[PATCH 1/5] dt-bindings: spi/spi-pxa2xx: add PXA2xx SSP SPI Controller

[robh@kernel.org (Rob Herring)]

On Mon, Sep 10, 2018 at 01:59:31PM +0200, Lubomir Rintel wrote:
> This is the SPI controller found on Marvel MMP2 and perhaps more
> platforms.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> ---
>  .../devicetree/bindings/spi/spi-pxa2xx.txt    | 24 +++++++++++++++++++
>  1 file changed, 24 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
> 
> diff --git a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
> new file mode 100644
> index 000000000000..75be87cf9909
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
> @@ -0,0 +1,24 @@
> +PXA2xx SSP SPI Controller
> +
> +Required properties:
> +- compatible: Must be "marvell,mmp2-ssp".
> +- reg: Offset and length of the device's register set.
> +- interrupts: Should be the interrupt number.
> +- clocks: Should contain a single entry describing the clock input.
> +- #address-cells:  Number of cells required to define a chip select address.
> +- #size-cells: Should be zero.
> +
> +Optional properties:
> +- cs-gpios: list of GPIO chip selects. See the SPI bus bindings,
> +  Documentation/devicetree/bindings/spi/spi-bus.txt
> +
> +Child nodes represent devices on the SPI bus
> +  See ../spi/spi-bus.txt
> +
> +Example:
> +	ssp1: ssp at d4035000 {

spi at ...

Otherwise,

Reviewed-by: Rob Herring <robh@kernel.org>

> +		compatible = "marvell,mmp2-ssp";
> +		reg = <0xd4035000 0x1000>;
> +		clocks = <&soc_clocks MMP2_CLK_SSP0>;
> +		interrupts = <0>;
> +	};
> -- 
> 2.17.1
>