15.683288]  dump_stack+0x18/0x34
> [   15.683289]  __might_resched+0x188/0x228
> [   15.683292]  rt_spin_lock+0x70/0x120
> [   15.683301]  sdei_cpuhp_up+0x3c/0x130
> [   15.683303]  cpuhp_invoke_callback+0x250/0xf08
> [   15.683305]  cpuhp_thread_fun+0x120/0x248
> [   15.683308]  smpboot_thread_fn+0x280/0x320
> [   15.683315]  kthread+0x130/0x140
> [   15.683321]  ret_from_fork+0x10/0x20

> sdei_cpuhp_up() is called in the STARTING hotplug section,
> which runs whith interrupts disabled. Move CPUHP_AP_ARM_SDEI_
> state to the _ONLINE section to execute the cpuhp cb with
> preemption enabled.

The background to this is SDEI got its own cpuhp slot because 'perf NMI' support
was one of the use-cases, but this got superseded by pNMI. Without an interaction with
perf, the slot doesn't need to be that early.


> Some SDEI calls (e.g. SDEI_1_0_FN_SDEI_PE_MASK) take actions on the
> calling CPU. It is checked that preemption is disabled for them.
> _ONLINE cpuhp cb are executed in the 'per CPU hotplug thread'.
> Preemption is enabled in those threads, but their cpumask is limited
> to 1 CPU.

> Move 'WARN_ON_ONCE(preemptible())' statements so that SDEI cpuhp cb
> don't trigger them. This means that no check will be done for some
> cases, e.g. sdei_mask_local_cpu() invocations.

(these things are documentation anyway)


> Also add a check for the SDEI_1_0_FN_SDEI_PRIVATE_RESET SDEI call
> which acts on the calling CPU.

> diff --git a/drivers/firmware/arm_sdei.c b/drivers/firmware/arm_sdei.c
> index 1e1a51510e83..9b03e164a37a 100644
> --- a/drivers/firmware/arm_sdei.c
> +++ b/drivers/firmware/arm_sdei.c

> @@ -401,6 +399,8 @@ int sdei_event_enable(u32 event_num)
>  	int err = -EINVAL;
>  	struct sdei_event *event;
>  
> +	WARN_ON_ONCE(preemptible());
> +
>  	mutex_lock(&sdei_events_lock);
>  	event = sdei_event_find(event_num);
>  	if (!event) {

This doesn't look right. How can this code take a mutex if its in a non-preemptable context?

> @@ -492,6 +490,7 @@ int sdei_event_unregister(u32 event_num)
>  	struct sdei_event *event;
>  
>  	WARN_ON(in_nmi());
> +	WARN_ON_ONCE(preemptible());
>  
>  	mutex_lock(&sdei_events_lock);
>  	event = sdei_event_find(event_num);

Same again.

> @@ -576,6 +573,7 @@ int sdei_event_register(u32 event_num, sdei_event_callback *cb, void *arg)
>  	struct sdei_event *event;
>  
>  	WARN_ON(in_nmi());
> +	WARN_ON_ONCE(preemptible());
>  
>  	mutex_lock(&sdei_events_lock);
>  	if (sdei_event_find(event_num)) {

Same again.

I think you've copied these here because they called _local_event_unregister(), but they
did that via on_each_cpu(), which is what made _local_event_unregister() non-preemtable.

You can just remove these three, the original warnings were mostly documentation, and to
catch myself out. (before RT moved the goal posts).

With that:
Reviewed-by: James Morse <james.morse@arm.com>

(could you trim the [timestamps] out of the commit log?)


> @@ -765,7 +765,7 @@ static int sdei_device_freeze(struct device *dev)
>  	int err;
>  
>  	/* unregister private events */
> -	cpuhp_remove_state(CPUHP_AP_ARM_SDEI_STARTING);
> +	cpuhp_remove_state(CPUHP_AP_ARM_SDEI_ONLINE);

Is there any mileage in making this CPUHP_AP_ONLINE_DYN ?
Perf really was the only reason that this needed to happen in any particular order.


Thanks,

James

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel