From: thunder.leizhen@huawei.com (Leizhen (ThunderTown))
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/1] iommu/arm-smmu-v3: eliminate a potential memory corruption on Hi16xx soc
Date: Tue, 16 Oct 2018 17:19:14 +0800 [thread overview]
Message-ID: <5BC5AD12.1010701@huawei.com> (raw)
In-Reply-To: <4583617a-49ad-00b5-97fc-1ea35568c5cd@huawei.com>
On 2018/10/15 19:17, John Garry wrote:
> On 15/10/2018 09:36, Zhen Lei wrote:
>> ITS translation register map:
>> 0x0000-0x003C Reserved
>> 0x0040 GITS_TRANSLATER
>> 0x0044-0xFFFC Reserved
>>
>
> Can you add a better opening than the ITS translation register map?
OK
>
>> The standard GITS_TRANSLATER register in ITS is only 4 bytes, but Hisilicon
>> expands the next 4 bytes to carry some IMPDEF information. That means, 8 bytes
>> data will be written to MSIAddress each time.
>>
>> MSIAddr: |----4bytes----|----4bytes----|
>> | MSIData | IMPDEF |
>>
>> There is no problem for ITS, because the next 4 bytes space is reserved in ITS.
>> But it will overwrite the 4 bytes memory following "sync_count". It's very
>
> I think arm_smmu_device.sync_count is better, or "sync_count member in the the smmu driver control struct".
OK, I will use "struct" in v2.
+ struct {
u32 sync_count;
+ u32 padding;
+ } __attribute__((aligned(8)));
>
>> luckly that the previous and the next neighbour of "sync_count" are both aligned
>
> /s/luckly/luckily or fortunately/
OK, thanks
>
>> by 8 bytes, so no problem is met now.
>>
>> It's good to explicitly add a workaround:
>> 1. Add gcc __attribute__((aligned(8))) to make sure that "sync_count" is always
>> aligned by 8 bytes.
>> 2. Add a "u64" union member to make sure the 4 bytes padding is always exist.
>>
>> There is no functional change.
>>
>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>> ---
>> drivers/iommu/arm-smmu-v3.c | 3 +++
>> 1 file changed, 3 insertions(+)
>>
>> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
>> index 5059d09..a07bc0d 100644
>> --- a/drivers/iommu/arm-smmu-v3.c
>> +++ b/drivers/iommu/arm-smmu-v3.c
>> @@ -586,7 +586,10 @@ struct arm_smmu_device {
>>
>> struct arm_smmu_strtab_cfg strtab_cfg;
>>
>> + union {
>> + u64 padding; /* workaround for Hisilicon */
>
> I think that a more detailed comment is required.
OK, I will try to describe it more clearly.
>
>> u32 sync_count;
>
> Can you indent these 2 members? However - as discussed internally - this may have endian issue so better to declare full 64b struct.
These indent is inherited, to keep aligning with other members.
There is no endian issue, I have tested it on both little-endian and big-endian.
$gdb vmlinux
......
(gdb) p &((struct arm_smmu_device *)0)->sync_count
$1 = (u32 *) 0x4178
(gdb) p &((struct arm_smmu_device *)0)->tst1
$2 = (int *) 0x4170
(gdb) p &((struct arm_smmu_device *)0)->tst2
$3 = (int *) 0x4180
------------testcase--------
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index 5059d09..7c6f7ac 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -586,7 +586,14 @@ struct arm_smmu_device {
struct arm_smmu_strtab_cfg strtab_cfg;
+ int tst1;
+
+ union {
+ u64 padding;
u32 sync_count;
+ } __attribute__((aligned(8)));
+
+ int tst2;
/* IOMMU core code handle */
struct iommu_device iommu;
>
>> + } __attribute__((aligned(8)));
>>
>> /* IOMMU core code handle */
>> struct iommu_device iommu;
>>
> Thanks
>
>
>
>
> .
>
--
Thanks!
BestRegards
next prev parent reply other threads:[~2018-10-16 9:19 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-15 8:36 [PATCH 1/1] iommu/arm-smmu-v3: eliminate a potential memory corruption on Hi16xx soc Zhen Lei
2018-10-15 11:17 ` John Garry
2018-10-16 9:19 ` Leizhen (ThunderTown) [this message]
2018-10-15 12:46 ` Andrew Murray
2018-10-16 10:02 ` Leizhen (ThunderTown)
2018-10-15 13:52 ` Robin Murphy
2018-10-16 9:27 ` Leizhen (ThunderTown)
2018-10-15 17:21 ` Will Deacon
2018-10-15 17:36 ` Robin Murphy
2018-10-16 10:08 ` Will Deacon
2018-10-16 9:41 ` Leizhen (ThunderTown)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5BC5AD12.1010701@huawei.com \
--to=thunder.leizhen@huawei.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).