linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: james.morse@arm.com (James Morse)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/3] arm64: mm: Support Common Not Private translations
Date: Wed, 18 Oct 2017 16:00:14 +0100	[thread overview]
Message-ID: <59E76C7E.2060108@arm.com> (raw)
In-Reply-To: <1507724395-13735-2-git-send-email-vladimir.murzin@arm.com>

Hi Vladimir,

On 11/10/17 13:19, Vladimir Murzin wrote:
> Common Not Private (CNP) is a feature of ARMv8.2 extension which
> allows translation table entries to be shared between different PEs in
> the same inner shareable domain, so the hardware can use this fact to
> optimise the caching of such entries in the TLB.
> 
> CNP occupies one bit in TTBRx_ELy and VTTBR_EL2, which advertises to
> the hardware that the translation table entries pointed to by this
> TTBR are the same as every PE in the same inner shareable domain for
> which the equivalent TTBR also has CNP bit set. In case CNP bit is set
> but TTBR does not point at the same translation table entries or a
> given ASID and VMID, then the system is mis-configured, so the results
> of translations are UNPREDICTABLE.
> 
> This patch adds support for Common Not Private translations on
> different exceptions levels:
> 
> (1) For EL0 there are a few cases we need to care of changes in
>     TTBR0_EL1:
>     - a switch to idmap
>     - software emulated PAN
>     we rule out latter via Kconfig options and for the former we make
>     sure that CNP is set for non-zero ASIDs only.

I've been looking at how CNP interacts with the asid allocator. I think we
depend on a subtlety that wasn't obvious to me at first.

Can you check I'm reading this properly:
The ARM-ARM's 'D4.8.1 Use of ASIDs and VMIDs to reduce TLB maintenance
requirements' reads as if you can only share a TLB entry if both CPUs are using
that ASID at the same time:

> When the value of a TTBR_ELx.CnP field is 1,

(on CPU-A)

> translation table entries pointed to by that TTBR_ELx are shared with all
> other PEs in the Inner Shareable domain for which the following conditions
> are met:

>         The corresponding TTBR_ELx.CnP field has the value 1.

(CPU-B's corresponding TTBR right?)

This would suggest CPU-A stops sharing its TLB entries for an asid when it
changes asid by scheduling a new task. A single-threaded task would never
benefit from CNP.


We will depend on this behaviour when we re-use an asid that was previously used
on a remote CPU that hasn't yet noticed the rollover and invalidated its TLB.


> diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c
> index 1e3be90..f28c44a 100644
> --- a/arch/arm64/kernel/suspend.c
> +++ b/arch/arm64/kernel/suspend.c
> @@ -46,6 +46,9 @@ void notrace __cpu_suspend_exit(void)
>  	 */
>  	cpu_uninstall_idmap();


> +	/* Restore CnP bit in TTBR1_EL1 */
> +	cpu_replace_ttbr1(lm_alias(swapper_pg_dir));

Could you wrap this in system_supports_cnp(). Otherwise it replaces ttbr1
unnecessarily.

This function is called with the idmap loaded, it seems unnecessary to remove it
twice. You could refactor cpu_replace_ttbr1() to have a __version that is called
with the idmap loaded, then call that before the cpu_uninstall_idmap() above.


Thanks,

James

  reply	other threads:[~2017-10-18 15:00 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-11 12:19 [PATCH v2 0/3] Support Common Not Private translations Vladimir Murzin
2017-10-11 12:19 ` [PATCH v2 1/3] arm64: mm: " Vladimir Murzin
2017-10-18 15:00   ` James Morse [this message]
2017-12-13 14:19   ` James Morse
2017-12-13 16:59     ` Vladimir Murzin
2017-10-11 12:19 ` [PATCH v2 2/3] arm64: KVM: " Vladimir Murzin
2017-10-11 12:19 ` [PATCH v2 3/3] arm64: Introduce command line parameter to disable CNP Vladimir Murzin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=59E76C7E.2060108@arm.com \
    --to=james.morse@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).