[PATCH] thermal: bcm2711_thermal: Don't clamp temperature at zero

[PATCH] thermal: bcm2711_thermal: Don't clamp temperature at zero

[Stefan Wahren]

The thermal sensor on BCM2711 is capable of negative temperatures, so don't
clamp the measurements at zero. Since this was the only use for variable t,
drop it.

This change based on a patch by Dom Cobley, who also tested the fix.

Fixes: 59b781352dc4 ("thermal: Add BCM2711 thermal driver")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 drivers/thermal/broadcom/bcm2711_thermal.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/thermal/broadcom/bcm2711_thermal.c b/drivers/thermal/broadcom/bcm2711_thermal.c
index 1ec57d9ecf53..e9bef5c3414b 100644
--- a/drivers/thermal/broadcom/bcm2711_thermal.c
+++ b/drivers/thermal/broadcom/bcm2711_thermal.c
@@ -38,7 +38,6 @@ static int bcm2711_get_temp(void *data, int *temp)
 	int offset = thermal_zone_get_offset(priv->thermal);
 	u32 val;
 	int ret;
-	long t;
 
 	ret = regmap_read(priv->regmap, AVS_RO_TEMP_STATUS, &val);
 	if (ret)
@@ -50,9 +49,7 @@ static int bcm2711_get_temp(void *data, int *temp)
 	val &= AVS_RO_TEMP_STATUS_DATA_MSK;
 
 	/* Convert a HW code to a temperature reading (millidegree celsius) */
-	t = slope * val + offset;
-
-	*temp = t < 0 ? 0 : t;
+	*temp = slope * val + offset;
 
 	return 0;
 }
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] thermal: bcm2711_thermal: Don't clamp temperature at zero

[Florian Fainelli]

On 4/12/2022 12:54 PM, Stefan Wahren wrote:
> The thermal sensor on BCM2711 is capable of negative temperatures, so don't
> clamp the measurements at zero. Since this was the only use for variable t,
> drop it.
> 
> This change based on a patch by Dom Cobley, who also tested the fix.
> 
> Fixes: 59b781352dc4 ("thermal: Add BCM2711 thermal driver")
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] thermal: bcm2711_thermal: Don't clamp temperature at zero

[Daniel Lezcano]

On 12/04/2022 21:54, Stefan Wahren wrote:
> The thermal sensor on BCM2711 is capable of negative temperatures, so don't
> clamp the measurements at zero. Since this was the only use for variable t,
> drop it.
> 
> This change based on a patch by Dom Cobley, who also tested the fix.
> 
> Fixes: 59b781352dc4 ("thermal: Add BCM2711 thermal driver")
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>

Applied, thanks


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel