From: Hans Verkuil <hverkuil+cisco@kernel.org>
To: Alain Volmat <alain.volmat@foss.st.com>,
Hugues Fruchet <hugues.fruchet@foss.st.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-media@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 00/13] media: stm32: dcmipp: add support for MP2x pixel pipes
Date: Mon, 27 Jul 2026 15:53:11 +0200 [thread overview]
Message-ID: <6decf51d-137c-4230-b823-64e61d76d0b8@kernel.org> (raw)
In-Reply-To: <20260724-stm32-dcmipp-pixel-pipes-support-v3-0-f77fe7e723d9@foss.st.com>
Hi Alain,
On 24/07/2026 18:13, Alain Volmat wrote:
> This series add support for the main & aux pixel pipes
> available on the MP2x. In addition to the byte pipe
> already available, the DCMIPP is able to process two
> other streams in parallel, including ISP operations
> such as demosaicing, exposure etc, post-processing operations
> such as cropping, downscaling and various pixel formats
> output.
>
> This series introduces the whole DCMIPP pipelines including
> static configuration of the ISP part (such as demosaicing).
> Dynamic control of the ISP as well as statistic extraction
> part will be added on top of this serie via usage of 2 other
> video devices (input & output) for statistics extraction and
> dynamic ISP parameter injection.
Since this adds a new subdev, can you post the output of
'v4l2-compliance -s' for the MP2x?
Just to be certain all corner cases have been handled.
Regards,
Hans
>
> Changes in v3:
> - Rebased on top of kernel v7.2-rc4
> - Fixed most of Sashiko review points
> - Link to v2: https://lore.kernel.org/r/20260602-stm32-dcmipp-pixel-pipes-support-v2-0-3c76b5f93157@foss.st.com
>
> Changes in v2:
> - Rebased on top of kernel v7.1-rc6
> - check-patch minor fixes
> - replaced kzalloc(.., sizeof(..),) with kzalloc_obj
> - Link to v1: https://lore.kernel.org/r/20260202-stm32-dcmipp-pixel-pipes-support-v1-0-8d8d51f5e014@foss.st.com
>
> ---
> Alain Volmat (13):
> media: stm32: dcmipp: share struct dcmipp_device among subdevs
> media: stm32: dcmipp: make dcmipp_state & cmsr2 read common
> media: stm32: dcmipp: bytecap: protect CMIER register access
> media: stm32: dcmipp: move common structures in dcmipp-common.h
> media: stm32: dcmipp: correct swap in YUYV data with parallel input
> media: stm32: dcmipp: configure csi input of all pipes on stm32mp25
> media: stm32: dcmipp: introduce a dcmipp global media_pipeline
> media: stm32: dcmipp: add pixel pipes helper functions
> media: stm32: dcmipp: addition of a dcmipp-isp subdev
> media: stm32: dcmipp: pixelproc: addition of dcmipp-pixelproc subdev
> media: stm32: dcmipp: add pixel-pipe support in bytecap
> media: stm32: dcmipp: rename bytecap into capture
> media: stm32: dcmipp: instantiate & link stm32mp25 subdevs
>
> .../media/platform/st/stm32/stm32-dcmipp/Makefile | 3 +-
> .../st/stm32/stm32-dcmipp/dcmipp-byteproc.c | 27 +-
> .../{dcmipp-bytecap.c => dcmipp-capture.c} | 600 +++++++++----
> .../platform/st/stm32/stm32-dcmipp/dcmipp-common.h | 98 ++-
> .../platform/st/stm32/stm32-dcmipp/dcmipp-core.c | 124 ++-
> .../platform/st/stm32/stm32-dcmipp/dcmipp-input.c | 124 ++-
> .../platform/st/stm32/stm32-dcmipp/dcmipp-isp.c | 491 +++++++++++
> .../st/stm32/stm32-dcmipp/dcmipp-pixelcommon.c | 180 ++++
> .../st/stm32/stm32-dcmipp/dcmipp-pixelcommon.h | 41 +
> .../st/stm32/stm32-dcmipp/dcmipp-pixelproc.c | 941 +++++++++++++++++++++
> 10 files changed, 2344 insertions(+), 285 deletions(-)
> ---
> base-commit: 48a5a7ab8d6ab7090564339e039c421f315de912
> change-id: 20251219-stm32-dcmipp-pixel-pipes-support-b42924c0b4e5
>
> Best regards,
> --
> Alain Volmat <alain.volmat@foss.st.com>
>
>
prev parent reply other threads:[~2026-07-27 13:53 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-24 16:13 [PATCH v3 00/13] media: stm32: dcmipp: add support for MP2x pixel pipes Alain Volmat
2026-07-24 16:13 ` [PATCH v3 01/13] media: stm32: dcmipp: share struct dcmipp_device among subdevs Alain Volmat
2026-07-24 16:13 ` [PATCH v3 02/13] media: stm32: dcmipp: make dcmipp_state & cmsr2 read common Alain Volmat
2026-07-24 16:13 ` [PATCH v3 03/13] media: stm32: dcmipp: bytecap: protect CMIER register access Alain Volmat
2026-07-24 16:13 ` [PATCH v3 04/13] media: stm32: dcmipp: move common structures in dcmipp-common.h Alain Volmat
2026-07-24 16:13 ` [PATCH v3 05/13] media: stm32: dcmipp: correct swap in YUYV data with parallel input Alain Volmat
2026-07-24 16:13 ` [PATCH v3 06/13] media: stm32: dcmipp: configure csi input of all pipes on stm32mp25 Alain Volmat
2026-07-24 16:13 ` [PATCH v3 07/13] media: stm32: dcmipp: introduce a dcmipp global media_pipeline Alain Volmat
2026-07-24 16:13 ` [PATCH v3 08/13] media: stm32: dcmipp: add pixel pipes helper functions Alain Volmat
2026-07-24 16:13 ` [PATCH v3 09/13] media: stm32: dcmipp: addition of a dcmipp-isp subdev Alain Volmat
2026-07-24 16:13 ` [PATCH v3 10/13] media: stm32: dcmipp: pixelproc: addition of dcmipp-pixelproc subdev Alain Volmat
2026-07-27 13:49 ` Hans Verkuil
2026-07-24 16:13 ` [PATCH v3 11/13] media: stm32: dcmipp: add pixel-pipe support in bytecap Alain Volmat
2026-07-24 16:13 ` [PATCH v3 12/13] media: stm32: dcmipp: rename bytecap into capture Alain Volmat
2026-07-24 16:13 ` [PATCH v3 13/13] media: stm32: dcmipp: instantiate & link stm32mp25 subdevs Alain Volmat
2026-07-27 13:53 ` Hans Verkuil [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6decf51d-137c-4230-b823-64e61d76d0b8@kernel.org \
--to=hverkuil+cisco@kernel.org \
--cc=alain.volmat@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=hugues.fruchet@foss.st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mchehab@kernel.org \
--cc=mcoquelin.stm32@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox