* [PATCH v2] arm64: kernel: numa: fix ACPI boot cpu numa node mapping
@ 2016-10-17 14:56 Lorenzo Pieralisi
2016-10-18 8:39 ` Hanjun Guo
0 siblings, 1 reply; 3+ messages in thread
From: Lorenzo Pieralisi @ 2016-10-17 14:56 UTC (permalink / raw)
To: linux-arm-kernel
Commit 7ba5f605f3a0 ("arm64/numa: remove the limitation that cpu0 must
bind to node0") removed the numa cpu<->node mapping restriction whereby
logical cpu 0 always corresponds to numa node 0; removing the
restriction was correct, in that it does not really exist in practice
but the commit only updated the early mapping of logical cpu 0 to its
real numa node for the DT boot path, missing the ACPI one, leading to
boot failures on ACPI systems owing to missing cpu<->node map for
logical cpu 0.
Fix the issue by updating the ACPI boot path with code that carries out
the early cpu<->node mapping also for the boot cpu (ie cpu 0), mirroring
what is currently done in the DT boot path.
Fixes: 7ba5f605f3a0 ("arm64/numa: remove the limitation that cpu0 must bind to node0")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reported-by: Laszlo Ersek <lersek@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Andrew Jones <drjones@redhat.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
---
v1 -> v2
- Updated commit log to reflect boot failures set-ups
arch/arm64/kernel/smp.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index d3f151c..8507703 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -544,6 +544,7 @@ acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor)
return;
}
bootcpu_valid = true;
+ early_map_cpu_to_node(0, acpi_numa_get_nid(0, hwid));
return;
}
--
2.10.0
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH v2] arm64: kernel: numa: fix ACPI boot cpu numa node mapping
2016-10-17 14:56 [PATCH v2] arm64: kernel: numa: fix ACPI boot cpu numa node mapping Lorenzo Pieralisi
@ 2016-10-18 8:39 ` Hanjun Guo
2016-10-19 2:51 ` Leizhen (ThunderTown)
0 siblings, 1 reply; 3+ messages in thread
From: Hanjun Guo @ 2016-10-18 8:39 UTC (permalink / raw)
To: linux-arm-kernel
On 2016/10/17 22:56, Lorenzo Pieralisi wrote:
> Commit 7ba5f605f3a0 ("arm64/numa: remove the limitation that cpu0 must
> bind to node0") removed the numa cpu<->node mapping restriction whereby
> logical cpu 0 always corresponds to numa node 0; removing the
> restriction was correct, in that it does not really exist in practice
> but the commit only updated the early mapping of logical cpu 0 to its
> real numa node for the DT boot path, missing the ACPI one, leading to
> boot failures on ACPI systems owing to missing cpu<->node map for
> logical cpu 0.
>
> Fix the issue by updating the ACPI boot path with code that carries out
> the early cpu<->node mapping also for the boot cpu (ie cpu 0), mirroring
> what is currently done in the DT boot path.
>
> Fixes: 7ba5f605f3a0 ("arm64/numa: remove the limitation that cpu0 must bind to node0")
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Tested-by: Laszlo Ersek <lersek@redhat.com>
> Reported-by: Laszlo Ersek <lersek@redhat.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Laszlo Ersek <lersek@redhat.com>
> Cc: Hanjun Guo <hanjun.guo@linaro.org>
Thanks for the quick response and fix,
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
By the way, I got another boot failure [1] when we have multi
NUMA nodes system with some memory-less nodes (only one node
have memory), we are looking into it now, this patch needs
to be merged first.
Thanks
Hanjun
[1]: boot failure log:
[ 0.000000] NUMA: Adding memblock [0x0 - 0x3fffffff] on node 0
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x3fffffff]
[ 0.000000] NUMA: Adding memblock [0x1400000000 - 0x17ffffffff] on node 1
[ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x1400000000-0x17ffffffff]
[ 0.000000] NUMA: Adding memblock [0x1000000000 - 0x13ffffffff] on node 0
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x1000000000-0x13ffffffff]
[ 0.000000] NUMA: Initmem setup node 0 [mem 0x00000000-0x13fbffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x13fbffe500-0x13fbffffff]
[ 0.000000] NUMA: Initmem setup node 1 [mem 0x1400000000-0x17fbffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x17fbfec500-0x17fbfedfff]
[ 0.000000] NUMA: Initmem setup node 2 [mem
0x00000000-0xffffffffffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x17fbfeaa00-0x17fbfec4ff]
[ 0.000000] NUMA: NODE_DATA(2) on node 1
[ 0.000000] NUMA: Initmem setup node 3 [mem
0x00000000-0xffffffffffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x17fbfe8f00-0x17fbfea9ff]
[ 0.000000] NUMA: NODE_DATA(3) on node 1
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000017fbffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000024fff]
[ 0.000000] node 0: [mem 0x0000000000026000-0x00000000319dffff]
[ 0.000000] node 0: [mem 0x00000000319e0000-0x0000000031a4ffff]
[ 0.000000] node 0: [mem 0x0000000031a50000-0x0000000031b2ffff]
[ 0.000000] node 0: [mem 0x0000000031b30000-0x0000000031b3ffff]
[ 0.000000] node 0: [mem 0x0000000031b40000-0x0000000039baffff]
[ 0.000000] node 0: [mem 0x0000000039bb0000-0x000000003a143fff]
[ 0.000000] node 0: [mem 0x000000003a144000-0x000000003f12ffff]
[ 0.000000] node 0: [mem 0x000000003f130000-0x000000003f15ffff]
[ 0.000000] node 0: [mem 0x000000003f160000-0x000000003fbfffff]
[ 0.000000] node 0: [mem 0x0000001040000000-0x00000013fbffffff]
[ 0.000000] node 1: [mem 0x0000001400000000-0x00000017fbffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000000000-0x00000013fbffffff]
[ 0.000000] Initmem setup node 1 [mem
0x0000001400000000-0x00000017fbffffff]
[ 0.000000] Could not find start_pfn for node 2
[ 0.000000] Initmem setup node 2 [mem
0x0000000000000000-0x0000000000000000]
[ 0.000000] Could not find start_pfn for node 3
[ 0.000000] Initmem setup node 3 [mem
0x0000000000000000-0x0000000000000000]
[ 0.000000] psci: probing for conduit method from ACPI.
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] kernel BUG at mm/percpu.c:1916!
[ 0.000000] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted
4.9.0-rc1-00083-g3dd62e5 #680
[ 0.000000] Hardware name: Hisilicon Hi1616 Evaluation Board (DT)
[ 0.000000] task: ffff000008d5e980 task.stack: ffff000008d50000
[ 0.000000] PC is at pcpu_embed_first_chunk+0x464/0x754
[ 0.000000] LR is at pcpu_embed_first_chunk+0x3f8/0x754
[ 0.000000] pc : [<ffff000008c65af0>] lr : [<ffff000008c65a84>]
pstate: 200000c5
[ 0.000000] sp : ffff000008d53e90
[ 0.000000] x29: ffff000008d53e90 [ 0.000000] x28: 0000000000000000
[ 0.000000]
[ 0.000000] x27: ffff000008d55e50 [ 0.000000] x26: 0000000000000042
[ 0.000000]
[ 0.000000] x25: ffff000008d55d28 [ 0.000000] x24: 0000000000000046
[ 0.000000]
[ 0.000000] x23: 0000000000000040 [ 0.000000] x22: ffff8017fbfcff00
[ 0.000000]
[ 0.000000] x21: ffff000008ca6e20 [ 0.000000] x20: ffff8017fbfd0518
[ 0.000000]
[ 0.000000] x19: 0000000000000042 [ 0.000000] x18: ffff000008e3fb60
[ 0.000000]
[ 0.000000] x17: 000000000000001b [ 0.000000] x16: 000000000000000b
[ 0.000000]
[ 0.000000] x15: 0000001400000000 [ 0.000000] x14: 0000000000000004
[ 0.000000]
[ 0.000000] x13: 0000000000000000 [ 0.000000] x12: 0000000000000069
[ 0.000000]
[ 0.000000] x11: 00000017fbffff00 [ 0.000000] x10: 0000000000000004
[ 0.000000]
[ 0.000000] x9 : 0000000000000000 [ 0.000000] x8 : ffff8017fbfd0f00
[ 0.000000]
[ 0.000000] x7 : 0000000000000000 [ 0.000000] x6 : 0000000000000000
[ 0.000000]
[ 0.000000] x5 : 0000000000000000 [ 0.000000] x4 : 000000000000003f
[ 0.000000]
[ 0.000000] x3 : 0000000000000040 [ 0.000000] x2 : 0000000000000040
[ 0.000000]
[ 0.000000] x1 : 0000000000000001 [ 0.000000] x0 : ffff000008ca7328
[ 0.000000]
[ 0.000000]
[ 0.000000] Process swapper (pid: 0, stack limit = 0xffff000008d50020)
[ 0.000000] Stack: (0xffff000008d53e90 to 0xffff000008d54000)
[ 0.000000] 3e80: ffff000008d53f60
ffff000008c5616c
[ 0.000000] 3ea0: ffff000008ca5a08 ffff000008e2a000 ffff000008e2a000
ffff000008d55000
[ 0.000000] 3ec0: ffff000008ca5a08 ffff8017fbfffe80 0000000000000168
000000003c96a518
[ 0.000000] 3ee0: 000000003c971b98 0000000000c50018 ffff000008d53f60
ffff000008c56078
[ 0.000000] 3f00: ffff000008d1f000 ffff000008d14000 0000000000007480
0000000000002000
[ 0.000000] 3f20: ffff000008c560b0 0000000000001000 ffff000008d55e50
ffff000008d55d28
[ 0.000000] 3f40: ffff000008ca6000 0000000000000040 0000000000000001
0000000000000040
[ 0.000000] 3f60: ffff000008d53fa0 ffff000008c508d4 ffff000008ca5a08
ffff000008e2a000
[ 0.000000] 3f80: ffff000008e2a000 ffff000008d55000 ffff000008ca5a08
ffff000008c508d0
[ 0.000000] 3fa0: ffff000008d53ff0 ffff000008c501d8 000000003c94fa98
000000001e400000
[ 0.000000] 3fc0: 000000001e400000 000000025497ba19 0000000000000000
000000003f198a08
[ 0.000000] 3fe0: 0000000000000000 ffff000008ca5a08 0000000000000000
00000000008a325c
[ 0.000000] Call trace:
[ 0.000000] Exception stack(0xffff000008d53cc0 to 0xffff000008d53df0)
[ 0.000000] 3cc0: 0000000000000042 0001000000000000 ffff000008d53e90
ffff000008c65af0
[ 0.000000] 3ce0: ffff000008d53d30 ffff0000081aa024 0000000000000001
0000000000001000
[ 0.000000] 3d00: ffff000008d53d30 ffff0000081aa034 0000000000000001
0000000000001000
[ 0.000000] 3d20: 00000017fbfcff00 0000000000000004 ffff000008d53d90
ffff0000081aa2c8
[ 0.000000] 3d40: 00000017fbfcff00 0000000000001000 0000000000000000
0000000000000000
[ 0.000000] 3d60: ffff000008ca7328 0000000000000001 0000000000000040
0000000000000040
[ 0.000000] 3d80: 000000000000003f 0000000000000000 0000000000000000
0000000000000000
[ 0.000000] 3da0: ffff8017fbfd0f00 0000000000000000 0000000000000004
00000017fbffff00
[ 0.000000] 3dc0: 0000000000000069 0000000000000000 0000000000000004
0000001400000000
[ 0.000000] 3de0: 000000000000000b 000000000000001b
[ 0.000000] [<ffff000008c65af0>] pcpu_embed_first_chunk+0x464/0x754
[ 0.000000] [<ffff000008c5616c>] setup_per_cpu_areas+0x3c/0xcc
[ 0.000000] [<ffff000008c508d4>] start_kernel+0x10c/0x398
[ 0.000000] [<ffff000008c501d8>] __primary_switched+0x5c/0x64
[ 0.000000] Code: 0b000318 17ffffd8 6b17031f 54000080 (d4210000)
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill
the idle task!
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH v2] arm64: kernel: numa: fix ACPI boot cpu numa node mapping
2016-10-18 8:39 ` Hanjun Guo
@ 2016-10-19 2:51 ` Leizhen (ThunderTown)
0 siblings, 0 replies; 3+ messages in thread
From: Leizhen (ThunderTown) @ 2016-10-19 2:51 UTC (permalink / raw)
To: linux-arm-kernel
On 2016/10/18 16:39, Hanjun Guo wrote:
> On 2016/10/17 22:56, Lorenzo Pieralisi wrote:
>> Commit 7ba5f605f3a0 ("arm64/numa: remove the limitation that cpu0 must
>> bind to node0") removed the numa cpu<->node mapping restriction whereby
>> logical cpu 0 always corresponds to numa node 0; removing the
>> restriction was correct, in that it does not really exist in practice
>> but the commit only updated the early mapping of logical cpu 0 to its
>> real numa node for the DT boot path, missing the ACPI one, leading to
>> boot failures on ACPI systems owing to missing cpu<->node map for
>> logical cpu 0.
>>
>> Fix the issue by updating the ACPI boot path with code that carries out
>> the early cpu<->node mapping also for the boot cpu (ie cpu 0), mirroring
>> what is currently done in the DT boot path.
>>
>> Fixes: 7ba5f605f3a0 ("arm64/numa: remove the limitation that cpu0 must bind to node0")
>> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
>> Tested-by: Laszlo Ersek <lersek@redhat.com>
>> Reported-by: Laszlo Ersek <lersek@redhat.com>
>> Cc: Will Deacon <will.deacon@arm.com>
>> Cc: Laszlo Ersek <lersek@redhat.com>
>> Cc: Hanjun Guo <hanjun.guo@linaro.org>
>
> Thanks for the quick response and fix,
>
> Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
>
> By the way, I got another boot failure [1] when we have multi
> NUMA nodes system with some memory-less nodes (only one node
> have memory), we are looking into it now, this patch needs
> to be merged first.
You should apply my numa MEMORYLESS patches first, because the two patches have not been upstreamed yet.
I just tested it base on 4.9-rc1 for dt numa, it worked well. I will connect you to check what's wrong on ACPI numa.
>
> Thanks
> Hanjun
>
> [1]: boot failure log:
> [ 0.000000] NUMA: Adding memblock [0x0 - 0x3fffffff] on node 0
> [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x3fffffff]
> [ 0.000000] NUMA: Adding memblock [0x1400000000 - 0x17ffffffff] on node 1
> [ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x1400000000-0x17ffffffff]
> [ 0.000000] NUMA: Adding memblock [0x1000000000 - 0x13ffffffff] on node 0
> [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x1000000000-0x13ffffffff]
> [ 0.000000] NUMA: Initmem setup node 0 [mem 0x00000000-0x13fbffffff]
> [ 0.000000] NUMA: NODE_DATA [mem 0x13fbffe500-0x13fbffffff]
> [ 0.000000] NUMA: Initmem setup node 1 [mem 0x1400000000-0x17fbffffff]
> [ 0.000000] NUMA: NODE_DATA [mem 0x17fbfec500-0x17fbfedfff]
> [ 0.000000] NUMA: Initmem setup node 2 [mem 0x00000000-0xffffffffffffffff]
> [ 0.000000] NUMA: NODE_DATA [mem 0x17fbfeaa00-0x17fbfec4ff]
> [ 0.000000] NUMA: NODE_DATA(2) on node 1
> [ 0.000000] NUMA: Initmem setup node 3 [mem 0x00000000-0xffffffffffffffff]
> [ 0.000000] NUMA: NODE_DATA [mem 0x17fbfe8f00-0x17fbfea9ff]
> [ 0.000000] NUMA: NODE_DATA(3) on node 1
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
> [ 0.000000] Normal [mem 0x0000000100000000-0x00000017fbffffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000024fff]
> [ 0.000000] node 0: [mem 0x0000000000026000-0x00000000319dffff]
> [ 0.000000] node 0: [mem 0x00000000319e0000-0x0000000031a4ffff]
> [ 0.000000] node 0: [mem 0x0000000031a50000-0x0000000031b2ffff]
> [ 0.000000] node 0: [mem 0x0000000031b30000-0x0000000031b3ffff]
> [ 0.000000] node 0: [mem 0x0000000031b40000-0x0000000039baffff]
> [ 0.000000] node 0: [mem 0x0000000039bb0000-0x000000003a143fff]
> [ 0.000000] node 0: [mem 0x000000003a144000-0x000000003f12ffff]
> [ 0.000000] node 0: [mem 0x000000003f130000-0x000000003f15ffff]
> [ 0.000000] node 0: [mem 0x000000003f160000-0x000000003fbfffff]
> [ 0.000000] node 0: [mem 0x0000001040000000-0x00000013fbffffff]
> [ 0.000000] node 1: [mem 0x0000001400000000-0x00000017fbffffff]
> [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000013fbffffff]
> [ 0.000000] Initmem setup node 1 [mem 0x0000001400000000-0x00000017fbffffff]
> [ 0.000000] Could not find start_pfn for node 2
> [ 0.000000] Initmem setup node 2 [mem 0x0000000000000000-0x0000000000000000]
> [ 0.000000] Could not find start_pfn for node 3
> [ 0.000000] Initmem setup node 3 [mem 0x0000000000000000-0x0000000000000000]
> [ 0.000000] psci: probing for conduit method from ACPI.
> [ 0.000000] ------------[ cut here ]------------
> [ 0.000000] kernel BUG at mm/percpu.c:1916!
> [ 0.000000] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
> [ 0.000000] Modules linked in:
> [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.0-rc1-00083-g3dd62e5 #680
> [ 0.000000] Hardware name: Hisilicon Hi1616 Evaluation Board (DT)
> [ 0.000000] task: ffff000008d5e980 task.stack: ffff000008d50000
> [ 0.000000] PC is at pcpu_embed_first_chunk+0x464/0x754
> [ 0.000000] LR is at pcpu_embed_first_chunk+0x3f8/0x754
> [ 0.000000] pc : [<ffff000008c65af0>] lr : [<ffff000008c65a84>] pstate: 200000c5
> [ 0.000000] sp : ffff000008d53e90
> [ 0.000000] x29: ffff000008d53e90 [ 0.000000] x28: 0000000000000000
> [ 0.000000]
> [ 0.000000] x27: ffff000008d55e50 [ 0.000000] x26: 0000000000000042
> [ 0.000000]
> [ 0.000000] x25: ffff000008d55d28 [ 0.000000] x24: 0000000000000046
> [ 0.000000]
> [ 0.000000] x23: 0000000000000040 [ 0.000000] x22: ffff8017fbfcff00
> [ 0.000000]
> [ 0.000000] x21: ffff000008ca6e20 [ 0.000000] x20: ffff8017fbfd0518
> [ 0.000000]
> [ 0.000000] x19: 0000000000000042 [ 0.000000] x18: ffff000008e3fb60
> [ 0.000000]
> [ 0.000000] x17: 000000000000001b [ 0.000000] x16: 000000000000000b
> [ 0.000000]
> [ 0.000000] x15: 0000001400000000 [ 0.000000] x14: 0000000000000004
> [ 0.000000]
> [ 0.000000] x13: 0000000000000000 [ 0.000000] x12: 0000000000000069
> [ 0.000000]
> [ 0.000000] x11: 00000017fbffff00 [ 0.000000] x10: 0000000000000004
> [ 0.000000]
> [ 0.000000] x9 : 0000000000000000 [ 0.000000] x8 : ffff8017fbfd0f00
> [ 0.000000]
> [ 0.000000] x7 : 0000000000000000 [ 0.000000] x6 : 0000000000000000
> [ 0.000000]
> [ 0.000000] x5 : 0000000000000000 [ 0.000000] x4 : 000000000000003f
> [ 0.000000]
> [ 0.000000] x3 : 0000000000000040 [ 0.000000] x2 : 0000000000000040
> [ 0.000000]
> [ 0.000000] x1 : 0000000000000001 [ 0.000000] x0 : ffff000008ca7328
> [ 0.000000]
> [ 0.000000]
> [ 0.000000] Process swapper (pid: 0, stack limit = 0xffff000008d50020)
> [ 0.000000] Stack: (0xffff000008d53e90 to 0xffff000008d54000)
> [ 0.000000] 3e80: ffff000008d53f60 ffff000008c5616c
> [ 0.000000] 3ea0: ffff000008ca5a08 ffff000008e2a000 ffff000008e2a000 ffff000008d55000
> [ 0.000000] 3ec0: ffff000008ca5a08 ffff8017fbfffe80 0000000000000168 000000003c96a518
> [ 0.000000] 3ee0: 000000003c971b98 0000000000c50018 ffff000008d53f60 ffff000008c56078
> [ 0.000000] 3f00: ffff000008d1f000 ffff000008d14000 0000000000007480 0000000000002000
> [ 0.000000] 3f20: ffff000008c560b0 0000000000001000 ffff000008d55e50 ffff000008d55d28
> [ 0.000000] 3f40: ffff000008ca6000 0000000000000040 0000000000000001 0000000000000040
> [ 0.000000] 3f60: ffff000008d53fa0 ffff000008c508d4 ffff000008ca5a08 ffff000008e2a000
> [ 0.000000] 3f80: ffff000008e2a000 ffff000008d55000 ffff000008ca5a08 ffff000008c508d0
> [ 0.000000] 3fa0: ffff000008d53ff0 ffff000008c501d8 000000003c94fa98 000000001e400000
> [ 0.000000] 3fc0: 000000001e400000 000000025497ba19 0000000000000000 000000003f198a08
> [ 0.000000] 3fe0: 0000000000000000 ffff000008ca5a08 0000000000000000 00000000008a325c
> [ 0.000000] Call trace:
> [ 0.000000] Exception stack(0xffff000008d53cc0 to 0xffff000008d53df0)
> [ 0.000000] 3cc0: 0000000000000042 0001000000000000 ffff000008d53e90 ffff000008c65af0
> [ 0.000000] 3ce0: ffff000008d53d30 ffff0000081aa024 0000000000000001 0000000000001000
> [ 0.000000] 3d00: ffff000008d53d30 ffff0000081aa034 0000000000000001 0000000000001000
> [ 0.000000] 3d20: 00000017fbfcff00 0000000000000004 ffff000008d53d90 ffff0000081aa2c8
> [ 0.000000] 3d40: 00000017fbfcff00 0000000000001000 0000000000000000 0000000000000000
> [ 0.000000] 3d60: ffff000008ca7328 0000000000000001 0000000000000040 0000000000000040
> [ 0.000000] 3d80: 000000000000003f 0000000000000000 0000000000000000 0000000000000000
> [ 0.000000] 3da0: ffff8017fbfd0f00 0000000000000000 0000000000000004 00000017fbffff00
> [ 0.000000] 3dc0: 0000000000000069 0000000000000000 0000000000000004 0000001400000000
> [ 0.000000] 3de0: 000000000000000b 000000000000001b
> [ 0.000000] [<ffff000008c65af0>] pcpu_embed_first_chunk+0x464/0x754
> [ 0.000000] [<ffff000008c5616c>] setup_per_cpu_areas+0x3c/0xcc
> [ 0.000000] [<ffff000008c508d4>] start_kernel+0x10c/0x398
> [ 0.000000] [<ffff000008c501d8>] __primary_switched+0x5c/0x64
> [ 0.000000] Code: 0b000318 17ffffd8 6b17031f 54000080 (d4210000)
> [ 0.000000] ---[ end trace 0000000000000000 ]---
> [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
> [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
>
>
> .
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-10-19 2:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-10-17 14:56 [PATCH v2] arm64: kernel: numa: fix ACPI boot cpu numa node mapping Lorenzo Pieralisi
2016-10-18 8:39 ` Hanjun Guo
2016-10-19 2:51 ` Leizhen (ThunderTown)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).