From mboxrd@z Thu Jan 1 00:00:00 1970 From: laurent.pinchart@ideasonboard.com (Laurent Pinchart) Date: Wed, 07 Dec 2016 17:17:45 +0200 Subject: [PATCH v5 4/5] [media] dt-bindings: add TI VPIF documentation In-Reply-To: <20161207050826.23174-5-khilman@baylibre.com> References: <20161207050826.23174-1-khilman@baylibre.com> <20161207050826.23174-5-khilman@baylibre.com> Message-ID: <7493249.S63p6GTauu@avalon> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Kevin, Thank you for the patch. On Tuesday 06 Dec 2016 21:08:25 Kevin Hilman wrote: > Acked-by: Rob Herring > Signed-off-by: Kevin Hilman > --- > .../devicetree/bindings/media/ti,da850-vpif.txt | 67 +++++++++++++++++++ > 1 file changed, 67 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/media/ti,da850-vpif.txt > > diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt > b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt new file mode > 100644 > index 000000000000..fa06dfdb6898 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt > @@ -0,0 +1,67 @@ > +Texas Instruments VPIF > +---------------------- > + > +The TI Video Port InterFace (VPIF) is the primary component for video > +capture and display on the DA850/AM18x family of TI DaVinci/Sitara > +SoCs. > + > +TI Document reference: SPRUH82C, Chapter 35 > +http://www.ti.com/lit/pdf/spruh82 > + > +Required properties: > +- compatible: must be "ti,da850-vpif" > +- reg: physical base address and length of the registers set for the > device; > +- interrupts: should contain IRQ line for the VPIF > + > +Video Capture: > + > +VPIF has a 16-bit parallel bus input, supporting 2 8-bit channels or a > +single 16-bit channel. It should contain at least one port child node > +with child 'endpoint' node. Please refer to the bindings defined in > +Documentation/devicetree/bindings/media/video-interfaces.txt. You might want to clarify how endpoints are use in the two cases. Apart from that, Reviewed-by: Laurent Pinchart > +Example using 2 8-bit input channels, one of which is connected to an > +I2C-connected TVP5147 decoder: > + > + vpif: vpif at 217000 { > + compatible = "ti,da850-vpif"; > + reg = <0x217000 0x1000>; > + interrupts = <92>; > + > + port { > + vpif_ch0: endpoint at 0 { > + reg = <0>; > + bus-width = <8>; > + remote-endpoint = <&composite>; > + }; > + > + vpif_ch1: endpoint at 1 { > + reg = <1>; > + bus-width = <8>; > + data-shift = <8>; > + }; > + }; > + }; > + > +[ ... ] > + > +&i2c0 { > + > + tvp5147 at 5d { > + compatible = "ti,tvp5147"; > + reg = <0x5d>; > + status = "okay"; > + > + port { > + composite: endpoint { > + hsync-active = <1>; > + vsync-active = <1>; > + pclk-sample = <0>; > + > + /* VPIF channel 0 (lower 8-bits) */ > + remote-endpoint = <&vpif_ch0>; > + bus-width = <8>; > + }; > + }; > + }; > +}; -- Regards, Laurent Pinchart