From mboxrd@z Thu Jan 1 00:00:00 1970 From: heiko@sntech.de (Heiko =?ISO-8859-1?Q?St=FCbner?=) Date: Fri, 30 Jan 2015 00:43:11 +0100 Subject: [PATCH 2/2] ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards In-Reply-To: <3746086.qLJlieorB7@diego> References: <3746086.qLJlieorB7@diego> Message-ID: <7335328.BluQKWqSL0@diego> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Currently the hdmi driver is using one of the soc i2c busses for ddc probing and while documentation always specifies i2c5 as hdmi-i2c it could very well be any other bus as well. Therefore this is a property of the board and should be specified there. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-evb.dtsi | 1 + arch/arm/boot/dts/rk3288-firefly.dtsi | 1 + arch/arm/boot/dts/rk3288.dtsi | 1 - 3 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 6857730..86ede58 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -105,6 +105,7 @@ }; &hdmi { + ddc-i2c-bus = <&i2c5>; status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 6dcc5e9..e6f873a 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -180,6 +180,7 @@ }; &hdmi { + ddc-i2c-bus = <&i2c5>; status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 1e75a0f..1141850 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -646,7 +646,6 @@ compatible = "rockchip,rk3288-dw-hdmi"; reg = <0xff980000 0x20000>; reg-io-width = <4>; - ddc-i2c-bus = <&i2c5>; rockchip,grf = <&grf>; interrupts = ; clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; -- 2.1.1