From: Tero Kristo <t-kristo@ti.com>
To: Vignesh R <vigneshr@ti.com>, Nishanth Menon <nm@ti.com>
Cc: devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/2] arm64: dts: ti: k3-am654: Add McSPI DT nodes
Date: Thu, 13 Dec 2018 17:08:06 +0200 [thread overview]
Message-ID: <723772e0-162b-edfb-75ab-0461925a9930@ti.com> (raw)
In-Reply-To: <3420b087-673b-b5be-ed5a-bf8d95ecc4dc@ti.com>
On 13/12/2018 17:03, Vignesh R wrote:
>
>
> On 13-Dec-18 8:29 PM, Tero Kristo wrote:
>> On 09/12/2018 12:22, Vignesh R wrote:
>>> There are 3 instances of McSPI in MCU domain and 4 instances in Main
>>> domain.
>>> Add DT nodes for all McSPI instances present on AM654 SoC.
>>>
>>> Signed-off-by: Vignesh R <vigneshr@ti.com>
>>> ---
>>> arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 52 ++++++++++++++++++++++++
>>> arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 30 ++++++++++++++
>>> 2 files changed, 82 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>>> b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>>> index 0a0a8fc5df64..6c71e67b8988 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>>> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>>> @@ -138,4 +138,56 @@
>>> clocks = <&k3_clks 39 0>;
>>> clock-names = "fck";
>>> };
>>> +
>>> + main_spi0: spi@2100000 {
>>> + compatible = "ti,am654-mcspi","ti,omap4-mcspi";
>>
>> WARNING: DT compatible string "ti,am654-mcspi" appears un-documented --
>> check ../../Documentation/devicetree/bindings/
>> #63: FILE: arch/arm64/boot/dts/ti/k3-am65-main.dtsi:143:
>> + compatible = "ti,am654-mcspi","ti,omap4-mcspi";
>>
>> Same for the rest of the nodes.
>>
>> Did you forget documentation part?
>>
>
> Documentation patch as been accepted into SPI tree and part of linux-next:
> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=abc61f47a70f7c8331f00eff1ccb6557a9d4c224
Ok thanks for the info.
-Tero
>
> Regards
> Vignesh
>
>> -Tero
>>
>>> + reg = <0x0 0x2100000 0x0 0x400>;
>>> + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&k3_clks 137 1>;
>>> + power-domains = <&k3_pds 137>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + };
>>> +
>>> + main_spi1: spi@2110000 {
>>> + compatible = "ti,am654-mcspi","ti,omap4-mcspi";
>>> + reg = <0x0 0x2110000 0x0 0x400>;
>>> + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&k3_clks 138 1>;
>>> + power-domains = <&k3_pds 138>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + assigned-clocks = <&k3_clks 137 1>;
>>> + assigned-clock-rates = <48000000>;
>>> + };
>>> +
>>> + main_spi2: spi@2120000 {
>>> + compatible = "ti,am654-mcspi","ti,omap4-mcspi";
>>> + reg = <0x0 0x2120000 0x0 0x400>;
>>> + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&k3_clks 139 1>;
>>> + power-domains = <&k3_pds 139>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + };
>>> +
>>> + main_spi3: spi@2130000 {
>>> + compatible = "ti,am654-mcspi","ti,omap4-mcspi";
>>> + reg = <0x0 0x2130000 0x0 0x400>;
>>> + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&k3_clks 140 1>;
>>> + power-domains = <&k3_pds 140>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + };
>>> +
>>> + main_spi4: spi@2140000 {
>>> + compatible = "ti,am654-mcspi","ti,omap4-mcspi";
>>> + reg = <0x0 0x2140000 0x0 0x400>;
>>> + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&k3_clks 141 1>;
>>> + power-domains = <&k3_pds 141>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + };
>>> };
>>> diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
>>> b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
>>> index 1fd027748e1f..1aeae52fb239 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
>>> +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
>>> @@ -26,4 +26,34 @@
>>> clocks = <&k3_clks 114 1>;
>>> power-domains = <&k3_pds 114>;
>>> };
>>> +
>>> + mcu_spi0: spi@40300000 {
>>> + compatible = "ti,am654-mcspi","ti,omap4-mcspi";
>>> + reg = <0x0 0x40300000 0x0 0x400>;
>>> + interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&k3_clks 142 1>;
>>> + power-domains = <&k3_pds 142>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + };
>>> +
>>> + mcu_spi1: spi@40310000 {
>>> + compatible = "ti,am654-mcspi","ti,omap4-mcspi";
>>> + reg = <0x0 0x40310000 0x0 0x400>;
>>> + interrupts = <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&k3_clks 143 1>;
>>> + power-domains = <&k3_pds 143>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + };
>>> +
>>> + mcu_spi2: spi@40320000 {
>>> + compatible = "ti,am654-mcspi","ti,omap4-mcspi";
>>> + reg = <0x0 0x40320000 0x0 0x400>;
>>> + interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&k3_clks 144 1>;
>>> + power-domains = <&k3_pds 144>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + };
>>> };
>>>
>>
>> --
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-12-13 15:08 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-09 10:22 [PATCH 0/2] AM654: Add McSPI DT entry Vignesh R
2018-12-09 10:22 ` [PATCH 1/2] arm64: dts: ti: k3-am654: Add McSPI DT nodes Vignesh R
2018-12-13 14:59 ` Tero Kristo
2018-12-13 15:03 ` Vignesh R
2018-12-13 15:08 ` Tero Kristo [this message]
2018-12-09 10:22 ` [PATCH 2/2] arm64: dts: ti: k3-am654: Enable main domain McSPI0 Vignesh R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=723772e0-162b-edfb-75ab-0461925a9930@ti.com \
--to=t-kristo@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox