Re: [PATCH v6 0/4] Add BigTreeTech CB1 SoM & Boards

["Jernej Škrabec" <jernej.skrabec@gmail.com>]

Dne torek, 12. september 2023 ob 13:20:46 CEST je Martin Botka napisal(a):
> Hello,
> This series adds a vendor prefix for BigTreeTech and adds BigTreeTech CB1,
> Manta board and BigTreeTech Pi.
> 
> CB1 is just an SoM thats based on AllWinner H616.
> BigTreeTech Manta boards are expander boards for CB1 and BigTreeTech Pi
> is an CB1 in Rpi style with few additional things like IR receiver and fan port
> on GPIO.
> 
> This work started before I was hired by BigTreeTech and thus majority of the
> patches are from SoMainline email and few are from my work email.
> 
> This series depends on commit https://lkml.org/lkml/2023/8/28/1073
> and https://lkml.org/lkml/2023/8/2/801
> 
> Cheers,
> Martin

Applied, thanks!

Best regards,
Jernej

> 
> Signed-off-by: Martin Botka <martin.botka@somainline.org>
> ---
> Changes in v6:
> - Remove SPI node from BTT Pi (To be used via overlays)
> - Rebase on top of 6.6-rc1
> 
> Changes in v5:
> - Removal of wifi node comments that were obvious from properties
> 
> Changes in v4:
> - Extend the range of vcc-dram to 1.5V (Max of 1.35V caused issues with booting up)
> 
> Changes in v3:
> - Add missed semicolons
> - Move model string from dtsi to board dts
> - Add cb1 compatible to manta
> - Remove extra empty lines
> - Add pinctrl for SPI0
> 
> Changes in v2:
> - Fix alphabetical order in vendor prefixes
> - Remove CB1 SoM from bindings (Its not standalone)
> - Fixed whitespace errors
> - Move UART into carrier boards and BTT Pi
> - Remove usb1-vbus regulator
> - Fix ranges and naming of AXP313A rails
> - Add comment why broken-cb in mmc0 is needed
> - Rename sdio_wifi to wifi
> - Add model string to BTT Pi
> - Enable IR receiver for BTT Pi
> - Enable SPI0
> 
> ---
> Martin Botka (4):
>       dt-bindings: vendor-prefixes: Add BigTreeTech
>       dt-bindings: arm: sunxi: Add BigTreeTech boards
>       arm64: dts: allwinner: h616: Add BigTreeTech CB1 SoM & boards support
>       arm64: dts: allwinner: h616: Add BigTreeTech Pi support
> 
>  Documentation/devicetree/bindings/arm/sunxi.yaml   |  11 ++
>  .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
>  arch/arm64/boot/dts/allwinner/Makefile             |   2 +
>  .../sun50i-h616-bigtreetech-cb1-manta.dts          |  35 ++++++
>  .../dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi | 138 +++++++++++++++++++++
>  .../dts/allwinner/sun50i-h616-bigtreetech-pi.dts   |  63 ++++++++++
>  6 files changed, 251 insertions(+)
> ---
> base-commit: cc19c78b3b3f1af285182dd800a3def22227f9a2
> change-id: 20230814-b4-cb1-4b18801ecf6e
> 
> Best regards,
> 





_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel