[PATCH V2 1/5] iommu/msm: Add DT adaptation

[laurent.pinchart@ideasonboard.com (Laurent Pinchart)]

Hi Sricharan,

Thank you for the patch.

On Wednesday 06 Apr 2016 19:59:31 Sricharan R wrote:
> The driver currently works based on platform data. Remove this
> and add support for DT. A single master can have multiple ports
> connected to more than one iommu.
> 
>                      master
>                        |
>                        |
>                        |
>           ------------------------
>           |                      |
>        IOMMU0                  IOMMU1
>           |                      |
>      ctx0   ctx1            ctx0   ctx1
> 
> This association of master and iommus/contexts were previously
> represented by platform data parent/child device details. The client
> drivers were responsible for programming all of the iommus/contexts
> for the device. Now while adapting to generic DT bindings we maintain the
> list of iommus, contexts that each master domain is connected to and
> program all of them on attach/detach.
> 
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> ---
>  .../devicetree/bindings/iommu/msm,iommu-v0.txt     |  59 ++++
>  drivers/iommu/msm_iommu.c                          | 252 +++++++++--------
>  drivers/iommu/msm_iommu.h                          |  73 ++---
>  drivers/iommu/msm_iommu_dev.c                      | 315 ++++--------------
>  4 files changed, 296 insertions(+), 403 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
> 
> diff --git a/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
> b/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt new file mode
> 100644
> index 0000000..21bfbfc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
> @@ -0,0 +1,59 @@
> +* QCOM IOMMU
> +
> +The QCOM IOMMU is an implementation compatible with the ARM VMSA short
> +descriptor page tables. It provides address translation for bus masters
> outside
> +of the CPU, each connected to the IOMMU through a port called micro-TLB.
> +
> +Required Properties:
> +
> +  - compatible: Must contain "qcom,iommu-v0".
> +  - reg: Base address and size of the IOMMU registers.
> +  - interrupts: Specifiers for the MMU fault interrupts. For instances that
> +    support secure mode two interrupts must be specified, for non-secure
> and
> +    secure mode, in that order. For instances that don't support secure
> mode a
> +    single interrupt must be specified.
> +  - #iommu-cells: This is the total number of stream ids that a master
> would
> +		  use during transactions which will be specified as a list
> +		  as a part of iommus property below.

That's not correct. #iommu-cells, as defined in the core IOMMU DT bindings, is 
"the number of cells in an IOMMU specifier needed to encode an address" 
(address being a stream id here).

Can the number of cells differ from instance to instance, or is it always 2 ?

> +  - ncb: The total number of context banks in the IOMMU.

Should this be qcom,ncb ?

> +  - clocks	: List of clocks to be used during SMMU register access. See
> +		  Documentation/devicetree/bindings/clock/clock-bindings.txt
> +		  for information about the format. For each clock specified
> +		  here, there must be a corresponding entry in clock-names
> +		  (see below).
> +
> +  - clock-names	: List of clock names corresponding to the clocks specified
> in
> +		  the "clocks" property (above). See
> +		  Documentation/devicetree/bindings/clock/clock-bindings.txt
> +		  for more info.
> +
> +Each bus master connected to an IOMMU must reference the IOMMU in its
> device
> +node with the following property:
> +
> +  - iommus: A reference to the IOMMU in multiple cells. The first cell is a
> +	    phandle to the IOMMU and the second cell is the list of the
> +	    stream ids used by the device.

You mention in your cover letter that a master device can be connected to 
multiple iommus, shouldn't that be stated here ? On the same topic, do your 
masters need to selectively enable/disable memory ports to IOMMUs, or can they 
all be enabled/disabled together ?

Also, the second cell can't be a list of stream ids, as one cell stores one 
value. A master device using multiple stream ids should use multiple entries 
in the iommus property.

> +Example: mdp iommu and its bus master
> +
> +                mdp_port0: qcom,iommu at 7500000 {

I think you can use iommu instead of qcom,iommu.

> +			compatible = "msm,iommu-v0";
> +			#iommu-cells = <2>;
> +			clock-names =
> +			    "smmu_pclk",
> +			    "iommu_clk";
> +			clocks =
> +			    <&mmcc SMMU_AHB_CLK>,
> +			    <&mmcc MDP_AXI_CLK>;
> +			reg = <0x07500000 0x100000>;
> +			interrupts =
> +			    <GIC_SPI 63 0>,
> +			    <GIC_SPI 64 0>;
> +			ncb = <2>;
> +		};
> +
> +		mdp: qcom,mdp at 5100000 {
> +			compatible = "qcom,mdp";
> +			...
> +			iommus = <&mdp_port0 0 2>;
> +		};

-- 
Regards,

Laurent Pinchart