From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/1] mmc: sunxi: Disable irq during pm_suspend
Date: Tue, 3 Jul 2018 13:01:50 +0100 [thread overview]
Message-ID: <627d5e40-651a-062c-aac4-742727b23ddb@arm.com> (raw)
In-Reply-To: <1530602925-7714-1-git-send-email-stefan@olimex.com>
On 03/07/18 08:28, Stefan Mavrodiev wrote:
> When mmc host controller enters suspend state, the clocks are
> disabled, but irqs are not. For some reason the irqchip emmits
Not so much the irqchip, but the device itself.
> false interrupts, which causes system lock loop.
I'm not sure the interrupts are fake. They are indicative of some state
of the HW...
>
> Debug log is:
> ...
> sunxi-mmc 1c11000.mmc: setting clk to 52000000, rounded 51200000
> sunxi-mmc 1c11000.mmc: enabling the clock
> sunxi-mmc 1c11000.mmc: cmd 13(8000014d) arg 10000 ie 0x0000bbc6 len 0
> sunxi-mmc 1c11000.mmc: irq: rq (ptrval) mi 00000004 idi 00000000
> sunxi-mmc 1c11000.mmc: cmd 6(80000146) arg 3210101 ie 0x0000bbc6 len 0
> sunxi-mmc 1c11000.mmc: irq: rq (ptrval) mi 00000004 idi 00000000
> sunxi-mmc 1c11000.mmc: cmd 13(8000014d) arg 10000 ie 0x0000bbc6 len 0
> sunxi-mmc 1c11000.mmc: irq: rq (ptrval) mi 00000004 idi 00000000
> mmc1: new DDR MMC card at address 0001
> mmcblk1: mmc1:0001 AGND3R 14.6 GiB
> mmcblk1boot0: mmc1:0001 AGND3R partition 1 4.00 MiB
> mmcblk1boot1: mmc1:0001 AGND3R partition 2 4.00 MiB
> sunxi-mmc 1c11000.mmc: cmd 18(80003352) arg 0 ie 0x0000fbc2 len 409
> sunxi-mmc 1c11000.mmc: irq: rq (ptrval) mi 00004000 idi 00000002
> mmcblk1: p1
> sunxi-mmc 1c11000.mmc: irq: rq (null) mi 00000000 idi 00000000
> sunxi-mmc 1c11000.mmc: irq: rq (null) mi 00000000 idi 00000000
> sunxi-mmc 1c11000.mmc: irq: rq (null) mi 00000000 idi 00000000
> sunxi-mmc 1c11000.mmc: irq: rq (null) mi 00000000 idi 00000000
> and so on...
The clock is off, and yet the thing manages to generate interrupts. Great...
>
> This issue apears on eMMC cards, routed on MMC2 slot. The patch is
> tested with A20-OLinuXino-MICRO/LIME/LIME2 boards.
>
> Fixes: 9a8e1e8cc2c0 ("mmc: sunxi: Add runtime_pm support")
> Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
> ---
> drivers/mmc/host/sunxi-mmc.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
> index e747259..acae7a8 100644
> --- a/drivers/mmc/host/sunxi-mmc.c
> +++ b/drivers/mmc/host/sunxi-mmc.c
> @@ -1446,6 +1446,7 @@ static int sunxi_mmc_runtime_resume(struct device *dev)
> sunxi_mmc_init_host(host);
> sunxi_mmc_set_bus_width(host, mmc->ios.bus_width);
> sunxi_mmc_set_clk(host, &mmc->ios);
> + enable_irq(host->irq);
>
> return 0;
> }
> @@ -1455,6 +1456,7 @@ static int sunxi_mmc_runtime_suspend(struct device *dev)
> struct mmc_host *mmc = dev_get_drvdata(dev);
> struct sunxi_mmc_host *host = mmc_priv(mmc);
>
> + disable_irq(host->irq);
> sunxi_mmc_reset_host(host);
> sunxi_mmc_disable(host);
>
>
For the record, this patch fixes the boot issues I've observed on my
cubietruck.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
M.
--
Jazz is not dead. It just smells funny...
next prev parent reply other threads:[~2018-07-03 12:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-03 7:28 [PATCH 1/1] mmc: sunxi: Disable irq during pm_suspend Stefan Mavrodiev
2018-07-03 12:01 ` Marc Zyngier [this message]
2018-07-03 14:54 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=627d5e40-651a-062c-aac4-742727b23ddb@arm.com \
--to=marc.zyngier@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox