From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
Paul Elder <paul.elder@ideasonboard.com>
Cc: kieran.bingham@ideasonboard.com, tomi.valkeinen@ideasonboard.com,
umang.jain@ideasonboard.com,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Paul Elder <paul.elder@ideasonboard.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Tim Harvey <tharvey@gateworks.com>,
Philippe Schenker <philippe.schenker@toradex.com>,
Marek Vasut <marex@denx.de>,
Gregor Herburger <gregor.herburger@ew.tq-group.com>,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
open list <linux-kernel@vger.kernel.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 2/2] arm64: dts: imx8mp: Add overlays for ISP instances
Date: Wed, 29 Nov 2023 11:20:07 +0100 [thread overview]
Message-ID: <7122934.GXAFRqVoOG@steina-w> (raw)
In-Reply-To: <20231129093113.255161-3-paul.elder@ideasonboard.com>
Hi Paul,
thanks for the patch.
Am Mittwoch, 29. November 2023, 10:31:13 CET schrieb Paul Elder:
> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> Add two overlay to enable each ISP instance. The ISP is wired directly
> to the CSIS for now, bypassing the ISI completely.
I'm not sure if this is worth adding in a separate overlay.
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 2 ++
> .../arm64/boot/dts/freescale/imx8mp-isp1.dtso | 36 +++++++++++++++++++
> .../arm64/boot/dts/freescale/imx8mp-isp2.dtso | 36 +++++++++++++++++++
> 3 files changed, 74 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile
> b/arch/arm64/boot/dts/freescale/Makefile index 300049037eb0..f97dfac11189
> 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -113,6 +113,8 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-isp1.dtbo
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-isp2.dtbo
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso
> b/arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso new file mode 100644
> index 000000000000..cf394ed224ab
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso
> @@ -0,0 +1,36 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2022 Ideas on Board Oy
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/media/video-interfaces.h>
> +
> +&isi_0 {
> + status = "disabled";
ISI is disabled by default. What is your intention here?
> +
> + ports {
> + port@0 {
> + /delete-node/ endpoint;
This doesn't work in overlays. See [1]. Otherwise the OF graph connections
look fine to me. I'm using the same in my local overlay.
Best regards,
Alexander
[1] https://lore.kernel.org/all/
CAMuHMdWu4KZbBkvEofUV2wuA1g2S=XHHM3RUN1cNrcZBkhsPZA@mail.gmail.com/
> + };
> + };
> +};
> +
> +&isp_0 {
> + status = "okay";
> +
> + ports {
> + port@1 {
> + isp0_in: endpoint {
> + bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
> + remote-endpoint = <&mipi_csi_0_out>;
> + };
> + };
> + };
> +};
> +
> +&mipi_csi_0_out {
> + remote-endpoint = <&isp0_in>;
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso
> b/arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso new file mode 100644
> index 000000000000..14e2e7b2617f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso
> @@ -0,0 +1,36 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2022 Ideas on Board Oy
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/media/video-interfaces.h>
> +
> +&isi_0 {
> + status = "disabled";
> +
> + ports {
> + port@1 {
> + /delete-node/ endpoint;
> + };
> + };
> +};
> +
> +&isp_1 {
> + status = "okay";
> +
> + ports {
> + port@1 {
> + isp1_in: endpoint {
> + bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
> + remote-endpoint = <&mipi_csi_1_out>;
> + };
> + };
> + };
> +};
> +
> +&mipi_csi_1_out {
> + remote-endpoint = <&isp1_in>;
> +};
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-11-29 10:20 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20231129093113.255161-1-paul.elder@ideasonboard.com>
2023-11-29 9:31 ` [PATCH 1/2] arm64: dts: imx8mp: Add DT nodes for the two ISPs Paul Elder
2023-11-29 10:17 ` Alexander Stein
2023-11-29 11:59 ` Fabio Estevam
2023-11-29 13:49 ` Adam Ford
2023-11-29 14:26 ` Fabio Estevam
2023-11-29 14:44 ` Laurent Pinchart
2024-03-20 12:35 ` Adam Ford
2024-03-25 15:14 ` Laurent Pinchart
2024-03-25 15:17 ` Adam Ford
2023-11-29 9:31 ` [PATCH 2/2] arm64: dts: imx8mp: Add overlays for ISP instances Paul Elder
2023-11-29 10:20 ` Alexander Stein [this message]
2023-11-29 15:16 ` Laurent Pinchart
2023-11-30 9:51 ` Alexander Stein
2023-11-30 13:48 ` Adam Ford
2023-11-30 14:02 ` Kieran Bingham
2023-11-30 14:09 ` Adam Ford
2023-11-30 14:22 ` Alexander Stein
2023-11-30 14:20 ` Laurent Pinchart
2023-11-30 15:34 ` Alexander Stein
2023-11-30 15:54 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7122934.GXAFRqVoOG@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=gregor.herburger@ew.tq-group.com \
--cc=kernel@pengutronix.de \
--cc=kieran.bingham@ideasonboard.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=marex@denx.de \
--cc=paul.elder@ideasonboard.com \
--cc=philippe.schenker@toradex.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=tharvey@gateworks.com \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=umang.jain@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox