From mboxrd@z Thu Jan 1 00:00:00 1970 From: heiko@sntech.de (Heiko =?ISO-8859-1?Q?St=FCbner?=) Date: Wed, 17 Sep 2014 00:48:16 +0200 Subject: [PATCH 1/2] ARM: dts: rockchip: fix swapped Radxa Rock pinctrl references Message-ID: <6217952.a0HdpFGHLC@diego> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The host and otg regulator pinctrl settings got swapped, making the host reference the otg pinctrl and the other way round. The actual pins are correct (gpio0-3 for host and gpio2-31 for otg). Reported-by: Naoki FUKAUMI Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3188-radxarock.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 1be0c34..c08744d 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -70,7 +70,7 @@ enable-active-high; gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; + pinctrl-0 = <&otg_vbus_drv>; regulator-name = "otg-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -93,7 +93,7 @@ enable-active-high; gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&otg_vbus_drv>; + pinctrl-0 = <&host_vbus_drv>; regulator-name = "host-pwr"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; -- 2.0.1