From mboxrd@z Thu Jan 1 00:00:00 1970 From: narmstrong@baylibre.com (Neil Armstrong) Date: Wed, 24 Aug 2016 15:30:25 +0200 Subject: [PATCH 04/10] reset: meson: add driver Kconfig option In-Reply-To: <1472045342-7434-4-git-send-email-p.zabel@pengutronix.de> References: <1472045342-7434-1-git-send-email-p.zabel@pengutronix.de> <1472045342-7434-4-git-send-email-p.zabel@pengutronix.de> Message-ID: <736e8932-ccaf-2871-2633-a2960dcb6f3d@baylibre.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 08/24/2016 03:28 PM, Philipp Zabel wrote: > Visible only if COMPILE_TEST is enabled, this allows to include the > driver in build tests. > > Cc: Neil Armstrong > Signed-off-by: Philipp Zabel > --- > drivers/reset/Kconfig | 6 ++++++ > drivers/reset/Makefile | 2 +- > 2 files changed, 7 insertions(+), 1 deletion(-) > > diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig > index 8e33de2..fdf942d 100644 > --- a/drivers/reset/Kconfig > +++ b/drivers/reset/Kconfig > @@ -34,6 +34,12 @@ config RESET_LPC18XX > This enables the LPC18xx/43 reset driver that supports the reset > controllers on AR71xx SoCs. > > +config RESET_MESON > + bool "Meson Reset Driver" if COMPILE_TEST > + default ARCH_MESON > + help > + This enables the reset driver for Amlogic Meson SoCs. > + > config RESET_OXNAS > bool > > diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile > index 25aa05a..1408cba 100644 > --- a/drivers/reset/Makefile > +++ b/drivers/reset/Makefile > @@ -1,7 +1,6 @@ > obj-y += core.o > obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o > obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o > -obj-$(CONFIG_ARCH_MESON) += reset-meson.o > obj-$(CONFIG_ARCH_STM32) += reset-stm32.o > obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o > obj-$(CONFIG_ARCH_STI) += sti/ > @@ -10,6 +9,7 @@ obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o > obj-$(CONFIG_RESET_ATH79) += reset-ath79.o > obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o > obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o > +obj-$(CONFIG_RESET_MESON) += reset-meson.o > obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o > obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o > obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o > Acked-by: Neil Armstrong