From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: Vasily Khoruzhick <anarsoul@gmail.com>,
Yangtao Li <tiny.windzz@gmail.com>, Chen-Yu Tsai <wens@csie.org>,
Samuel Holland <samuel@sholland.org>,
Andre Przywara <andre.przywara@arm.com>
Cc: "Rafael J . Wysocki" <rafael@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Zhang Rui <rui.zhang@intel.com>,
Lukasz Luba <lukasz.luba@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Martin Botka <martin.botka@somainline.org>,
Maksim Kiselev <bigunclemax@gmail.com>,
Bob McChesney <bob@electricworry.net>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev
Subject: Re: [PATCH v5 7/7] arm64: dts: allwinner: h616: Add thermal sensor and zones
Date: Fri, 23 Feb 2024 20:59:08 +0100 [thread overview]
Message-ID: <6017645.lOV4Wx5bFT@jernej-laptop> (raw)
In-Reply-To: <20240219153639.179814-8-andre.przywara@arm.com>
Dne ponedeljek, 19. februar 2024 ob 16:36:39 CET je Andre Przywara napisal(a):
> From: Martin Botka <martin.botka@somainline.org>
>
> There are four thermal sensors:
> - CPU
> - GPU
> - VE
> - DRAM
>
> Add the thermal sensor configuration and the thermal zones.
>
> Signed-off-by: Martin Botka <martin.botka@somainline.org>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
I can't cleanly apply patch on top of sunxi/dt-for-6.9. Can you please rebase?
Best regards,
Jernej
> ---
> .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 88 +++++++++++++++++++
> 1 file changed, 88 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> index 12ffabc79bcde..7c7d7c285505c 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
> @@ -9,6 +9,7 @@
> #include <dt-bindings/clock/sun6i-rtc.h>
> #include <dt-bindings/reset/sun50i-h616-ccu.h>
> #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
> +#include <dt-bindings/thermal/thermal.h>
>
> / {
> interrupt-parent = <&gic>;
> @@ -138,6 +139,10 @@ sid: efuse@3006000 {
> reg = <0x03006000 0x1000>;
> #address-cells = <1>;
> #size-cells = <1>;
> +
> + ths_calibration: thermal-sensor-calibration@14 {
> + reg = <0x14 0x8>;
> + };
> };
>
> watchdog: watchdog@30090a0 {
> @@ -517,6 +522,19 @@ mdio0: mdio {
> };
> };
>
> + ths: thermal-sensor@5070400 {
> + compatible = "allwinner,sun50i-h616-ths";
> + reg = <0x05070400 0x400>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_THS>;
> + clock-names = "bus";
> + resets = <&ccu RST_BUS_THS>;
> + nvmem-cells = <&ths_calibration>;
> + nvmem-cell-names = "calibration";
> + allwinner,sram = <&syscon>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> usbotg: usb@5100000 {
> compatible = "allwinner,sun50i-h616-musb",
> "allwinner,sun8i-h3-musb";
> @@ -761,4 +779,74 @@ r_rsb: rsb@7083000 {
> #size-cells = <0>;
> };
> };
> +
> + thermal-zones {
> + cpu-thermal {
> + polling-delay-passive = <500>;
> + polling-delay = <1000>;
> + thermal-sensors = <&ths 2>;
> + sustainable-power = <1000>;
> +
> + trips {
> + cpu_threshold: cpu-trip-0 {
> + temperature = <60000>;
> + type = "passive";
> + hysteresis = <0>;
> + };
> + cpu_target: cpu-trip-1 {
> + temperature = <70000>;
> + type = "passive";
> + hysteresis = <0>;
> + };
> + cpu_critical: cpu-trip-2 {
> + temperature = <110000>;
> + type = "critical";
> + hysteresis = <0>;
> + };
> + };
> + };
> +
> + gpu-thermal {
> + polling-delay-passive = <500>;
> + polling-delay = <1000>;
> + thermal-sensors = <&ths 0>;
> + sustainable-power = <1100>;
> +
> + trips {
> + gpu_temp_critical: gpu-trip-0 {
> + temperature = <110000>;
> + type = "critical";
> + hysteresis = <0>;
> + };
> + };
> + };
> +
> + ve-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&ths 1>;
> +
> + trips {
> + ve_temp_critical: ve-trip-0 {
> + temperature = <110000>;
> + type = "critical";
> + hysteresis = <0>;
> + };
> + };
> + };
> +
> + ddr-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&ths 3>;
> +
> + trips {
> + ddr_temp_critical: ddr-trip-0 {
> + temperature = <110000>;
> + type = "critical";
> + hysteresis = <0>;
> + };
> + };
> + };
> + };
> };
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-02-23 20:00 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-19 15:36 [PATCH v5 0/7] add support for H616 thermal system Andre Przywara
2024-02-19 15:36 ` [PATCH v5 1/7] soc: sunxi: sram: export register 0 for THS on H616 Andre Przywara
2024-02-22 18:26 ` Jernej Škrabec
2024-02-22 18:44 ` Daniel Lezcano
2024-02-22 19:15 ` Jernej Škrabec
2024-02-23 16:02 ` Andre Przywara
2024-02-23 17:00 ` Daniel Lezcano
2024-02-23 17:25 ` Andre Przywara
2024-02-19 15:36 ` [PATCH v5 2/7] dt-bindings: thermal: sun8i: Add H616 THS controller Andre Przywara
2024-02-19 15:36 ` [PATCH v5 3/7] thermal: sun8i: explain unknown H6 register value Andre Przywara
2024-02-19 15:36 ` [PATCH v5 4/7] thermal: sun8i: extend H6 calibration to support 4 sensors Andre Przywara
2024-02-19 15:36 ` [PATCH v5 5/7] thermal: sun8i: add SRAM register access code Andre Przywara
2024-02-19 15:36 ` [PATCH v5 6/7] thermal: sun8i: add support for H616 THS controller Andre Przywara
2024-02-19 15:36 ` [PATCH v5 7/7] arm64: dts: allwinner: h616: Add thermal sensor and zones Andre Przywara
2024-02-22 18:27 ` Jernej Škrabec
2024-02-23 19:59 ` Jernej Škrabec [this message]
2024-02-23 20:41 ` Jernej Škrabec
2024-02-21 13:42 ` [PATCH v5 0/7] add support for H616 thermal system Daniel Lezcano
2024-02-21 21:53 ` Vasily Khoruzhick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6017645.lOV4Wx5bFT@jernej-laptop \
--to=jernej.skrabec@gmail.com \
--cc=anarsoul@gmail.com \
--cc=andre.przywara@arm.com \
--cc=bigunclemax@gmail.com \
--cc=bob@electricworry.net \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=lukasz.luba@arm.com \
--cc=martin.botka@somainline.org \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=samuel@sholland.org \
--cc=tiny.windzz@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).