From: heiko@sntech.de (Heiko Stuebner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] arm64: dts: rockchip: Add basic DVFS support for RK3368
Date: Mon, 21 Aug 2017 12:10:34 +0200 [thread overview]
Message-ID: <71592497.yCJ5sVJQSp@phil> (raw)
In-Reply-To: <20170818121701.12668-1-romain.perier@collabora.com>
Am Freitag, 18. August 2017, 14:17:01 CEST schrieb Romain Perier:
> This adds and enable the operating points that have been tested and are
> currently supported by the SoC. This also adds clocks for ARMCLKL and
> ARMCLKB.
>
> Signed-off-by: Romain Perier <romain.perier@collabora.com>
> ---
>
> Changes in v2:
> - Switched to binding v2 for operating-points
> - Improved commit message
> - Rebased onto linux-next
>
> arch/arm64/boot/dts/rockchip/rk3368.dtsi | 75 +++++++++++++++++++++++++++++++-
> 1 file changed, 73 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> index b6f234f10585..7f42a9111062 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> @@ -113,7 +113,8 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x0>;
> enable-method = "psci";
> -
> + clocks = <&cru ARMCLKL>;
> + operating-points-v2 = <&cluster0_opp>;
> #cooling-cells = <2>; /* min followed by max */
> };
>
> @@ -122,6 +123,8 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x1>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKL>;
> + operating-points-v2 = <&cluster0_opp>;
> };
>
> cpu_l2: cpu at 2 {
> @@ -129,6 +132,8 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x2>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKL>;
> + operating-points-v2 = <&cluster0_opp>;
> };
>
> cpu_l3: cpu at 3 {
> @@ -136,6 +141,8 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x3>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKL>;
> + operating-points-v2 = <&cluster0_opp>;
> };
>
> cpu_b0: cpu at 100 {
> @@ -143,7 +150,8 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x100>;
> enable-method = "psci";
> -
> + clocks = <&cru ARMCLKB>;
> + operating-points-v2 = <&cluster1_opp>;
> #cooling-cells = <2>; /* min followed by max */
> };
>
> @@ -152,6 +160,8 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x101>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKB>;
> + operating-points-v2 = <&cluster1_opp>;
> };
>
> cpu_b2: cpu at 102 {
> @@ -159,6 +169,8 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x102>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKB>;
> + operating-points-v2 = <&cluster1_opp>;
> };
>
> cpu_b3: cpu at 103 {
> @@ -166,9 +178,68 @@
> compatible = "arm,cortex-a53", "arm,armv8";
> reg = <0x0 0x103>;
> enable-method = "psci";
> + clocks = <&cru ARMCLKB>;
> + operating-points-v2 = <&cluster1_opp>;
> };
> };
>
> + cluster0_opp: opp-table0 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp00 {
> + opp-hz = /bits/ 64 <312000000>;
> + opp-microvolt = <950000>;
> + clock-latency-ns = <40000>;
> + };
> + opp01 {
> + opp-hz = /bits/ 64 <408000000>;
> + opp-microvolt = <950000>;
> + };
> + opp02 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <950000>;
> + };
> + opp03 {
> + opp-hz = /bits/ 64 <816000000>;
> + opp-microvolt = <1025000>;
> + };
> + opp04 {
> + opp-hz = /bits/ 64 <1008000000>;
> + opp-microvolt = <1125000>;
> + };
> + };
> +
> + cluster1_opp: opp-table1 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp00 {
> + opp-hz = /bits/ 64 <312000000>;
> + opp-microvolt = <950000>;
> + clock-latency-ns = <40000>;
> + };
> + opp01 {
> + opp-hz = /bits/ 64 <408000000>;
> + opp-microvolt = <950000>;
> + };
> + opp02 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <950000>;
> + };
> + opp03 {
> + opp-hz = /bits/ 64 <816000000>;
> + opp-microvolt = <975000>;
> + };
> + opp04 {
> + opp-hz = /bits/ 64 <1008000000>;
> + opp-microvolt = <1050000>;
> + };
> + };
> +
> +
> +
> +
please don't insert multiple empty lines in future patches.
I've removed the excess blank lines and applied it for 4.14
Heiko
prev parent reply other threads:[~2017-08-21 10:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-18 12:17 [PATCH v2] arm64: dts: rockchip: Add basic DVFS support for RK3368 Romain Perier
2017-08-21 10:10 ` Heiko Stuebner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=71592497.yCJ5sVJQSp@phil \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox