From mboxrd@z Thu Jan 1 00:00:00 1970 From: jsarha@ti.com (Jyri Sarha) Date: Fri, 2 Sep 2016 15:29:27 +0300 Subject: [PATCH 0/3] drm/tilcdc: Some fixes for LCDC rev1 In-Reply-To: References: <20160823125701.25700-1-kbeldan@baylibre.com> Message-ID: <6ebd85dd-0ffd-ded3-102d-04b80f82c368@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 09/01/16 01:11, Kevin Hilman wrote: > Hi Jyri, > > Jyri Sarha writes: > >> On 08/23/16 15:56, Karl Beldan wrote: >>> Hi, >>> >>> I found some missing bits for rev1 of the LCDC and here are some of the >>> changes I am using to use the DRM driver on an LCDCK (which has a rev1). >>> 1/3 seems required by rev1 of the IP and without it my the LCDC on my >>> LCDK keeps can't sync, 2/3 is required by the driver logic, while 3/3 >>> is less of a requirement. >> >> I'll drop 3/3, because my recent patches should take care of that: >> http://www.spinics.net/lists/devicetree/msg138885.html >> >> However, there will be v2 round of those patches. Only the DT binding >> and its default value should change. >> >>> Although 1,2/3 would have fitted drm-fixes I based them on drm-next as >>> 2/3 would conflict with the recent changes in drm-next. >>> >> >> I'll pick these two up for my next pull request. Thanks! >> > > Can you share a branch which has your current series and these fixes > included, so we can use that as a baseline for further development? > Hi Kevin, My pull request from yesterday[1] has all the latest code changes. It is missing the dts changes, but I don't think you need those. Anyway, if you do you can pick them from here: https://github.com/jsarha/linux drm-next-tilcdc-atomic-wip [1] https://github.com/jsarha/linux tags/tilcdc-4.9-fixes or http://www.spinics.net/lists/dri-devel/msg117055.html Regards, Jyri