From: daniel.lezcano@linaro.org (Daniel Lezcano)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/4] arm64: Add initial Actions Semi S700 and CubieBoard7 support
Date: Mon, 18 Sep 2017 23:50:11 +0200 [thread overview]
Message-ID: <6beabaab-d95f-4ac9-96f1-7c1c98bd7811@linaro.org> (raw)
In-Reply-To: <20170911022241.11603-1-afaerber@suse.de>
Hi Andreas,
On 11/09/2017 04:22, Andreas F?rber wrote:
> Hello,
>
> This series prepares the Actions Semi S700 SoC and Cubietech CubieBoard7.
> It boots equally far as the S900 based Bubblegum-96 these patches are based on,
> i.e. into an initrd with serial and all four cores up.
>
> I have not yet managed to download the CubieBoard7 sources from Baidu, and the
> Mega download has not yet been fixed, so this is based on the S700 datasheet
> and /proc/device-tree/ from the preinstalled Android.
>
> Lacking sources and instructions to replace the bootloader on eMMC or to try
> booting from SD, the only working way I've found to boot mainline kernels
> appears to be booting into Android, then issuing "reboot bootloader". U-Boot
> is lacking the saveenv command, so it wasn't possible to change the bootdelay
> to facilitate this.
>
> Cf. https://en.opensuse.org/HCL:CubieBoard7
>
> Work branch:
> https://github.com/afaerber/linux/commits/bg96-next
>
> Have a lot of fun!
>
> Cheers,
> Andreas
>
> Cc: Ahha Lee <lee@cubietech.com>
> Cc: support at cubietech.com
>
> Cc: devicetree at vger.kernel.org
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
>
> Andreas F?rber (4):
> dt-bindings: arm: actions: Add S700 and CubieBoard7
> dt-bindings: timer: Add Actions Semi S700
> clocksource: owl: Prepare S700
> arm64: dts: actions: Add S700 and CubieBoard7
>
> Documentation/devicetree/bindings/arm/actions.txt | 15 ++
> .../bindings/timer/actions,owl-timer.txt | 1 +
Usually sub system maintainers are also Cc'ed with Dt bindings
definitions and usage.
> arch/arm64/boot/dts/actions/Makefile | 2 +
> arch/arm64/boot/dts/actions/s700-cubieboard7.dts | 47 ++++++
> arch/arm64/boot/dts/actions/s700.dtsi | 164 +++++++++++++++++++++
> drivers/clocksource/owl-timer.c | 1 +
> 6 files changed, 230 insertions(+)
> create mode 100644 arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> create mode 100644 arch/arm64/boot/dts/actions/s700.dtsi
>
--
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
next prev parent reply other threads:[~2017-09-18 21:50 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-11 2:22 [PATCH 0/4] arm64: Add initial Actions Semi S700 and CubieBoard7 support Andreas Färber
2017-09-11 2:22 ` [PATCH 1/4] dt-bindings: arm: actions: Add S700 and CubieBoard7 Andreas Färber
2017-09-18 20:45 ` Rob Herring
2017-09-11 2:22 ` [PATCH 2/4] dt-bindings: timer: Add Actions Semi S700 Andreas Färber
2017-09-18 20:59 ` Rob Herring
2017-09-11 2:22 ` [PATCH 3/4] clocksource: owl: Prepare S700 Andreas Färber
2017-09-18 21:52 ` Daniel Lezcano
2017-09-11 2:22 ` [PATCH 4/4] arm64: dts: actions: Add S700 and CubieBoard7 Andreas Färber
2017-09-18 21:50 ` Daniel Lezcano [this message]
2017-09-19 5:08 ` [PATCH 0/4] arm64: Add initial Actions Semi S700 and CubieBoard7 support Andreas Färber
2017-09-19 5:37 ` Daniel Lezcano
2017-09-19 6:12 ` Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6beabaab-d95f-4ac9-96f1-7c1c98bd7811@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox