From: Nicolas Dufresne <nicolas@ndufresne.ca>
To: John Keeping <jkeeping@inmusicbrands.com>, linux-media@vger.kernel.org
Cc: Jacob Chen <jacob-chen@iotwrt.com>,
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] media: rockchip: rga: fix rotation on rev0 hardware
Date: Tue, 29 Sep 2026 14:42:36 -0400 [thread overview]
Message-ID: <6cbde49a7440bb59faa9eab91dfb8e99947be993.camel@ndufresne.ca> (raw)
In-Reply-To: <20260929094142.928758-1-jkeeping@inmusicbrands.com>
[-- Attachment #1: Type: text/plain, Size: 2929 bytes --]
Le mardi 29 septembre 2026 à 10:41 +0100, John Keeping a écrit :
> On RK3288 where the RGA reports version zero [1], rotating a buffer
> gives corrupt output where one edge will be truncated. This is a result
> of some adjustment done specifically for hardware revision zero. But it
> seems this is not necessary and there is no evidence for why this
> adjustment should be applied on these hardware revisions.
>
> Comparing the TRMs between RK3288 with revision zero and RK3588 with
> revision 3.2 there is evidence of new features supported by later
> hardware, but nothing indicating any difference in behaviour for
> rotation which is supported by all hardware revisions.
>
> The logic here looks wrong anyway, since it's bizarre that minor
> revision zero would need the adjustment for _all_ major revisions. This
> was added with the initial version of the driver in commit f7e7b48e6d796
> ("[media] rockchip/rga: v4l2 m2m support") so there is no detail in the
> Git history to indicate why this special-case might be needed.
>
> [1] Comparing with the vendor code, it seems this is actually 1.3 with
> the hardware reporting zero more by coincidence than design since the
> version register is not defined for RK3288.
>
> Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Fixes: f7e7b48e6d796 ("[media] rockchip/rga: v4l2 m2m support")
Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
> ---
> base-commit: 2579cbe68005f46fc7f8f95364f6b101b07b9d1c
>
> v3:
> - Rebase on media-committers/fixes and add base-commit to hopefully make
> CI happy (patch content is completely unchanged)
> v2:
> - Remove variable that is unused after this change
> ---
> drivers/media/platform/rockchip/rga/rga-hw.c | 8 --------
> 1 file changed, 8 deletions(-)
>
> diff --git a/drivers/media/platform/rockchip/rga/rga-hw.c b/drivers/media/platform/rockchip/rga/rga-hw.c
> index be1bc8ddbd03b..2e7ec8b7c20f7 100644
> --- a/drivers/media/platform/rockchip/rga/rga-hw.c
> +++ b/drivers/media/platform/rockchip/rga/rga-hw.c
> @@ -158,7 +158,6 @@ static void rga_cmd_set_dst_addr(struct rga_ctx *ctx, dma_addr_t dma_addr)
>
> static void rga_cmd_set_trans_info(struct rga_ctx *ctx)
> {
> - struct rockchip_rga *rga = ctx->rga;
> u32 *dest = ctx->cmdbuf_virt;
> unsigned int scale_dst_w, scale_dst_h;
> unsigned int src_h, src_w, dst_h, dst_w;
> @@ -251,13 +250,6 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx)
> */
> if (src_info.data.rot_mode == RGA_SRC_ROT_MODE_90_DEGREE ||
> src_info.data.rot_mode == RGA_SRC_ROT_MODE_270_DEGREE) {
> - if (rga->version.major == 0 || rga->version.minor == 0) {
> - if (dst_w == src_h)
> - src_h -= 8;
> - if (abs(src_w - dst_h) < 16)
> - src_w -= 16;
> - }
> -
> scale_dst_h = dst_w;
> scale_dst_w = dst_h;
> } else {
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
prev parent reply other threads:[~2026-09-29 18:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-29 9:41 [PATCH v3] media: rockchip: rga: fix rotation on rev0 hardware John Keeping
2026-09-29 18:42 ` Nicolas Dufresne [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6cbde49a7440bb59faa9eab91dfb8e99947be993.camel@ndufresne.ca \
--to=nicolas@ndufresne.ca \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=heiko@sntech.de \
--cc=jacob-chen@iotwrt.com \
--cc=jkeeping@inmusicbrands.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox