Re: [PATCH v3] arm64: dts: imx8mp: Add DT overlays for DH i.MX8M Plus DHCOM SoM and boards

[Marek Vasut <marex@nabladev.com>]

On 3/26/26 5:43 AM, Marek Vasut wrote:
> Add DT overlays to support DH i.MX8M Plus DHCOM SoM variants and carrier
> board expansion modules. The following DT overlays are implemented:
> - SoM:
>    - DH 660-x00 SoM with 1xRMII PHY
>    - DH 660-x00 SoM with 2xRMII PHY
> - PDK2:
>    - DH 505-200 Display board in edge connector X12 via direct LVDS
>    - DH 531-100 SPI/I2C board in header X21
>    - DH 531-200 SPI/I2C board in header X22
>    - DH 560-200 Display board in edge connector X12
> - PDK3:
>    - DH 505-200 Display board in edge connector X36 via direct LVDS
>    - DH 531-100 SPI/I2C board in header X40
>    - DH 531-200 SPI/I2C board in header X41
>    - DH 560-300 Display board in edge connector X36
>    - EA muRata 2AE M.2 A/E-Key card in connector X20
>    - NXP SPF-29853-C1 MINISASTOCSI with OV5640 sensor in connector X31
>    - NXP SPF-29853-C1 MINISASTOCSI with OV5640 sensor in connector X29
> - PicoITX:
>    - DH 626-100 Display board in edge connector X2
Hello Frank,

I know I was sending quite a few DTOs recently. Is this set still on 
your review list, or was this one missed ?

Thank you for reviewing the DTOs so actively, it really helps a lot !