public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Dragan Simic <dsimic@manjaro.org>
To: Peter Robinson <pbrobinson@gmail.com>
Cc: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org
Subject: Re: [PATCH] arm64: dts: rockchip: Pinebook Pro: Update WiFi
Date: Tue, 29 Jul 2025 21:24:08 +0200	[thread overview]
Message-ID: <5c3a62a678f6d86e81913700c05e0286@manjaro.org> (raw)
In-Reply-To: <6948463c8ca90bd9c72fb34178ddb029@manjaro.org>

On 2025-07-29 21:10, Dragan Simic wrote:
> Hello Peter,

Sorry, somehow I managed to forget suggesting that the patch
summary should be made a bit more self-descriptive.  At the same
time, including "Pinebook Pro:" as one of the summary prefixes
isn't common, so perhaps this would be a good candidate for the
revised patch summary:

   arm64: dts: rockchip: Describe WiFi wake-up pin for the Pinebook Pro

Obviously, this applies to your PinePhone Pro patch [1] as well.
As a nitpick, please note that the second "p" in "PinePhone" is
actually an uppercase "P".

[1] 
https://lore.kernel.org/linux-rockchip/20250729190712.145817-1-pbrobinson@gmail.com/T/#u

> On 2025-07-29 20:58, Peter Robinson wrote:
>> Update the WiFi configuration to include the wake-up
>> pin and add an ethernet alias to allow assignment of
>> a mac-address from the firmware.
>> 
>> Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
>> ---
>>  .../boot/dts/rockchip/rk3399-pinebook-pro.dts | 19 
>> +++++++++++++++++++
>>  1 file changed, 19 insertions(+)
>> 
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
>> b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
>> index 5a8551d9ffe47..05c48cb09df6f 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
>> @@ -19,6 +19,7 @@ / {
>>  	chassis-type = "laptop";
>> 
>>  	aliases {
>> +		ethernet0 = &brcmf;
> 
> I'm sorry, but this alias isn't acceptable.  In a few words, this
> simply isn't an Ethernet interface.
> 
> We're already stretching a bit the dynamic nature of, well, everything
> with the aliases in the Rockchip DT files, and an alias like this one
> would be stretching the whole thing beyond the breaking point.
> 
>>  		mmc0 = &sdio0;
>>  		mmc1 = &sdmmc;
>>  		mmc2 = &sdhci;
>> @@ -883,6 +884,12 @@ vcc5v0_host_en_pin: vcc5v0-host-en-pin {
>>  		};
>>  	};
>> 
>> +	wifi {
>> +		wifi_host_wake_l: wifi-host-wake-l {
>> +			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
>> +		};
>> +	};
>> +
>>  	wireless-bluetooth {
>>  		bt_wake_pin: bt-wake-pin {
>>  			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
>> @@ -940,7 +947,19 @@ &sdio0 {
>>  	pinctrl-names = "default";
>>  	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
>>  	sd-uhs-sdr104;
>> +	#address-cells = <1>;
>> +	#size-cells = <0>;
>>  	status = "okay";
>> +
>> +	brcmf: wifi@1 {
>> +		reg = <1>;
>> +		compatible = "brcm,bcm4329-fmac";
>> +		interrupt-parent = <&gpio0>;
>> +		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
>> +		interrupt-names = "host-wake";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&wifi_host_wake_l>;
>> +	};
>>  };
>> 
>>  &sdhci {


  reply	other threads:[~2025-07-29 19:26 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-29 18:58 [PATCH] arm64: dts: rockchip: Pinebook Pro: Update WiFi Peter Robinson
2025-07-29 19:10 ` Dragan Simic
2025-07-29 19:24   ` Dragan Simic [this message]
2025-07-29 20:09   ` Peter Robinson
2025-07-29 20:44     ` Dragan Simic

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5c3a62a678f6d86e81913700c05e0286@manjaro.org \
    --to=dsimic@manjaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=heiko@sntech.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=pbrobinson@gmail.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox