From: cw00.choi@samsung.com (Chanwoo Choi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] arm64: dts: exynos: Use lower case hex addresses in node unit addresses
Date: Thu, 21 Dec 2017 09:51:21 +0900 [thread overview]
Message-ID: <5A3B0589.8010106@samsung.com> (raw)
In-Reply-To: <20171220192702.32515-1-krzk@kernel.org>
Dear Krzysztof,
On 2017? 12? 21? 04:27, Krzysztof Kozlowski wrote:
> Convert all hex addresses in node unit addresses to lower case to
> fix warnings like:
> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dtb: Warning (simple_bus_reg):
> Node /soc/video-scaler at 13C00000 simple-bus unit address format error, expected "13c00000"
>
> Conversion was done using sed:
> $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm64/boot/dts/exynos/*.dts*
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> arch/arm64/boot/dts/exynos/exynos5433.dtsi | 8 ++++----
> arch/arm64/boot/dts/exynos/exynos7.dtsi | 4 ++--
> 2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> index 1962b8074349..0ba5df825eff 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -994,7 +994,7 @@
> reg = <0x145f0000 0x1038>;
> };
>
> - gsc_0: video-scaler at 13C00000 {
> + gsc_0: video-scaler at 13c00000 {
> compatible = "samsung,exynos5433-gsc";
> reg = <0x13c00000 0x1000>;
> interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1008,7 +1008,7 @@
> power-domains = <&pd_gscl>;
> };
>
> - gsc_1: video-scaler at 13C10000 {
> + gsc_1: video-scaler at 13c10000 {
> compatible = "samsung,exynos5433-gsc";
> reg = <0x13c10000 0x1000>;
> interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1022,7 +1022,7 @@
> power-domains = <&pd_gscl>;
> };
>
> - gsc_2: video-scaler at 13C20000 {
> + gsc_2: video-scaler at 13c20000 {
> compatible = "samsung,exynos5433-gsc";
> reg = <0x13c20000 0x1000>;
> interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1049,7 +1049,7 @@
> power-domains = <&pd_mscl>;
> };
>
> - mfc: codec at 152E0000 {
> + mfc: codec at 152e0000 {
> compatible = "samsung,exynos5433-mfc";
> reg = <0x152E0000 0x10000>;
> interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index 9a3fbed1765a..3504837b1d43 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -103,7 +103,7 @@
> #size-cells = <1>;
> ranges;
>
> - pdma0: pdma at 10E10000 {
> + pdma0: pdma at 10e10000 {
> compatible = "arm,pl330", "arm,primecell";
> reg = <0x10E10000 0x1000>;
> interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
> @@ -114,7 +114,7 @@
> #dma-requests = <32>;
> };
>
> - pdma1: pdma at 10EB0000 {
> + pdma1: pdma at 10eb0000 {
> compatible = "arm,pl330", "arm,primecell";
> reg = <0x10EB0000 0x1000>;
> interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
>
Looks good to me.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
prev parent reply other threads:[~2017-12-21 0:51 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20171220192737epcas4p17c4e71c11e5864fd59f06396c0867a3a@epcas4p1.samsung.com>
2017-12-20 19:27 ` [PATCH 1/2] arm64: dts: exynos: Use lower case hex addresses in node unit addresses Krzysztof Kozlowski
2017-12-20 19:27 ` [PATCH 2/2] arm64: dts: exynos: Fix typo in MSCL clock controller unit address Krzysztof Kozlowski
2017-12-21 0:54 ` Chanwoo Choi
2017-12-21 0:51 ` Chanwoo Choi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5A3B0589.8010106@samsung.com \
--to=cw00.choi@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).