From mboxrd@z Thu Jan  1 00:00:00 1970
From: sudeep.holla@arm.com (Sudeep Holla)
Date: Wed, 22 Mar 2017 18:09:42 +0000
Subject: [PATCH v2 4/6] arm64: dts: rockchip: add core dtsi file for
 RK3328 SoCs
In-Reply-To: <1489670244-13328-5-git-send-email-cl@rock-chips.com>
References: <1489670244-13328-1-git-send-email-cl@rock-chips.com>
 <1489670244-13328-5-git-send-email-cl@rock-chips.com>
Message-ID: <7240249b-690a-5800-0b46-fb93a49e2af1@arm.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org



On 16/03/17 13:17, cl at rock-chips.com wrote:
> From: Liang Chen <cl@rock-chips.com>
> 
> This patch adds core dtsi file for Rockchip RK3328 SoCs.
> 
> Signed-off-by: Liang Chen <cl@rock-chips.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3328.dtsi | 1362 ++++++++++++++++++++++++++++++
>  1 file changed, 1362 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3328.dtsi
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> new file mode 100644
> index 0000000..a92955c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi

[...]

> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu at 0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53", "arm,armv8";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +			clocks = <&cru ARMCLK>;

Why "clocks" property is present only for cpu0 ?

-- 
Regards,
Sudeep