From mboxrd@z Thu Jan 1 00:00:00 1970 From: dhdang@apm.com (Duc Dang) Date: Fri, 7 Aug 2015 20:18:48 -0700 Subject: [PATCH v5 1/2] usb: make xhci platform driver use 64 bit or 32 bit DMA In-Reply-To: References: Message-ID: <74fe0b014334a5ac1db90dec46bdbf6c30c07895.1439002338.git.dhdang@apm.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The xhci platform driver needs to work on systems that either only support 64-bit DMA or only support 32-bit DMA. Attempt to set a coherent dma mask for 64-bit DMA, and attempt again with 32-bit DMA if that fails. [dhdang: Regenerate the patch over 4.2-rc5] Signed-off-by: Mark Langsdorf Tested-by: Mark Salter Signed-off-by: Duc Dang --- Changes from v4: None Changes from v3: Re-generate the patch over 4.2-rc5 No code change. Changes from v2: None Changes from v1: Consolidated to use dma_set_mask_and_coherent Got rid of the check against sizeof(dma_addr_t) drivers/usb/host/xhci-plat.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 890ad9d..5d03f8b 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -93,14 +93,14 @@ static int xhci_plat_probe(struct platform_device *pdev) if (irq < 0) return -ENODEV; - /* Initialize dma_mask and coherent_dma_mask to 32-bits */ - ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); - if (ret) - return ret; - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - else - dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + /* Try setting the coherent_dma_mask to 64 bits, then try 32 bits */ + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); + if (ret) { + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret; + } + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) -- 1.9.1