[PATCH v3 0/3] arm64: dts: hi3798cv200: fix GICR size, add cache info, maintenance irq and GICH, GICV spaces

[PATCH v3 0/3] arm64: dts: hi3798cv200: fix GICR size, add cache info, maintenance irq and GICH, GICV spaces

[Yang Xiwen via B4 Relay]

The patchset fixes some warnings reported by the kernel during boot.

The cache size info is from Processor_Datasheet_v2XX.pdf [1], Section
2.2.1 Master Processor.

The cache line size and the set-associative info are from Cortex-A53
Documentation [2].

From the doc, it can be concluded that L1 i-cache is 4-way assoc, L1
d-cache is 2-way assoc and L2 cache is 16-way assoc. Calculate the dts
props accordingly.

Also, to use KVM's VGIC code, GICH, GICV registers spaces and maintenance
IRQ are added to the dts with verification.

[1]: https://github.com/96boards/documentation/blob/master/enterprise/poplar/hardware-docs/Processor_Datasheet_v2XX.pdf
[2]: https://developer.arm.com/documentation/ddi0500/j/Level-1-Memory-System

Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
---
Changes in v3:
- send patches to stable (Andrew Lunn)
- rewrite the commit logs more formally (Andrew Lunn)
- rename l2-cache0 to l2-cache (Krzysztof Kozlowski)
- Link to v2: https://lore.kernel.org/r/20240218-cache-v2-0-1fd919e2bd3e@outlook.com

Changes in v2:
- arm64: dts: hi3798cv200: add GICH, GICV register spces and
  maintainance IRQ.
- Link to v1: https://lore.kernel.org/r/20240218-cache-v1-0-2c0a8a4472e7@outlook.com

---
Yang Xiwen (3):
      arm64: dts: hi3798cv200: fix the size of GICR
      arm64: dts: hi3798cv200: add GICH, GICV register space and irq
      arm64: dts: hi3798cv200: add cache info

 arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 43 +++++++++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)
---
base-commit: 8d3dea210042f54b952b481838c1e7dfc4ec751d
change-id: 20240218-cache-11c8bf7566c2

Best regards,
-- 
Yang Xiwen <forbidden405@outlook.com>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 1/3] arm64: dts: hi3798cv200: fix the size of GICR

[Yang Xiwen via B4 Relay]

From: Yang Xiwen <forbidden405@outlook.com>

During boot, Linux kernel complains:

[    0.000000] GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set

This SoC is using a regular GIC-400 and the GICR space size should be
8KB rather than 256B.

With this patch:

[    0.000000] GIC: Using split EOI/Deactivate mode

So this should be the correct fix.

Fixes: 2f20182ed670 ("arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board")
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Cc: stable@vger.kernel.org
---
 arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
index ed1b5a7a6067..d01023401d7e 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -58,7 +58,7 @@ cpu@3 {
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		reg = <0x0 0xf1001000 0x0 0x1000>,  /* GICD */
-		      <0x0 0xf1002000 0x0 0x100>;   /* GICC */
+		      <0x0 0xf1002000 0x0 0x2000>;  /* GICC */
 		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;

-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 2/3] arm64: dts: hi3798cv200: add GICH, GICV register space and irq

[Yang Xiwen via B4 Relay]

From: Yang Xiwen <forbidden405@outlook.com>

This is needed by KVM to make use of VGIC code. Just like regular
GIC-400, PPI #9 is the hypervisor maintenance interrupt. It has been
verified.

Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
---
 arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
index d01023401d7e..fc64d2fa99eb 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -58,7 +58,11 @@ cpu@3 {
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		reg = <0x0 0xf1001000 0x0 0x1000>,  /* GICD */
-		      <0x0 0xf1002000 0x0 0x2000>;  /* GICC */
+		      <0x0 0xf1002000 0x0 0x2000>,  /* GICC */
+		      <0x0 0xf1004000 0x0 0x2000>,  /* GICH */
+		      <0x0 0xf1006000 0x0 0x2000>;  /* GICV */
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_HIGH)>;
 		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;

-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 3/3] arm64: dts: hi3798cv200: add cache info

[Yang Xiwen via B4 Relay]

From: Yang Xiwen <forbidden405@outlook.com>

During boot, the kernel complains:

[    0.044029] cacheinfo: Unable to detect cache hierarchy for CPU 0

So add L1/L2 cache info to the dts according to the datasheet. (32KiB L1
i-cache + 32 KiB L1 d-cache + 512 KiB L2 unified cache)

With this patch, the line above is gone and the following info is added
to the output of `lscpu`:

Caches (sum of all):
  L1d:                   128 KiB (4 instances)
  L1i:                   128 KiB (4 instances)
  L2:                    512 KiB (1 instance)

Fixes: 2f20182ed670 ("arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board")
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Cc: stable@vger.kernel.org
---
 arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 37 ++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
index fc64d2fa99eb..f6bc001c3832 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -31,6 +31,13 @@ cpu@0 {
 			device_type = "cpu";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-size = <0x8000>; /* 32 KiB */
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>; /* 32 KiB */
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu@1 {
@@ -38,6 +45,13 @@ cpu@1 {
 			device_type = "cpu";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-size = <0x8000>; /* 32 KiB */
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>; /* 32 KiB */
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu@2 {
@@ -45,6 +59,13 @@ cpu@2 {
 			device_type = "cpu";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-size = <0x8000>; /* 32 KiB */
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>; /* 32 KiB */
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu@3 {
@@ -52,9 +73,25 @@ cpu@3 {
 			device_type = "cpu";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-size = <0x8000>; /* 32 KiB */
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>; /* 32 KiB */
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&L2>;
 		};
 	};
 
+	L2: l2-cache {
+		compatible = "cache";
+		cache-unified;
+		cache-size = <0x80000>; /* 512 KiB */
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		cache-level = <2>;
+	};
+
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		reg = <0x0 0xf1001000 0x0 0x1000>,  /* GICD */

-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 0/3] arm64: dts: hi3798cv200: fix GICR size, add cache info, maintenance irq and GICH, GICV spaces

[Yang Xiwen]

On 2/19/2024 11:05 PM, Yang Xiwen via B4 Relay wrote:
> The patchset fixes some warnings reported by the kernel during boot.
>
> The cache size info is from Processor_Datasheet_v2XX.pdf [1], Section
> 2.2.1 Master Processor.
>
> The cache line size and the set-associative info are from Cortex-A53
> Documentation [2].
>
>  From the doc, it can be concluded that L1 i-cache is 4-way assoc, L1
> d-cache is 2-way assoc and L2 cache is 16-way assoc. Calculate the dts
> props accordingly.
>
> Also, to use KVM's VGIC code, GICH, GICV registers spaces and maintenance
> IRQ are added to the dts with verification.
>
> [1]: https://github.com/96boards/documentation/blob/master/enterprise/poplar/hardware-docs/Processor_Datasheet_v2XX.pdf
> [2]: https://developer.arm.com/documentation/ddi0500/j/Level-1-Memory-System
>
> Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
> ---
> Changes in v3:
> - send patches to stable (Andrew Lunn)
> - rewrite the commit logs more formally (Andrew Lunn)
> - rename l2-cache0 to l2-cache (Krzysztof Kozlowski)
> - Link to v2: https://lore.kernel.org/r/20240218-cache-v2-0-1fd919e2bd3e@outlook.com
>
> Changes in v2:
> - arm64: dts: hi3798cv200: add GICH, GICV register spces and
>    maintainance IRQ.
> - Link to v1: https://lore.kernel.org/r/20240218-cache-v1-0-2c0a8a4472e7@outlook.com
>
> ---
> Yang Xiwen (3):
>        arm64: dts: hi3798cv200: fix the size of GICR
>        arm64: dts: hi3798cv200: add GICH, GICV register space and irq
>        arm64: dts: hi3798cv200: add cache info
>
>   arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 43 +++++++++++++++++++++++++-
>   1 file changed, 42 insertions(+), 1 deletion(-)
> ---
> base-commit: 8d3dea210042f54b952b481838c1e7dfc4ec751d
> change-id: 20240218-cache-11c8bf7566c2
>
> Best regards,

May someone apply this patchset to their tree so that it can land in 
stable at the end? This is a fix, not adding new functionalities. It's 
been 2 weeks already.

-- 
Regards,
Yang Xiwen


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 0/3] arm64: dts: hi3798cv200: fix GICR size, add cache info, maintenance irq and GICH, GICV spaces

[Wei Xu]

Hi Yang,

On 2024/3/12 19:19, Yang Xiwen wrote:
> On 2/19/2024 11:05 PM, Yang Xiwen via B4 Relay wrote:
>> The patchset fixes some warnings reported by the kernel during boot.
>>
>> The cache size info is from Processor_Datasheet_v2XX.pdf [1], Section
>> 2.2.1 Master Processor.
>>
>> The cache line size and the set-associative info are from Cortex-A53
>> Documentation [2].
>>
>>  From the doc, it can be concluded that L1 i-cache is 4-way assoc, L1
>> d-cache is 2-way assoc and L2 cache is 16-way assoc. Calculate the dts
>> props accordingly.
>>
>> Also, to use KVM's VGIC code, GICH, GICV registers spaces and maintenance
>> IRQ are added to the dts with verification.
>>
>> [1]: https://github.com/96boards/documentation/blob/master/enterprise/poplar/hardware-docs/Processor_Datasheet_v2XX.pdf
>> [2]: https://developer.arm.com/documentation/ddi0500/j/Level-1-Memory-System
>>
>> Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
>> ---
>> Changes in v3:
>> - send patches to stable (Andrew Lunn)
>> - rewrite the commit logs more formally (Andrew Lunn)
>> - rename l2-cache0 to l2-cache (Krzysztof Kozlowski)
>> - Link to v2: https://lore.kernel.org/r/20240218-cache-v2-0-1fd919e2bd3e@outlook.com
>>
>> Changes in v2:
>> - arm64: dts: hi3798cv200: add GICH, GICV register spces and
>>    maintainance IRQ.
>> - Link to v1: https://lore.kernel.org/r/20240218-cache-v1-0-2c0a8a4472e7@outlook.com
>>
>> ---
>> Yang Xiwen (3):
>>        arm64: dts: hi3798cv200: fix the size of GICR
>>        arm64: dts: hi3798cv200: add GICH, GICV register space and irq
>>        arm64: dts: hi3798cv200: add cache info
>>
>>   arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 43 +++++++++++++++++++++++++-
>>   1 file changed, 42 insertions(+), 1 deletion(-)
>> ---
>> base-commit: 8d3dea210042f54b952b481838c1e7dfc4ec751d
>> change-id: 20240218-cache-11c8bf7566c2
>>
>> Best regards,
> 
> May someone apply this patchset to their tree so that it can land in stable at the end? This is a fix, not adding new functionalities. It's been 2 weeks already.
> 

Sorry for the delay, I am too busy to catch up with this cycle.
I will go through this patch set and maybe apply it during the next cycle.

Best Regards,
Wei

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 0/3] arm64: dts: hi3798cv200: fix GICR size, add cache info, maintenance irq and GICH, GICV spaces

[Yang Xiwen]

On 3/12/2024 7:33 PM, Wei Xu wrote:
> Hi Yang,
>
> On 2024/3/12 19:19, Yang Xiwen wrote:
>> On 2/19/2024 11:05 PM, Yang Xiwen via B4 Relay wrote:
>>> The patchset fixes some warnings reported by the kernel during boot.
>>>
>>> The cache size info is from Processor_Datasheet_v2XX.pdf [1], Section
>>> 2.2.1 Master Processor.
>>>
>>> The cache line size and the set-associative info are from Cortex-A53
>>> Documentation [2].
>>>
>>>   From the doc, it can be concluded that L1 i-cache is 4-way assoc, L1
>>> d-cache is 2-way assoc and L2 cache is 16-way assoc. Calculate the dts
>>> props accordingly.
>>>
>>> Also, to use KVM's VGIC code, GICH, GICV registers spaces and maintenance
>>> IRQ are added to the dts with verification.
>>>
>>> [1]: https://github.com/96boards/documentation/blob/master/enterprise/poplar/hardware-docs/Processor_Datasheet_v2XX.pdf
>>> [2]: https://developer.arm.com/documentation/ddi0500/j/Level-1-Memory-System
>>>
>>> Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
>>> ---
>>> Changes in v3:
>>> - send patches to stable (Andrew Lunn)
>>> - rewrite the commit logs more formally (Andrew Lunn)
>>> - rename l2-cache0 to l2-cache (Krzysztof Kozlowski)
>>> - Link to v2: https://lore.kernel.org/r/20240218-cache-v2-0-1fd919e2bd3e@outlook.com
>>>
>>> Changes in v2:
>>> - arm64: dts: hi3798cv200: add GICH, GICV register spces and
>>>     maintainance IRQ.
>>> - Link to v1: https://lore.kernel.org/r/20240218-cache-v1-0-2c0a8a4472e7@outlook.com
>>>
>>> ---
>>> Yang Xiwen (3):
>>>         arm64: dts: hi3798cv200: fix the size of GICR
>>>         arm64: dts: hi3798cv200: add GICH, GICV register space and irq
>>>         arm64: dts: hi3798cv200: add cache info
>>>
>>>    arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 43 +++++++++++++++++++++++++-
>>>    1 file changed, 42 insertions(+), 1 deletion(-)
>>> ---
>>> base-commit: 8d3dea210042f54b952b481838c1e7dfc4ec751d
>>> change-id: 20240218-cache-11c8bf7566c2
>>>
>>> Best regards,
>> May someone apply this patchset to their tree so that it can land in stable at the end? This is a fix, not adding new functionalities. It's been 2 weeks already.
>>
> Sorry for the delay, I am too busy to catch up with this cycle.
> I will go through this patch set and maybe apply it during the next cycle.


No problem. I'm just a bit worried if this patch is getting lost. It's 
good to know it's still maintained. Because i've seen some maintainers 
not reviewing any patches for over 1 year already, with their names and 
emails still in MAINTAINERS.


By the way, I think fixes and new features are in different cycles? Most 
maintainers seem to have multiple branches to handle this.


>
> Best Regards,
> Wei


-- 
Regards,
Yang Xiwen


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 0/3] arm64: dts: hi3798cv200: fix GICR size, add cache info, maintenance irq and GICH, GICV spaces

[Wei Xu]

Hi Yang,

On 2024/3/12 19:46, Yang Xiwen wrote:
> On 3/12/2024 7:33 PM, Wei Xu wrote:
>> Hi Yang,
>>
>> On 2024/3/12 19:19, Yang Xiwen wrote:
>>> On 2/19/2024 11:05 PM, Yang Xiwen via B4 Relay wrote:
>>>> The patchset fixes some warnings reported by the kernel during boot.
>>>>
>>>> The cache size info is from Processor_Datasheet_v2XX.pdf [1], Section
>>>> 2.2.1 Master Processor.
>>>>
>>>> The cache line size and the set-associative info are from Cortex-A53
>>>> Documentation [2].
>>>>
>>>>   From the doc, it can be concluded that L1 i-cache is 4-way assoc, L1
>>>> d-cache is 2-way assoc and L2 cache is 16-way assoc. Calculate the dts
>>>> props accordingly.
>>>>
>>>> Also, to use KVM's VGIC code, GICH, GICV registers spaces and maintenance
>>>> IRQ are added to the dts with verification.
>>>>
>>>> [1]: https://github.com/96boards/documentation/blob/master/enterprise/poplar/hardware-docs/Processor_Datasheet_v2XX.pdf
>>>> [2]: https://developer.arm.com/documentation/ddi0500/j/Level-1-Memory-System
>>>>
>>>> Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
>>>> ---
>>>> Changes in v3:
>>>> - send patches to stable (Andrew Lunn)
>>>> - rewrite the commit logs more formally (Andrew Lunn)
>>>> - rename l2-cache0 to l2-cache (Krzysztof Kozlowski)
>>>> - Link to v2: https://lore.kernel.org/r/20240218-cache-v2-0-1fd919e2bd3e@outlook.com
>>>>
>>>> Changes in v2:
>>>> - arm64: dts: hi3798cv200: add GICH, GICV register spces and
>>>>     maintainance IRQ.
>>>> - Link to v1: https://lore.kernel.org/r/20240218-cache-v1-0-2c0a8a4472e7@outlook.com
>>>>
>>>> ---
>>>> Yang Xiwen (3):
>>>>         arm64: dts: hi3798cv200: fix the size of GICR
>>>>         arm64: dts: hi3798cv200: add GICH, GICV register space and irq
>>>>         arm64: dts: hi3798cv200: add cache info
>>>>
>>>>    arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 43 +++++++++++++++++++++++++-
>>>>    1 file changed, 42 insertions(+), 1 deletion(-)
>>>> ---
>>>> base-commit: 8d3dea210042f54b952b481838c1e7dfc4ec751d
>>>> change-id: 20240218-cache-11c8bf7566c2
>>>>
>>>> Best regards,
>>> May someone apply this patchset to their tree so that it can land in stable at the end? This is a fix, not adding new functionalities. It's been 2 weeks already.
>>>
>> Sorry for the delay, I am too busy to catch up with this cycle.
>> I will go through this patch set and maybe apply it during the next cycle.
> 
> 
> No problem. I'm just a bit worried if this patch is getting lost. It's good to know it's still maintained. Because i've seen some maintainers not reviewing any patches for over 1 year already, with their names and emails still in MAINTAINERS.

Thanks for the understanding!

> 
> 
> By the way, I think fixes and new features are in different cycles? Most maintainers seem to have multiple branches to handle this.

Yes, they can be in different cycle. But now is the merge window.

Best Regards,
Wei

> 
> 
>>
>> Best Regards,
>> Wei
> 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 0/3] arm64: dts: hi3798cv200: fix GICR size, add cache info, maintenance irq and GICH, GICV spaces

[Krzysztof Kozlowski]

On 12/03/2024 12:19, Yang Xiwen wrote:
>> Yang Xiwen (3):
>>        arm64: dts: hi3798cv200: fix the size of GICR
>>        arm64: dts: hi3798cv200: add GICH, GICV register space and irq
>>        arm64: dts: hi3798cv200: add cache info
>>
>>   arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 43 +++++++++++++++++++++++++-
>>   1 file changed, 42 insertions(+), 1 deletion(-)
>> ---
>> base-commit: 8d3dea210042f54b952b481838c1e7dfc4ec751d
>> change-id: 20240218-cache-11c8bf7566c2
>>
>> Best regards,
> 
> May someone apply this patchset to their tree so that it can land in 
> stable at the end? This is a fix, not adding new functionalities. It's 
> been 2 weeks already.

It's merge window, what do you expect to happen now? Please observe the
process timelines.

For arm-soc usually the cut-off is around rc6. When did you send it?
Week before rc6, so a bit late.

Anyway, I bookmarked this patchset, so if no one applies within some
time after merge window, I'll take it.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 0/3] arm64: dts: hi3798cv200: fix GICR size, add cache info, maintenance irq and GICH, GICV spaces

[Wei Xu]

Hi Krzysztof,

On 2024/3/12 19:36, Krzysztof Kozlowski wrote:
> On 12/03/2024 12:19, Yang Xiwen wrote:
>>> Yang Xiwen (3):
>>>        arm64: dts: hi3798cv200: fix the size of GICR
>>>        arm64: dts: hi3798cv200: add GICH, GICV register space and irq
>>>        arm64: dts: hi3798cv200: add cache info
>>>
>>>   arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 43 +++++++++++++++++++++++++-
>>>   1 file changed, 42 insertions(+), 1 deletion(-)
>>> ---
>>> base-commit: 8d3dea210042f54b952b481838c1e7dfc4ec751d
>>> change-id: 20240218-cache-11c8bf7566c2
>>>
>>> Best regards,
>>
>> May someone apply this patchset to their tree so that it can land in 
>> stable at the end? This is a fix, not adding new functionalities. It's 
>> been 2 weeks already.
> 
> It's merge window, what do you expect to happen now? Please observe the
> process timelines.
> 
> For arm-soc usually the cut-off is around rc6. When did you send it?
> Week before rc6, so a bit late.
> 
> Anyway, I bookmarked this patchset, so if no one applies within some
> time after merge window, I'll take it.

Thanks for your explanation and kindness!

Best Regards,
Wei

> 
> Best regards,
> Krzysztof
> 
> .
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 0/3] arm64: dts: hi3798cv200: fix GICR size, add cache info, maintenance irq and GICH, GICV spaces

[Krzysztof Kozlowski]

On Mon, 19 Feb 2024 23:05:25 +0800, Yang Xiwen wrote:
> The patchset fixes some warnings reported by the kernel during boot.
> 
> The cache size info is from Processor_Datasheet_v2XX.pdf [1], Section
> 2.2.1 Master Processor.
> 
> The cache line size and the set-associative info are from Cortex-A53
> Documentation [2].
> 
> [...]

It's rc3 and almost one month after last ping/talk, so apparently these got
lost. I'll take them, but let me know if this should go via different tree.


Applied, thanks!

[1/3] arm64: dts: hi3798cv200: fix the size of GICR
      https://git.kernel.org/krzk/linux-dt/c/428a575dc9038846ad259466d5ba109858c0a023
[2/3] arm64: dts: hi3798cv200: add GICH, GICV register space and irq
      https://git.kernel.org/krzk/linux-dt/c/f00a6b9644a5668e25ad9ca5aff53b6de4b0aaf6
[3/3] arm64: dts: hi3798cv200: add cache info
      https://git.kernel.org/krzk/linux-dt/c/c7a3ad884d1dc1302dcc3295baa18917180b8bec

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 0/3] arm64: dts: hi3798cv200: fix GICR size, add cache info, maintenance irq and GICH, GICV spaces

[Wei Xu]

Hi Krzysztof,

On 2024/4/8 15:31, Krzysztof Kozlowski wrote:
> 
> On Mon, 19 Feb 2024 23:05:25 +0800, Yang Xiwen wrote:
>> The patchset fixes some warnings reported by the kernel during boot.
>>
>> The cache size info is from Processor_Datasheet_v2XX.pdf [1], Section
>> 2.2.1 Master Processor.
>>
>> The cache line size and the set-associative info are from Cortex-A53
>> Documentation [2].
>>
>> [...]
> 
> It's rc3 and almost one month after last ping/talk, so apparently these got
> lost. I'll take them, but let me know if this should go via different tree.
> 
> 
> Applied, thanks!

Thanks!
Fine to me.

Best Regards,
Wei

> 
> [1/3] arm64: dts: hi3798cv200: fix the size of GICR
>       https://git.kernel.org/krzk/linux-dt/c/428a575dc9038846ad259466d5ba109858c0a023
> [2/3] arm64: dts: hi3798cv200: add GICH, GICV register space and irq
>       https://git.kernel.org/krzk/linux-dt/c/f00a6b9644a5668e25ad9ca5aff53b6de4b0aaf6
> [3/3] arm64: dts: hi3798cv200: add cache info
>       https://git.kernel.org/krzk/linux-dt/c/c7a3ad884d1dc1302dcc3295baa18917180b8bec
> 
> Best regards,
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 0/3] arm64: dts: hi3798cv200: fix GICR size, add cache info, maintenance irq and GICH, GICV spaces

[Yang Xiwen]

On 4/8/2024 3:31 PM, Krzysztof Kozlowski wrote:
> On Mon, 19 Feb 2024 23:05:25 +0800, Yang Xiwen wrote:
>> The patchset fixes some warnings reported by the kernel during boot.
>>
>> The cache size info is from Processor_Datasheet_v2XX.pdf [1], Section
>> 2.2.1 Master Processor.
>>
>> The cache line size and the set-associative info are from Cortex-A53
>> Documentation [2].
>>
>> [...]
> It's rc3 and almost one month after last ping/talk, so apparently these got
> lost. I'll take them, but let me know if this should go via different tree.


Thanks a lot. From my experience, i think this should go via HiSilicon's 
tree first(which stalls now), then go to SOC tree 
(git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git), finally in 
torvald's tree. This was the case for some qcom dts changes about 1yr ago.


>
>
> Applied, thanks!
>
> [1/3] arm64: dts: hi3798cv200: fix the size of GICR
>        https://git.kernel.org/krzk/linux-dt/c/428a575dc9038846ad259466d5ba109858c0a023
> [2/3] arm64: dts: hi3798cv200: add GICH, GICV register space and irq
>        https://git.kernel.org/krzk/linux-dt/c/f00a6b9644a5668e25ad9ca5aff53b6de4b0aaf6
> [3/3] arm64: dts: hi3798cv200: add cache info
>        https://git.kernel.org/krzk/linux-dt/c/c7a3ad884d1dc1302dcc3295baa18917180b8bec
>
> Best regards,


-- 
Regards,
Yang Xiwen


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel