[PATCH v3 0/3] board: sunxi: Add TaiqiCat (TQC) A01

[PATCH v3 0/3] board: sunxi: Add TaiqiCat (TQC) A01

[Jun Yan]

This series adds support for the TaiqiCat (TQC) A01 — 
a set-top box based on the Allwinner H6 SoC. 
Originally released by Ultrapower(UQSoft) as a blockchain terminal, 
the device has been discontinued and is no longer officially
supported.
  
  https://web.archive.org/web/20190409213228/https://tq.ultrapower.com.cn/product.html

Changes in v3:
- Drop the serial1 alias.
- Add an ethernet0 alias for WiFi.
- Link to v2: https://lore.kernel.org/all/20260227155801.211376-1-jerrysteve1101@gmail.com

Changes in v2:                                                              
- Replace "UQSoft" with "Ultrapower", and add relevant explanations.
- Link to v1: https://lore.kernel.org/all/20260226084850.417731-1-jerrysteve1101@gmail.com

Jun Yan (3):
  dt-bindings: vendor-prefixes: Add Beijing Ultrapower Software Co.,
    Ltd.
  dt-bindings: arm: sunxi: Add TaiqiCat (TQC) A01
  arm64: dts: allwinner: h6: Add TaiqiCat (TQC) A01 support

 .../devicetree/bindings/arm/sunxi.yaml        |   5 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/allwinner/Makefile        |   1 +
 .../dts/allwinner/sun50i-h6-taiqicat-a01.dts  | 361 ++++++++++++++++++
 4 files changed, 369 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts

-- 
2.53.0

[PATCH v3 1/3] dt-bindings: vendor-prefixes: Add Beijing Ultrapower Software Co., Ltd.

[Jun Yan]

Beijing Ultrapower Software Co., Ltd. is a company focusing on global
mobile games, ICT services, cloud computing, and artificial intelligence
solutions.

TaiqiCat A01 is a blockchain-based terminal product launched by UQSoft
(Beijing UQSoft Interactive Technology Co., Ltd.), a wholly-owned
subsidiary of Ultrapower. Its dedicated product homepage[1] was once
hosted on Ultrapower’s official website[2].

It should be noted that UQSoft's official website[3] is no longer
operational, and the company appears to have been discontinued.

[1] https://web.archive.org/web/20190409213228/https://tq.ultrapower.com.cn/product.html
[2] https://www.ultrapower.com.cn
[3] http://www.uqsoft.com

Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index ee7fd3cfe203..bb16ae90a4f6 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1731,6 +1731,8 @@ patternProperties:
     description: Ufi Space Co., Ltd.
   "^ugoos,.*":
     description: Ugoos Industrial Co., Ltd.
+  "^ultrapower,.*":
+    description: Beijing Ultrapower Software Co., Ltd.
   "^uni-t,.*":
     description: Uni-Trend Technology (China) Co., Ltd.
   "^uniwest,.*":
-- 
2.53.0

[PATCH v3 2/3] dt-bindings: arm: sunxi: Add TaiqiCat (TQC) A01

[Jun Yan]

TaiqiCat (TQC) A01 is a set-top box powered by an Allwinner H6 SoC,
equipped with an AXP305 PMIC, 1GB LPDDR3 RAM, 8GB eMMC, an AP6212
WiFi/BT combo module, one 100M Ethernet port, one USB 3.0 Type-A port,
one USB 2.0 Type-A port, one Micro USB port, HDMI, SPDIF, Micro-SD, and
infrared input.

It is a blockchain-based terminal product launched by UQSoft
(Beijing UQSoft Interactive Technology Co., Ltd.), a wholly-owned
subsidiary of Ultrapower. Its dedicated product homepage[1] was once
hosted on Ultrapower’s official website[2].

It should be noted that UQSoft's official website[3] is no longer
operational, and the company appears to have been discontinued.

[1] https://web.archive.org/web/20190409213228/https://tq.ultrapower.com.cn/product.html
[2] https://www.ultrapower.com.cn
[3] http://www.uqsoft.com

Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 Documentation/devicetree/bindings/arm/sunxi.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 9e4627f97d7e..e6443c266fa1 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -901,6 +901,11 @@ properties:
           - const: allwinner,sl631
           - const: allwinner,sun8i-v3
 
+      - description: TaiqiCat A01
+        items:
+          - const: ultrapower,taiqicat-a01
+          - const: allwinner,sun50i-h6
+
       - description: Tanix TX1
         items:
           - const: oranth,tanix-tx1
-- 
2.53.0

[PATCH v3 3/3] arm64: dts: allwinner: h6: Add TaiqiCat (TQC) A01 support

[Jun Yan]

TaiqiCat (TQC) A01 is a set-top box powered by an Allwinner H6 SoC,
equipped with an AXP305 PMIC, 1GB LPDDR3 RAM, 8GB eMMC, an AP6212
WiFi/BT combo module, one 100M Ethernet port, one USB 3.0 Type-A port,
one USB 2.0 Type-A port, one Micro USB port, HDMI, SPDIF, Micro-SD, and
infrared input.

It was released by Ultrapower(UQSoft) as a blockchain-based terminal and is
now discontinued and no longer supported.

  https://web.archive.org/web/20190409213228/https://tq.ultrapower.com.cn/product.html

Hardware schematics are not available at this time; however, the
dts from the vendor firmware is provided for reference [1].

Based on the PCB silkscreen marking "AZW-KT02 2.0", the ODM/OEM
can be confirmed as AZW, and the overall hardware circuit design
is highly similar to the Beelink GS1.

Tested, works:
- debug UART
- status LED
- USB 3.0 Type-A port
- USB 2.0 Type-A port
- Micro USB port (Host)
- MicroSD
- eMMC
- WiFi/Bluetooth
- HDMI video output

Does not work:
- Ethernet (requires AC200 MFD/EPHY driver)
- HDMI audio

Untested:
- SPDIF
- IR receiver

[1] https://archive.org/download/tqc-a01-stock-fw/tqc-a01-stock-fw.dts

Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
---
 arch/arm64/boot/dts/allwinner/Makefile        |   1 +
 .../dts/allwinner/sun50i-h6-taiqicat-a01.dts  | 361 ++++++++++++++++++
 2 files changed, 362 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 2edfa7bf4ab3..d116864b6c2b 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-taiqicat-a01.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-tanix-tx1.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
new file mode 100644
index 000000000000..3138292abb45
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2026 Jun Yan <jerrysteve1101@gmail.com>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+#include "sun50i-h6-gpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "TaiqiCat (TQC) A01";
+	compatible = "ultrapower,taiqicat-a01", "allwinner,sun50i-h6";
+
+	aliases {
+		ethernet0 = &sdio_wifi;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ext_osc32k: ext-osc32k-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "taiqicat:blue:power";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+			default-state = "on";
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun50i-h6-spdif";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&de {
+	status = "okay";
+};
+
+&dwc3 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_bldo2>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_bldo3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_cldo1>;
+	vqmmc-supply = <&reg_bldo2>;
+	cap-mmc-hw-reset;
+	non-removable;
+	mmc-hs200-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_bldo2>;
+	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_bldo3>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp805: pmic@36 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x36>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-led-ir-pg-pm-ts";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-ac200";
+				regulator-enable-ramp-delay = <100000>;
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18-dram-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pc-emmc-efuse-hdmi";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-wifiio";
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart";
+			};
+
+			/* This regulator is connected with CLDO3 */
+			reg_cldo2: cldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-1";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys-hdmi-usb";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * PL0 and PL1 are used for PMIC I2C
+	 * don't enable the pl-supply else
+	 * it will fail at boot
+	 *
+	 * vcc-pl-supply = <&reg_aldo1>;
+	 */
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a1-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_cldo3>;
+		vddio-supply = <&reg_bldo3>;
+		device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+		host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+		shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+		max-speed = <1500000>;
+	};
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb3_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
+
+&usb3phy {
+	status = "okay";
+};
-- 
2.53.0

Re: [PATCH v3 3/3] arm64: dts: allwinner: h6: Add TaiqiCat (TQC) A01 support

[Jernej Škrabec]

Dne ponedeljek, 2. marec 2026 ob 03:09:56 Srednjeevropski standardni čas je Jun Yan napisal(a):
> TaiqiCat (TQC) A01 is a set-top box powered by an Allwinner H6 SoC,
> equipped with an AXP305 PMIC, 1GB LPDDR3 RAM, 8GB eMMC, an AP6212
> WiFi/BT combo module, one 100M Ethernet port, one USB 3.0 Type-A port,
> one USB 2.0 Type-A port, one Micro USB port, HDMI, SPDIF, Micro-SD, and
> infrared input.
> 
> It was released by Ultrapower(UQSoft) as a blockchain-based terminal and is
> now discontinued and no longer supported.
> 
>   https://web.archive.org/web/20190409213228/https://tq.ultrapower.com.cn/product.html
> 
> Hardware schematics are not available at this time; however, the
> dts from the vendor firmware is provided for reference [1].
> 
> Based on the PCB silkscreen marking "AZW-KT02 2.0", the ODM/OEM
> can be confirmed as AZW, and the overall hardware circuit design
> is highly similar to the Beelink GS1.
> 
> Tested, works:
> - debug UART
> - status LED
> - USB 3.0 Type-A port
> - USB 2.0 Type-A port
> - Micro USB port (Host)
> - MicroSD
> - eMMC
> - WiFi/Bluetooth
> - HDMI video output
> 
> Does not work:
> - Ethernet (requires AC200 MFD/EPHY driver)
> - HDMI audio
> 
> Untested:
> - SPDIF
> - IR receiver
> 
> [1] https://archive.org/download/tqc-a01-stock-fw/tqc-a01-stock-fw.dts
> 
> Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
> ---
>  arch/arm64/boot/dts/allwinner/Makefile        |   1 +
>  .../dts/allwinner/sun50i-h6-taiqicat-a01.dts  | 361 ++++++++++++++++++
>  2 files changed, 362 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
> 
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> index 2edfa7bf4ab3..d116864b6c2b 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-taiqicat-a01.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-tanix-tx1.dtb
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
> new file mode 100644
> index 000000000000..3138292abb45
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
> @@ -0,0 +1,361 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (C) 2026 Jun Yan <jerrysteve1101@gmail.com>
> +
> +/dts-v1/;
> +
> +#include "sun50i-h6.dtsi"
> +#include "sun50i-h6-cpu-opp.dtsi"
> +#include "sun50i-h6-gpu-opp.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	model = "TaiqiCat (TQC) A01";
> +	compatible = "ultrapower,taiqicat-a01", "allwinner,sun50i-h6";
> +
> +	aliases {
> +		ethernet0 = &sdio_wifi;

Wifi has alias ethernet1 on H6.

Other that that, it looks good. With that fixed:
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

Re: [PATCH v3 3/3] arm64: dts: allwinner: h6: Add TaiqiCat (TQC) A01 support

[Jun Yan]

> Dne ponedeljek, 2. marec 2026 ob 03:09:56 Srednjeevropski standardni =C4=8D=
> as je Jun Yan napisal(a):
> > TaiqiCat (TQC) A01 is a set-top box powered by an Allwinner H6 SoC,
> > equipped with an AXP305 PMIC, 1GB LPDDR3 RAM, 8GB eMMC, an AP6212
> > WiFi/BT combo module, one 100M Ethernet port, one USB 3.0 Type-A port,
> > one USB 2.0 Type-A port, one Micro USB port, HDMI, SPDIF, Micro-SD, and
> > infrared input.
> >=20
> > It was released by Ultrapower(UQSoft) as a blockchain-based terminal and =
> is
> > now discontinued and no longer supported.
> >=20
> >   https://web.archive.org/web/20190409213228/https://tq.ultrapower.com.cn=
> /product.html
> >=20
> > Hardware schematics are not available at this time; however, the
> > dts from the vendor firmware is provided for reference [1].
> >=20
> > Based on the PCB silkscreen marking "AZW-KT02 2.0", the ODM/OEM
> > can be confirmed as AZW, and the overall hardware circuit design
> > is highly similar to the Beelink GS1.
> >=20
> > Tested, works:
> > - debug UART
> > - status LED
> > - USB 3.0 Type-A port
> > - USB 2.0 Type-A port
> > - Micro USB port (Host)
> > - MicroSD
> > - eMMC
> > - WiFi/Bluetooth
> > - HDMI video output
> >=20
> > Does not work:
> > - Ethernet (requires AC200 MFD/EPHY driver)
> > - HDMI audio
> >=20
> > Untested:
> > - SPDIF
> > - IR receiver
> >=20
> > [1] https://archive.org/download/tqc-a01-stock-fw/tqc-a01-stock-fw.dts
> >=20
> > Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
> > Reviewed-by: Andre Przywara <andre.przywara@arm.com>
> > ---
> >  arch/arm64/boot/dts/allwinner/Makefile        |   1 +
> >  .../dts/allwinner/sun50i-h6-taiqicat-a01.dts  | 361 ++++++++++++++++++
> >  2 files changed, 362 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.=
> dts
> >=20
> > diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts=
> /allwinner/Makefile
> > index 2edfa7bf4ab3..d116864b6c2b 100644
> > --- a/arch/arm64/boot/dts/allwinner/Makefile
> > +++ b/arch/arm64/boot/dts/allwinner/Makefile
> > @@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_SUNXI) +=3D sun50i-h6-orangepi-lite2.=
> dtb
> >  dtb-$(CONFIG_ARCH_SUNXI) +=3D sun50i-h6-orangepi-one-plus.dtb
> >  dtb-$(CONFIG_ARCH_SUNXI) +=3D sun50i-h6-pine-h64.dtb
> >  dtb-$(CONFIG_ARCH_SUNXI) +=3D sun50i-h6-pine-h64-model-b.dtb
> > +dtb-$(CONFIG_ARCH_SUNXI) +=3D sun50i-h6-taiqicat-a01.dtb
> >  dtb-$(CONFIG_ARCH_SUNXI) +=3D sun50i-h6-tanix-tx6.dtb
> >  dtb-$(CONFIG_ARCH_SUNXI) +=3D sun50i-h6-tanix-tx6-mini.dtb
> >  dtb-$(CONFIG_ARCH_SUNXI) +=3D sun50i-h313-tanix-tx1.dtb
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts b/a=
> rch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
> > new file mode 100644
> > index 000000000000..3138292abb45
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
> > @@ -0,0 +1,361 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +// Copyright (C) 2026 Jun Yan <jerrysteve1101@gmail.com>
> > +
> > +/dts-v1/;
> > +
> > +#include "sun50i-h6.dtsi"
> > +#include "sun50i-h6-cpu-opp.dtsi"
> > +#include "sun50i-h6-gpu-opp.dtsi"
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +
> > +/ {
> > +	model =3D "TaiqiCat (TQC) A01";
> > +	compatible =3D "ultrapower,taiqicat-a01", "allwinner,sun50i-h6";
> > +
> > +	aliases {
> > +		ethernet0 =3D &sdio_wifi;
> 
> Wifi has alias ethernet1 on H6.

Acknowledged. This will be fixed in PATCH V4.

> 
> Other that that, it looks good. With that fixed:
> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> 
> Best regards,
> Jernej