From mboxrd@z Thu Jan 1 00:00:00 1970 From: t-kristo@ti.com (Tero Kristo) Date: Thu, 31 May 2018 16:29:56 +0300 Subject: [PATCH v2 3/6] clk: ti: dra7: Add clkctrl clock data for the mcan clocks In-Reply-To: References: <20180530141133.3711-1-faiz_abbas@ti.com> <20180530141133.3711-4-faiz_abbas@ti.com> <20180531040350.GA25132@rob-hp-laptop> Message-ID: <678ef467-a235-91db-8bae-f249ad98eac8@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 31/05/18 13:14, Faiz Abbas wrote: > Hi, > > On Thursday 31 May 2018 09:33 AM, Rob Herring wrote: >> On Wed, May 30, 2018 at 07:41:30PM +0530, Faiz Abbas wrote: >>> Add clkctrl data for the m_can clocks and register it within the > ... >>> >>> diff --git a/include/dt-bindings/clock/dra7.h b/include/dt-bindings/clock/dra7.h >>> index 5e1061b15aed..d7549c57cac3 100644 >>> --- a/include/dt-bindings/clock/dra7.h >>> +++ b/include/dt-bindings/clock/dra7.h >>> @@ -168,5 +168,6 @@ >>> #define DRA7_COUNTER_32K_CLKCTRL DRA7_CLKCTRL_INDEX(0x50) >>> #define DRA7_UART10_CLKCTRL DRA7_CLKCTRL_INDEX(0x80) >>> #define DRA7_DCAN1_CLKCTRL DRA7_CLKCTRL_INDEX(0x88) >>> +#define DRA7_ADC_CLKCTRL DRA7_CLKCTRL_INDEX(0xa0) >> >> ADC and mcan are the same thing? >> > > The register to control MCAN clocks is called ADC_CLKCTRL, Yes. Is there any reason for this or is that just a documentation bug? -Tero -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki