From: Suman Anna <s-anna@ti.com>
To: Nishanth Menon <nm@ti.com>, Rob Herring <robh+dt@kernel.org>,
Tero Kristo <t-kristo@ti.com>
Cc: devicetree@vger.kernel.org, grygorii.strashko@ti.com,
Vignesh Raghavendra <vigneshr@ti.com>,
lokeshvutla@ti.com, nsekhar@ti.com, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 6/7] arm64: dts: ti: k3-*: Use generic adc for node names
Date: Wed, 2 Sep 2020 11:51:03 -0500 [thread overview]
Message-ID: <60e6b790-360a-6eaf-03a3-5bb256adf215@ti.com> (raw)
In-Reply-To: <20200901223059.14801-7-nm@ti.com>
On 9/1/20 5:30 PM, Nishanth Menon wrote:
> Use adc@ naming for nodes following standard conventions of device
> tree (section 2.2.2 Generic Names recommendation in [1]).
>
> [1] https://github.com/devicetree-org/devicetree-specification/tree/v0.3
>
> Suggested-by: Suman Anna <s-anna@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
> arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 4 ++--
> arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 4 ++--
> 2 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
> index 51ca4b4d4c21..6dfec68ac865 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
> @@ -80,7 +80,7 @@
> #size-cells = <0>;
> };
>
> - tscadc0: tscadc@40200000 {
> + tscadc0: adc@40200000 {
OK with these changes, since these seem to be only have the adc child nodes.
This node is essentially a parent node for touchscreen and adc child nodes. The
driver is currently looking for "tsc" on touchscreen child nodes, but none of
the K3 SoCs have them atm.
regards
Suman
> compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
> reg = <0x0 0x40200000 0x0 0x1000>;
> interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
> @@ -98,7 +98,7 @@
> };
> };
>
> - tscadc1: tscadc@40210000 {
> + tscadc1: adc@40210000 {
> compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
> reg = <0x0 0x40210000 0x0 0x1000>;
> interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> index 9ad0266598ad..81801f519a61 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> @@ -211,7 +211,7 @@
> };
> };
>
> - tscadc0: tscadc@40200000 {
> + tscadc0: adc@40200000 {
> compatible = "ti,am3359-tscadc";
> reg = <0x0 0x40200000 0x0 0x1000>;
> interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
> @@ -230,7 +230,7 @@
> };
> };
>
> - tscadc1: tscadc@40210000 {
> + tscadc1: adc@40210000 {
> compatible = "ti,am3359-tscadc";
> reg = <0x0 0x40210000 0x0 0x1000>;
> interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-02 16:52 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-01 22:30 [PATCH 0/7] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings Nishanth Menon
2020-09-01 22:30 ` [PATCH 1/7] arm64: dts: ti: k3-am65*: Use generic gpio for node names Nishanth Menon
2020-09-02 4:13 ` Suman Anna
2020-09-01 22:30 ` [PATCH 2/7] arm64: dts: ti: k3-am65*: Use generic clock for serdes clock name Nishanth Menon
2020-09-02 17:45 ` Suman Anna
2020-09-02 18:21 ` Nishanth Menon
2020-09-01 22:30 ` [PATCH 3/7] arm64: dts: ti: k3-*: Use generic pinctrl for node names Nishanth Menon
2020-09-02 4:14 ` Suman Anna
2020-09-01 22:30 ` [PATCH 4/7] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Nishanth Menon
2020-09-02 4:14 ` Suman Anna
2020-09-01 22:30 ` [PATCH 5/7] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Nishanth Menon
2020-09-02 16:55 ` Suman Anna
2020-09-02 18:14 ` Nishanth Menon
2020-09-01 22:30 ` [PATCH 6/7] arm64: dts: ti: k3-*: Use generic adc for node names Nishanth Menon
2020-09-02 16:51 ` Suman Anna [this message]
2020-09-02 18:18 ` Nishanth Menon
2020-09-03 5:25 ` Vignesh Raghavendra
2020-09-03 11:23 ` Nishanth Menon
2020-09-01 22:30 ` [PATCH 7/7] arm64: dts: ti: k3-*: Fix up node_name_chars_strict errors Nishanth Menon
2020-09-02 16:54 ` Suman Anna
2020-09-02 18:16 ` Nishanth Menon
2020-09-02 3:36 ` [PATCH 0/7] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings Lokesh Vutla
2020-09-03 13:00 ` [PATCH V2 0/8] arm64: dts: ti: k3-*: Squash up node_name_chars_strict warnings + hex usage Nishanth Menon
2020-09-07 11:54 ` Nishanth Menon
2020-09-03 13:00 ` [PATCH V2 1/8] arm64: dts: ti: k3-j721e: Use lower case hexadecimal Nishanth Menon
2020-09-03 13:23 ` Suman Anna
2020-09-03 14:01 ` Lokesh Vutla
2020-09-03 13:00 ` [PATCH V2 2/8] arm64: dts: ti: k3-am65-main: " Nishanth Menon
2020-09-03 13:24 ` Suman Anna
2020-09-03 14:02 ` Lokesh Vutla
2020-09-03 13:00 ` [PATCH V2 3/8] arm64: dts: ti: k3-am65*: Use generic gpio for node names Nishanth Menon
2020-09-03 13:00 ` [PATCH V2 4/8] arm64: dts: ti: k3-am65*: Use generic clock for syscon clock names Nishanth Menon
2020-09-03 13:21 ` Vignesh Raghavendra
2020-09-03 13:00 ` [PATCH V2 5/8] arm64: dts: ti: k3-*: Use generic pinctrl for node names Nishanth Menon
2020-09-03 13:00 ` [PATCH V2 6/8] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640 Nishanth Menon
2020-09-03 13:00 ` [PATCH V2 7/8] arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name Nishanth Menon
2020-09-03 13:20 ` Vignesh Raghavendra
2020-09-03 13:00 ` [PATCH V2 8/8] arm64: dts: ti: k3-*: Fix up node_name_chars_strict warnings Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=60e6b790-360a-6eaf-03a3-5bb256adf215@ti.com \
--to=s-anna@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=grygorii.strashko@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lokeshvutla@ti.com \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox