From: claudiu beznea <claudiu.beznea@tuxon.dev>
To: Alexander Dahl <ada@thorsis.com>
Cc: Christian Melki <christian.melki@t2data.com>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
"moderated list:MICROCHIP OTPC DRIVER"
<linux-arm-kernel@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v1 08/12] nvmem: microchip-otpc: Add warnings for bad OTPC conditions on probe
Date: Sat, 24 Aug 2024 18:51:46 +0300 [thread overview]
Message-ID: <5d2a6498-57c5-4fb4-9a68-e35072f4b8e3@tuxon.dev> (raw)
In-Reply-To: <20240821105943.230281-9-ada@thorsis.com>
On 21.08.2024 13:59, Alexander Dahl wrote:
> These conditions could affect correct function of the driver.
Can you please detail why this has been added, what was the issue you
identified etc?
>
> Signed-off-by: Alexander Dahl <ada@thorsis.com>
> ---
> drivers/nvmem/microchip-otpc.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/nvmem/microchip-otpc.c b/drivers/nvmem/microchip-otpc.c
> index 4630e96243ac..a80535c3d162 100644
> --- a/drivers/nvmem/microchip-otpc.c
> +++ b/drivers/nvmem/microchip-otpc.c
> @@ -8,6 +8,7 @@
> */
>
> #include <linux/bitfield.h>
> +#include <linux/dev_printk.h>
> #include <linux/iopoll.h>
> #include <linux/module.h>
> #include <linux/nvmem-provider.h>
> @@ -260,6 +261,7 @@ static int mchp_otpc_probe(struct platform_device *pdev)
> struct nvmem_device *nvmem;
> struct mchp_otpc *otpc;
> u32 size;
> + u32 reg;
> int ret;
>
> otpc = devm_kzalloc(&pdev->dev, sizeof(*otpc), GFP_KERNEL);
> @@ -270,6 +272,16 @@ static int mchp_otpc_probe(struct platform_device *pdev)
> if (IS_ERR(otpc->base))
> return PTR_ERR(otpc->base);
>
> + reg = readl_relaxed(otpc->base + MCHP_OTPC_WPSR);
> + if (reg)
> + dev_warn(&pdev->dev,
> + "Write Protection Status Register Bit set: 0x%08x\n", reg);
There are many status bits in WPSR. Some of these bits suggests warnings
even when their values are zero (e.g., ECLASS, SWETYP). I don't know how
accurate is this message.
> +
> + reg = readl_relaxed(otpc->base + MCHP_OTPC_ISR);
> + if (reg & MCHP_OTPC_ISR_COERR)
> + dev_warn(&pdev->dev,
> + "A corruption occurred since the last read of OTPC_ISR.\n");
> +
> otpc->dev = &pdev->dev;
> ret = mchp_otpc_init_packets_list(otpc, &size);
> if (ret)
next prev parent reply other threads:[~2024-08-24 15:52 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-21 10:59 [PATCH v1 00/12] Microchip OTPC driver on SAM9X60 exposing UIDxR as additional nvmem device Alexander Dahl
2024-08-21 10:59 ` [PATCH v1 01/12] nvmem: microchip-otpc: Avoid writing a write-only register Alexander Dahl
2024-08-24 15:51 ` claudiu beznea
2024-08-21 10:59 ` [PATCH v1 02/12] nvmem: microchip-otpc: Fix swapped 'sleep' and 'timeout' parameters Alexander Dahl
2024-08-24 15:52 ` claudiu beznea
2024-08-21 10:59 ` [PATCH v1 03/12] dt-bindings: nvmem: microchip-otpc: Add compatible for SAM9X60 Alexander Dahl
2024-08-21 12:49 ` Rob Herring (Arm)
2024-08-21 14:55 ` Conor Dooley
2024-08-21 10:59 ` [PATCH v1 04/12] nvmem: microchip-otpc: Add SAM9X60 support Alexander Dahl
2024-08-24 15:53 ` claudiu beznea
2024-08-28 8:09 ` Alexander Dahl
2024-08-31 15:31 ` claudiu beznea
2024-08-21 10:59 ` [PATCH v1 06/12] ARM: dts: microchip: sam9x60_curiosity: Enable OTP Controller Alexander Dahl
2024-08-21 10:59 ` [PATCH v1 07/12] nvmem: microchip-otpc: Add missing register definitions Alexander Dahl
2024-08-24 15:54 ` claudiu beznea
2024-08-28 8:14 ` Alexander Dahl
2024-08-31 15:33 ` claudiu beznea
2024-09-02 8:08 ` Alexander Dahl
2024-09-07 12:05 ` claudiu beznea
2024-08-21 10:59 ` [PATCH v1 08/12] nvmem: microchip-otpc: Add warnings for bad OTPC conditions on probe Alexander Dahl
2024-08-24 15:51 ` claudiu beznea [this message]
2024-08-21 10:59 ` [PATCH v1 09/12] clk: at91: sam9x60: Allow enabling main_rc_osc through DT Alexander Dahl
2024-08-21 15:55 ` Conor Dooley
2024-09-19 12:39 ` Alexander Dahl
2024-09-24 15:52 ` Ryan Wanner
2024-09-25 15:24 ` Nicolas Ferre
2024-09-26 7:42 ` claudiu beznea
2024-10-01 15:04 ` Ryan Wanner
2025-02-07 12:41 ` Alexander Dahl
2024-08-21 10:59 ` [PATCH v1 11/12] nvmem: microchip-otpc: Enable main RC oscillator clock Alexander Dahl
2024-08-22 15:57 ` kernel test robot
2024-08-24 15:53 ` claudiu beznea
2024-08-21 10:59 ` [PATCH v1 12/12] nvmem: microchip-otpc: Expose UID registers as 2nd nvmem device Alexander Dahl
2024-08-24 15:50 ` claudiu beznea
2024-08-24 16:17 ` [PATCH v1 00/12] Microchip OTPC driver on SAM9X60 exposing UIDxR as additional " claudiu beznea
2024-08-28 7:31 ` Alexander Dahl
2024-08-31 15:38 ` claudiu beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5d2a6498-57c5-4fb4-9a68-e35072f4b8e3@tuxon.dev \
--to=claudiu.beznea@tuxon.dev \
--cc=ada@thorsis.com \
--cc=christian.melki@t2data.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=srinivas.kandagatla@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).