[PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support

[PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support

[Sergei Shtylyov]

Hello!

Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
connected to the LVDS output. These patches depend on the Thine THC63LVD1024
driver and the R8A77980 LVDS support patch in order to work, and R8A77980 GPIO
DT patches in order to apply/compile...

[1/5] arm64: dts: renesas: r8a77980: add FCPVD support
[2/5] arm64: dts: renesas: r8a77980: add VSPD support
[3/5] arm64: dts: renesas: r8a77980: add DU support
[4/5] arm64: dts: renesas: r8a77980: add LVDS support
[5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support

WBR, Sergei

[PATCH v2 1/5] arm64: dts: renesas: r8a77980: add FCPVD support

[Sergei Shtylyov]

Describe FCPVD0 in the R8A77980 device tree; it will be used by VSPD0 in
the next patch...

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm64/boot/dts/renesas/r8a77980.dtsi |    8 ++++++++
 1 file changed, 8 insertions(+)

Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -653,6 +653,14 @@
 			resets = <&cpg 408>;
 		};
 
+		fcpvd0: fcp at fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
 		prr: chipid at fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;

[PATCH v2 2/5] arm64: dts: renesas: r8a77980: add VSPD support

[Sergei Shtylyov]

Describe VSPD0 in the R8A77980 device tree; it will be used by DU in
the next patch...

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm64/boot/dts/renesas/r8a77980.dtsi |   10 ++++++++++
 1 file changed, 10 insertions(+)

Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -653,6 +653,16 @@
 			resets = <&cpg 408>;
 		};
 
+		vspd0: vsp at fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x4000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
 		fcpvd0: fcp at fea27000 {
 			compatible = "renesas,fcpv";
 			reg = <0 0xfea27000 0 0x200>;

[PATCH v2 3/5] arm64: dts: renesas: r8a77980: add DU support

[Sergei Shtylyov]

Define the generic R8A77980 part of the DU device node.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm64/boot/dts/renesas/r8a77980.dtsi |   30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -671,6 +671,36 @@
 			resets = <&cpg 603>;
 		};
 
+		du: display at feb00000 {
+			compatible = "renesas,du-r8a77980",
+				     "renesas,du-r8a77970";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 724>;
+			vsps = <&vspd0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+
+				port at 1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+					};
+				};
+			};
+		};
+
 		prr: chipid at fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;

[PATCH v2 4/5] arm64: dts: renesas: r8a77980: add LVDS support

[Sergei Shtylyov]

Define the generic R8A77980 part of the LVDS device node.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm64/boot/dts/renesas/r8a77980.dtsi |   29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -696,6 +696,35 @@
 				port at 1 {
 					reg = <1>;
 					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder at feb90000 {
+			compatible = "renesas,r8a77980-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint =
+							<&du_out_lvds0>;
+					};
+				};
+
+				port at 1 {
+					reg = <1>;
+					lvds0_out: endpoint {
 					};
 				};
 			};

[PATCH v2 5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support

[Sergei Shtylyov]

Define the Condor/V3HSK board dependent parts of the DU and  LVDS device
nodes. Also add the device nodes for Thine THC63LVD1024 LVDS decoder and
Analog Devices ADV7511W HDMI transmitter...

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 2:
- added the V3HSK DT update, reworded the description, renamed the patch;
- added a space between the HDMI node name and a brace.

 arch/arm64/boot/dts/renesas/r8a77980-condor.dts |  106 +++++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts  |  120 ++++++++++++++++++++++++
 2 files changed, 226 insertions(+)

Index: renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -45,6 +45,56 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	d1_8v: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&d3_3v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port at 2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	x1_clk: x1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
 };
 
 &avb {
@@ -74,6 +124,13 @@
 	};
 };
 
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&x1_clk>;
+	clock-names = "du.0", "dclkin.0";
+	status = "okay";
+};
+
 &extal_clk {
 	clock-frequency = <16666666>;
 };
@@ -102,6 +159,55 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	hdmi at 39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		bgvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port at 1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port at 1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
 };
 
 &mmc0 {
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -27,6 +27,63 @@
 		/* first 128MB is reserved for secure area. */
 		reg = <0 0x48000000 0 0x78000000>;
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&vcc3v3_d5>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port at 2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	vcc1v8_d4: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8_D4";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc3v3_d5: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3_D5";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&du {
+	status = "okay";
 };
 
 &extal_clk {
@@ -53,6 +110,64 @@
 	};
 };
 
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port at 1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hdmi at 39 {
+		compatible = "adi,adv7511w";
+		#sound-dai-cells = <0>;
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		avdd-supply = <&vcc1v8_d4>;
+		dvdd-supply = <&vcc1v8_d4>;
+		pvdd-supply = <&vcc1v8_d4>;
+		bgvdd-supply = <&vcc1v8_d4>;
+		dvdd-3v-supply = <&vcc3v3_d5>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port at 1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
 &pfc {
 	gether_pins: gether {
 		groups = "gether_mdio_a", "gether_rgmii",
@@ -60,6 +175,11 @@
 		function = "gether";
 	};
 
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";

[PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support

[Simon Horman]

On Thu, Jun 07, 2018 at 11:17:03PM +0300, Sergei Shtylyov wrote:
> Hello!
> 
> Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
> 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
> DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
> connected to the LVDS output. These patches depend on the Thine THC63LVD1024
> driver and the R8A77980 LVDS support patch in order to work, and R8A77980 GPIO
> DT patches in order to apply/compile...
> 
> [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
> [2/5] arm64: dts: renesas: r8a77980: add VSPD support
> [3/5] arm64: dts: renesas: r8a77980: add DU support
> [4/5] arm64: dts: renesas: r8a77980: add LVDS support
> [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support

Sergei,

what are the changes in this series between v1 and v2?

[PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support

[Sergei Shtylyov]

On 6/8/2018 11:21 AM, Simon Horman wrote:

>> Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
>> 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
>> DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
>> connected to the LVDS output. These patches depend on the Thine THC63LVD1024
>> driver and the R8A77980 LVDS support patch in order to work, and R8A77980 GPIO
>> DT patches in order to apply/compile...
>>
>> [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
>> [2/5] arm64: dts: renesas: r8a77980: add VSPD support
>> [3/5] arm64: dts: renesas: r8a77980: add DU support
>> [4/5] arm64: dts: renesas: r8a77980: add LVDS support
>> [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
> 
> Sergei,
> 
> what are the changes in this series between v1 and v2?

    See patch #5. I've added the V3HSK DT update there...

MBR, Sergei

[PATCH v2 1/5] arm64: dts: renesas: r8a77980: add FCPVD support

[Simon Horman]

On Thu, Jun 07, 2018 at 11:19:31PM +0300, Sergei Shtylyov wrote:
> Describe FCPVD0 in the R8A77980 device tree; it will be used by VSPD0 in
> the next patch...
> 
> Based on the original (and large) patch by Vladimir Barinov.
> 
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Hi,

This looks fine to me but I will wait for the dependencies of this series
to land and to see if there are other reviews before applying.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

[PATCH v2 2/5] arm64: dts: renesas: r8a77980: add VSPD support

[Simon Horman]

[CC Laurent, Geert]

On Thu, Jun 07, 2018 at 11:20:47PM +0300, Sergei Shtylyov wrote:
> Describe VSPD0 in the R8A77980 device tree; it will be used by DU in
> the next patch...
> 
> Based on the original (and large) patch by Vladimir Barinov.
> 
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> ---
>  arch/arm64/boot/dts/renesas/r8a77980.dtsi |   10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> @@ -653,6 +653,16 @@
>  			resets = <&cpg 408>;
>  		};
>  
> +		vspd0: vsp at fea20000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xfea20000 0 0x4000>;

As per "[PATCH] arm64: dts: renesas: Fix VSPD registers range"
I think the width of the range should be 0x5000.

> +			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 623>;
> +			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> +			resets = <&cpg 623>;
> +			renesas,fcp = <&fcpvd0>;
> +		};
> +
>  		fcpvd0: fcp at fea27000 {
>  			compatible = "renesas,fcpv";
>  			reg = <0 0xfea27000 0 0x200>;
> 

[PATCH v2 2/5] arm64: dts: renesas: r8a77980: add VSPD support

[Laurent Pinchart]

Hello Simon,

On Friday, 8 June 2018 16:54:56 EEST Simon Horman wrote:
> [CC Laurent, Geert]
> 
> On Thu, Jun 07, 2018 at 11:20:47PM +0300, Sergei Shtylyov wrote:
> > Describe VSPD0 in the R8A77980 device tree; it will be used by DU in
> > the next patch...
> > 
> > Based on the original (and large) patch by Vladimir Barinov.
> > 
> > Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> > 
> > ---
> > 
> >  arch/arm64/boot/dts/renesas/r8a77980.dtsi |   10 ++++++++++
> >  1 file changed, 10 insertions(+)
> > 
> > Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> > ===================================================================
> > --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> > +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> > @@ -653,6 +653,16 @@
> >  			resets = <&cpg 408>;
> >  		};
> > 
> > +		vspd0: vsp at fea20000 {
> > +			compatible = "renesas,vsp2";
> > +			reg = <0 0xfea20000 0 0x4000>;
> 
> As per "[PATCH] arm64: dts: renesas: Fix VSPD registers range"
> I think the width of the range should be 0x5000.

I agree with that.

> > +			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&cpg CPG_MOD 623>;
> > +			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> > +			resets = <&cpg 623>;
> > +			renesas,fcp = <&fcpvd0>;
> > +		};
> > +
> >  		fcpvd0: fcp at fea27000 {
> >  			compatible = "renesas,fcpv";
> >  			reg = <0 0xfea27000 0 0x200>;

-- 
Regards,

Laurent Pinchart

[PATCH v2 3/5] arm64: dts: renesas: r8a77980: add DU support

[Laurent Pinchart]

Hi Sergei,

Thank you for the patch.

On Thursday, 7 June 2018 23:21:38 EEST Sergei Shtylyov wrote:
> Define the generic R8A77980 part of the DU device node.
> 
> Based on the original (and large) patch by Vladimir Barinov.
> 
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  arch/arm64/boot/dts/renesas/r8a77980.dtsi |   30 ++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> @@ -671,6 +671,36 @@
>  			resets = <&cpg 603>;
>  		};
> 
> +		du: display at feb00000 {
> +			compatible = "renesas,du-r8a77980",
> +				     "renesas,du-r8a77970";
> +			reg = <0 0xfeb00000 0 0x80000>;
> +			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 724>;
> +			clock-names = "du.0";
> +			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> +			resets = <&cpg 724>;
> +			vsps = <&vspd0>;
> +			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port at 0 {
> +					reg = <0>;
> +					du_out_rgb: endpoint {
> +					};
> +				};
> +
> +				port at 1 {
> +					reg = <1>;
> +					du_out_lvds0: endpoint {
> +					};
> +				};
> +			};
> +		};
> +
>  		prr: chipid at fff00044 {
>  			compatible = "renesas,prr";
>  			reg = <0 0xfff00044 0 4>;

-- 
Regards,

Laurent Pinchart

[PATCH v2 1/5] arm64: dts: renesas: r8a77980: add FCPVD support

[Laurent Pinchart]

Hi Sergei,

Thank you for the patch.

On Thursday, 7 June 2018 23:19:31 EEST Sergei Shtylyov wrote:
> Describe FCPVD0 in the R8A77980 device tree; it will be used by VSPD0 in
> the next patch...
> 
> Based on the original (and large) patch by Vladimir Barinov.
> 
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  arch/arm64/boot/dts/renesas/r8a77980.dtsi |    8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> @@ -653,6 +653,14 @@
>  			resets = <&cpg 408>;
>  		};
> 
> +		fcpvd0: fcp at fea27000 {
> +			compatible = "renesas,fcpv";
> +			reg = <0 0xfea27000 0 0x200>;
> +			clocks = <&cpg CPG_MOD 603>;
> +			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> +			resets = <&cpg 603>;
> +		};
> +
>  		prr: chipid at fff00044 {
>  			compatible = "renesas,prr";
>  			reg = <0 0xfff00044 0 4>;

-- 
Regards,

Laurent Pinchart

[PATCH v2 4/5] arm64: dts: renesas: r8a77980: add LVDS support

[Laurent Pinchart]

Hi Sergei,

Thank you for the patch.

On Thursday, 7 June 2018 23:23:06 EEST Sergei Shtylyov wrote:
> Define the generic R8A77980 part of the LVDS device node.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  arch/arm64/boot/dts/renesas/r8a77980.dtsi |   29 ++++++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
> 
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> @@ -696,6 +696,35 @@
>  				port at 1 {
>  					reg = <1>;
>  					du_out_lvds0: endpoint {
> +						remote-endpoint = <&lvds0_in>;
> +					};
> +				};
> +			};
> +		};
> +
> +		lvds0: lvds-encoder at feb90000 {
> +			compatible = "renesas,r8a77980-lvds";
> +			reg = <0 0xfeb90000 0 0x14>;
> +			clocks = <&cpg CPG_MOD 727>;
> +			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> +			resets = <&cpg 727>;
> +			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port at 0 {
> +					reg = <0>;
> +					lvds0_in: endpoint {
> +						remote-endpoint =
> +							<&du_out_lvds0>;
> +					};
> +				};
> +
> +				port at 1 {
> +					reg = <1>;
> +					lvds0_out: endpoint {
>  					};
>  				};
>  			};

-- 
Regards,

Laurent Pinchart

[PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support

[Laurent Pinchart]

Hi Sergei,

On Thursday, 7 June 2018 23:17:03 EEST Sergei Shtylyov wrote:
> Hello!
> 
> Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
> 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
> DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
> connected to the LVDS output. These patches depend on the Thine THC63LVD1024
> driver and the R8A77980 LVDS support patch in order to work, and R8A77980
> GPIO DT patches in order to apply/compile...
> 
> [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
> [2/5] arm64: dts: renesas: r8a77980: add VSPD support
> [3/5] arm64: dts: renesas: r8a77980: add DU support
> [4/5] arm64: dts: renesas: r8a77980: add LVDS support

Based on the recent request of the ARM SoC maintainers to avoid a plethora of 
small patches, I think you can squash 1/5 to 4/5 all together.

> [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support

-- 
Regards,

Laurent Pinchart

[PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support

[Simon Horman]

On Fri, Jun 08, 2018 at 05:27:19PM +0300, Laurent Pinchart wrote:
> Hi Sergei,
> 
> On Thursday, 7 June 2018 23:17:03 EEST Sergei Shtylyov wrote:
> > Hello!
> > 
> > Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
> > 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
> > DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
> > connected to the LVDS output. These patches depend on the Thine THC63LVD1024
> > driver and the R8A77980 LVDS support patch in order to work, and R8A77980
> > GPIO DT patches in order to apply/compile...
> > 
> > [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
> > [2/5] arm64: dts: renesas: r8a77980: add VSPD support
> > [3/5] arm64: dts: renesas: r8a77980: add DU support
> > [4/5] arm64: dts: renesas: r8a77980: add LVDS support
> 
> Based on the recent request of the ARM SoC maintainers to avoid a plethora of 
> small patches, I think you can squash 1/5 to 4/5 all together.

Agreed.

Seregi could you please post a v2 with patches 1 - 4 squashed and the
register range for VSPD0 reduced to 0x5000? Thanks!

> > [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support

[PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support

[Sergei Shtylyov]

On 06/11/2018 11:15 AM, Simon Horman wrote:

>>> Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
>>> 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
>>> DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
>>> connected to the LVDS output. These patches depend on the Thine THC63LVD1024
>>> driver and the R8A77980 LVDS support patch in order to work, and R8A77980
>>> GPIO DT patches in order to apply/compile...
>>>
>>> [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
>>> [2/5] arm64: dts: renesas: r8a77980: add VSPD support
>>> [3/5] arm64: dts: renesas: r8a77980: add DU support
>>> [4/5] arm64: dts: renesas: r8a77980: add LVDS support
>>
>> Based on the recent request of the ARM SoC maintainers to avoid a plethora of 
>> small patches, I think you can squash 1/5 to 4/5 all together.
> 
> Agreed.
> 
> Seregi could you please post a v2 with patches 1 - 4 squashed and the

   It's going to be v3 already. :-)

> register range for VSPD0 reduced to 0x5000? Thanks!

   More like increased. :-)
   Working on it...

>>> [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support

MBR, Sergei