From mboxrd@z Thu Jan 1 00:00:00 1970 From: absahu@codeaurora.org (Abhishek Sahu) Date: Sat, 03 Feb 2018 17:00:30 +0530 Subject: [PATCH 07/15] ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file In-Reply-To: <1517202689-14212-8-git-send-email-sricharan@codeaurora.org> References: <1517202689-14212-1-git-send-email-sricharan@codeaurora.org> <1517202689-14212-8-git-send-email-sricharan@codeaurora.org> Message-ID: <6821d93c282c8337b2a58c5c9337a008@codeaurora.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 2018-01-29 10:41, Sricharan R wrote: > Signed-off-by: Sricharan R > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts | 8 ++++++++ > 2 files changed, 9 insertions(+) > create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 21ed56d..1a8ab050 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -725,6 +725,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ > qcom-apq8084-mtp.dtb \ > qcom-ipq4019-ap.dk01.1-c1.dtb \ > qcom-ipq4019-ap.dk01.1-c2.dtb \ > + qcom-ipq4019-ap.dk04.1-c1.dtb \ > qcom-ipq8064-ap148.dtb \ > qcom-msm8660-surf.dtb \ > qcom-msm8960-cdp.dtb \ > diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts > b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts > new file mode 100644 > index 0000000..41123be > --- /dev/null > +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts > @@ -0,0 +1,8 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// Copyright (c) 2017, The Linux Foundation. All rights reserved. > + > +#include "qcom-ipq4019-ap.dk04.1.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1"; > +}; It seems major diff between DK01 C1 and other variants is qpic nand. qpic nand is only available in C1 so do we need to disable the nand is base dk04 dtsi and enable it in this C1 dts only. same for qpic bam. Thanks, Abhishek