Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: Alex Elder <elder@riscstar.com>,
	andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
	kuba@kernel.org, pabeni@redhat.com
Cc: mcoquelin.stm32@gmail.com, alexandre.torgue@foss.st.com,
	linux-stm32@st-md-mailman.stormreply.com, netdev@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Sashiko <sashiko-bot@kernel.org>
Subject: Re: [PATCH] net: stmmac: use dma_addr_t for DMA addresses
Date: Wed, 12 Aug 2026 09:23:19 +0200	[thread overview]
Message-ID: <65494f6d-50fe-4bdb-98d9-7150d9a4fc91@bootlin.com> (raw)
In-Reply-To: <20260811192703.1765416-1-elder@riscstar.com>

Hi Alex,

On 8/11/26 21:27, Alex Elder wrote:
> In jumbo_frm() (implemented in both "chain_mode.c" and "ring_mode.c"),
> an unsigned integer local variable is used to hold the value returned
> by dma_map_single().  On systems where a dma_addr_t is 64 bits, the
> subsequent dma_mapping_error() check of the returned value operates
> only on the low 32 bits (whose high bit won't be sign-extended).  In
> this case, dma_mapping_error() would return 0 (no error) even if there
> were one.
> 
> Fix this in both spots by using a dma_addr_t for the local variable.

Thanks :)

I was wondering if it would silently hides another address size related
issue a little bit lower, as we now have :

  dma_addr_t des2;

  des2 = dma_map_single(...);

  desc->des2 = cpu_to_le32(des2);

desc->des2 is __le32, so for 64 bit addresses we silently truncate the
address.

However I don't see how jumbo would work on 64-bits anyways as des3 is the next
chunk of the jumbo frame...

I think this is good as-is, so

Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>

Maxime

> 
> Reported-by: Sashiko <sashiko-bot@kernel.org>
> Link: https://lore.kernel.org/linux-devicetree/20260606010122.21A211F00899@smtp.kernel.org/
> Signed-off-by: Alex Elder <elder@riscstar.com>
> ---
>  drivers/net/ethernet/stmicro/stmmac/chain_mode.c | 3 ++-
>  drivers/net/ethernet/stmicro/stmmac/ring_mode.c  | 3 ++-
>  2 files changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/chain_mode.c b/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
> index fc04a23342cfc..ec25193d287bb 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
> @@ -20,9 +20,10 @@ static int jumbo_frm(struct stmmac_tx_queue *tx_q, struct sk_buff *skb,
>  	unsigned int nopaged_len = skb_headlen(skb);
>  	struct stmmac_priv *priv = tx_q->priv_data;
>  	unsigned int entry = tx_q->cur_tx;
> -	unsigned int bmax, buf_len, des2;
> +	unsigned int bmax, buf_len;
>  	unsigned int i = 1, len;
>  	struct dma_desc *desc;
> +	dma_addr_t des2;
>  
>  	desc = tx_q->dma_tx + entry;
>  
> diff --git a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
> index 78fc6aa5bbe95..664d8cfb58cdc 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
> @@ -20,8 +20,9 @@ static int jumbo_frm(struct stmmac_tx_queue *tx_q, struct sk_buff *skb,
>  	unsigned int nopaged_len = skb_headlen(skb);
>  	struct stmmac_priv *priv = tx_q->priv_data;
>  	unsigned int entry = tx_q->cur_tx;
> -	unsigned int bmax, len, des2;
> +	unsigned int bmax, len;
>  	struct dma_desc *desc;
> +	dma_addr_t des2;
>  
>  	if (priv->extend_desc)
>  		desc = (struct dma_desc *)(tx_q->dma_etx + entry);
> 
> base-commit: 31397cf1819210bd63fa3d2c7d8c24f7c8667d99



  reply	other threads:[~2026-08-12  7:23 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-11 19:27 [PATCH] net: stmmac: use dma_addr_t for DMA addresses Alex Elder
2026-08-12  7:23 ` Maxime Chevallier [this message]
2026-08-12 12:25   ` Alex Elder
2026-08-12 12:33     ` Maxime Chevallier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=65494f6d-50fe-4bdb-98d9-7150d9a4fc91@bootlin.com \
    --to=maxime.chevallier@bootlin.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=elder@riscstar.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=sashiko-bot@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox