Re: [PATCH v3 4/4] thermal: cpuidle: Register cpuidle cooling device

[Daniel Lezcano <daniel.lezcano@linaro.org>]

Hi Lorenzo, Sudeep,

other patches of the series are acked / reviewed.

If you are ok with these changes, could you add your acked-by so I can
merge all the series via the thermal tree?

Thanks

  -- Daniel

On 15/04/2020 00:08, Daniel Lezcano wrote:
> The cpuidle driver can be used as a cooling device by injecting idle
> cycles. The DT binding for the idle state added an optional
> 
> When the property is set, register the cpuidle driver with the idle
> state node pointer as a cooling device. The thermal framework will do
> the association automatically with the thermal zone via the
> cooling-device defined in the device tree cooling-maps section.
> 
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
>  drivers/cpuidle/cpuidle-arm.c  | 5 +++++
>  drivers/cpuidle/cpuidle-psci.c | 5 +++++
>  2 files changed, 10 insertions(+)
> 
> diff --git a/drivers/cpuidle/cpuidle-arm.c b/drivers/cpuidle/cpuidle-arm.c
> index 9e5156d39627..2406ac0ae134 100644
> --- a/drivers/cpuidle/cpuidle-arm.c
> +++ b/drivers/cpuidle/cpuidle-arm.c
> @@ -8,6 +8,7 @@
>  
>  #define pr_fmt(fmt) "CPUidle arm: " fmt
>  
> +#include <linux/cpu_cooling.h>
>  #include <linux/cpuidle.h>
>  #include <linux/cpumask.h>
>  #include <linux/cpu_pm.h>
> @@ -124,6 +125,10 @@ static int __init arm_idle_init_cpu(int cpu)
>  	if (ret)
>  		goto out_kfree_drv;
>  
> +	ret = cpuidle_cooling_register(drv);
> +	if (ret)
> +		pr_err("Failed to register the idle cooling device: %d\n", ret);
> +
>  	return 0;
>  
>  out_kfree_drv:
> diff --git a/drivers/cpuidle/cpuidle-psci.c b/drivers/cpuidle/cpuidle-psci.c
> index edd7a54ef0d3..8e805bff646f 100644
> --- a/drivers/cpuidle/cpuidle-psci.c
> +++ b/drivers/cpuidle/cpuidle-psci.c
> @@ -9,6 +9,7 @@
>  #define pr_fmt(fmt) "CPUidle PSCI: " fmt
>  
>  #include <linux/cpuhotplug.h>
> +#include <linux/cpu_cooling.h>
>  #include <linux/cpuidle.h>
>  #include <linux/cpumask.h>
>  #include <linux/cpu_pm.h>
> @@ -305,6 +306,10 @@ static int __init psci_idle_init_cpu(int cpu)
>  	if (ret)
>  		goto out_kfree_drv;
>  
> +	ret = cpuidle_cooling_register(drv);
> +	if (ret)
> +		pr_err("Failed to register the idle cooling device: %d\n", ret);
> +
>  	return 0;
>  
>  out_kfree_drv:
> 


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel