[PATCH v2 0/1] enable cache for mt8186 SCP

[PATCH v2 0/1] enable cache for mt8186 SCP

[Allen-KH Cheng]

This patch is based on kernel/git/next/linux-next.git/#master and for
enableing cache in SCP.

In mt8186 SCP, it provides parts of these features vedio encode/decode,
camera, and CrOS EC host command. We don't have enough SRAM to support
too many text segments, heap and stack, so SCP will use DRAM as execution
space.·

The DRAM power and latency is much larger than SRAM. cache is used to
mitigate the negative effects for performace. Also it's designed in SCP
bus architecture and does not affect implemenations where the application
processor is using caches.

We reserve 0x3C000 <-> 0x40000 in SRAM(SCP) to support cache and set
I-cache and D-cache size before loading SCP FW. If there isn't no this
patch, SCP still works with DRAM and SRAM.

This driver was tested on mt8186 with below firmware

This driver was tested on mt8186 with below firmware
https://lore.kernel.org/linux-firmware/10ed0b2a78baa88f7fd1d466036c98de2f6d8e29.camel@mediatek.com/T/#t

changes since v1:
 - rebase to linux-next
 - add more information in commit message

Allen-KH Cheng (1):
  remoteproc: mediatek: enable cache for mt8186 SCP

 drivers/remoteproc/mtk_scp.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 1/1] remoteproc: mediatek: enable cache for mt8186 SCP

[Allen-KH Cheng]

This patch is for enableing cache in SCP. There is not enough space
on the SRAM of SCP. We need to run programs in DRAM. The DRAM power
and latency is much larger than SRAM, so cache is used to mitigate
the negative effects for performance. we set SCP registers for cache
size before loading SCP FW. (8KB+8KB) and also adjust ipi_buf_offset
in SRAM from 0x7bdb0 to 0x3BDB0 for enableing cache.

This patch was tested on MediaTek mt8186.

Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
---
 drivers/remoteproc/mtk_scp.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
index 47b2a40e1b4a..5b2ad789e720 100644
--- a/drivers/remoteproc/mtk_scp.c
+++ b/drivers/remoteproc/mtk_scp.c
@@ -401,6 +401,14 @@ static int mt8186_scp_before_load(struct mtk_scp *scp)
 	writel(0x0, scp->reg_base + MT8186_SCP_L1_SRAM_PD_P1);
 	writel(0x0, scp->reg_base + MT8186_SCP_L1_SRAM_PD_p2);
 
+	/*
+	 * Set I-cache and D-cache size before loading SCP FW.
+	 * SCP SRAM logical address may change when cache size setting differs.
+	 */
+	writel(MT8183_SCP_CACHE_CON_WAYEN | MT8183_SCP_CACHESIZE_8KB,
+	       scp->reg_base + MT8183_SCP_CACHE_CON);
+	writel(MT8183_SCP_CACHESIZE_8KB, scp->reg_base + MT8183_SCP_DCACHE_CON);
+
 	return 0;
 }
 
@@ -943,7 +951,7 @@ static const struct mtk_scp_of_data mt8186_of_data = {
 	.scp_da_to_va = mt8183_scp_da_to_va,
 	.host_to_scp_reg = MT8183_HOST_TO_SCP,
 	.host_to_scp_int_bit = MT8183_HOST_IPC_INT_BIT,
-	.ipi_buf_offset = 0x7bdb0,
+	.ipi_buf_offset = 0x3bdb0,
 };
 
 static const struct mtk_scp_of_data mt8192_of_data = {
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/1] remoteproc: mediatek: enable cache for mt8186 SCP

[Tinghan Shen]

On Fri, 2022-07-01 at 20:12 +0800, Allen-KH Cheng wrote:
> This patch is for enableing cache in SCP. There is not enough space
> on the SRAM of SCP. We need to run programs in DRAM. The DRAM power
> and latency is much larger than SRAM, so cache is used to mitigate
> the negative effects for performance. we set SCP registers for cache
> size before loading SCP FW. (8KB+8KB) and also adjust ipi_buf_offset
> in SRAM from 0x7bdb0 to 0x3BDB0 for enableing cache.
> 
> This patch was tested on MediaTek mt8186.
> 
> Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
> 

Test scp boot and scp ipc ok.

Tested-by: TingHan Shen <tinghan.shen@mediatek.com>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/1] remoteproc: mediatek: enable cache for mt8186 SCP

[AngeloGioacchino Del Regno]

Il 01/07/22 14:12, Allen-KH Cheng ha scritto:
> This patch is for enableing cache in SCP. There is not enough space
> on the SRAM of SCP. We need to run programs in DRAM. The DRAM power
> and latency is much larger than SRAM, so cache is used to mitigate
> the negative effects for performance. we set SCP registers for cache
> size before loading SCP FW. (8KB+8KB) and also adjust ipi_buf_offset
> in SRAM from 0x7bdb0 to 0x3BDB0 for enableing cache.
> 
> This patch was tested on MediaTek mt8186.
> 
> Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/1] remoteproc: mediatek: enable cache for mt8186 SCP

[Mathieu Poirier]

On Fri, Jul 01, 2022 at 08:12:29PM +0800, Allen-KH Cheng wrote:
> This patch is for enableing cache in SCP. There is not enough space
> on the SRAM of SCP. We need to run programs in DRAM. The DRAM power
> and latency is much larger than SRAM, so cache is used to mitigate
> the negative effects for performance. we set SCP registers for cache

s/we/We

> size before loading SCP FW. (8KB+8KB) and also adjust ipi_buf_offset
> in SRAM from 0x7bdb0 to 0x3BDB0 for enableing cache.

s/0x3BDB0/0x3bdb0

s/enableing/enabling

> 
> This patch was tested on MediaTek mt8186.
> 

If we keep the above statement it will be in the kernel's changelog for ever.
Comments such as this one are usually found in the cover letter or between "---"
lines after the SoB.

> Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
> ---
>  drivers/remoteproc/mtk_scp.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
> index 47b2a40e1b4a..5b2ad789e720 100644
> --- a/drivers/remoteproc/mtk_scp.c
> +++ b/drivers/remoteproc/mtk_scp.c
> @@ -401,6 +401,14 @@ static int mt8186_scp_before_load(struct mtk_scp *scp)
>  	writel(0x0, scp->reg_base + MT8186_SCP_L1_SRAM_PD_P1);
>  	writel(0x0, scp->reg_base + MT8186_SCP_L1_SRAM_PD_p2);
>  
> +	/*
> +	 * Set I-cache and D-cache size before loading SCP FW.
> +	 * SCP SRAM logical address may change when cache size setting differs.
> +	 */
> +	writel(MT8183_SCP_CACHE_CON_WAYEN | MT8183_SCP_CACHESIZE_8KB,
> +	       scp->reg_base + MT8183_SCP_CACHE_CON);
> +	writel(MT8183_SCP_CACHESIZE_8KB, scp->reg_base + MT8183_SCP_DCACHE_CON);
> +
>  	return 0;
>  }
>  
> @@ -943,7 +951,7 @@ static const struct mtk_scp_of_data mt8186_of_data = {
>  	.scp_da_to_va = mt8183_scp_da_to_va,
>  	.host_to_scp_reg = MT8183_HOST_TO_SCP,
>  	.host_to_scp_int_bit = MT8183_HOST_IPC_INT_BIT,
> -	.ipi_buf_offset = 0x7bdb0,
> +	.ipi_buf_offset = 0x3bdb0,
>  };

I have made the above corrections and applied this patch.

Thanks,
Mathieu

>  
>  static const struct mtk_scp_of_data mt8192_of_data = {
> -- 
> 2.18.0
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel