From: arnd@arndb.de (Arnd Bergmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH] ARM64: PCI: inherit root controller's dma-coherent
Date: Fri, 05 Dec 2014 17:05:29 +0100 [thread overview]
Message-ID: <7705416.b49xSXIHeP@wuerfel> (raw)
In-Reply-To: <5481B283.6030407@ti.com>
On Friday 05 December 2014 15:26:27 Grygorii Strashko wrote:
> ---
> From 5e078b1ba148aa280181c4f695e567875a0f4ae9 Mon Sep 17 00:00:00 2001
> From: Grygorii Strashko <grygorii.strashko@ti.com>
> Date: Fri, 28 Feb 2014 19:11:39 +0200
> Subject: [RFC PATCH] common: dma-mapping: introduce dma_init_dev_from_parent() helper
>
> Now, in Kernel, Parent device's DMA configuration has to by applied
> to the child as is, to enable DMA support for this device. Usually, this
> is happened in places where child device is manually instantiated by
> Parent device device using Platform APIs
> (see drivers/usb/dwc3/host.c or drivers/pci/probe.c:pci_device_add()
> for example).
>
> The DMA configuration is represented in Device data structure was
> extended recently (dma_pfn_offset was added) and going to extended
> in future to support IOMMU. Therefore, the code used by drivers to
> copy DMA configuration from parent to child device isn't working
> properly, for example:
> (drivers/usb/dwc3/host.c)
> dma_set_coherent_mask(&xhci->dev, dwc->dev->coherent_dma_mask);
>
> xhci->dev.parent = dwc->dev;
> xhci->dev.dma_mask = dwc->dev->dma_mask;
> xhci->dev.dma_parms = dwc->dev->dma_parms;
> above code will miss to copy dma_pfn_offset.
I'm not too thrilled about this implementation either. It immediately
breaks as soon as we have IOMMU support, as the IOMMU configuration
is by definition device dependent, and you have introduced a few bugs
by copying the pointers to dma_mask and dma_parms.
> Hence, intoroduce common dma_init_dev_from_parent() helper to
> initialize device's DMA parameters using from parent device's configuration,
> use __weak to allow arches to overwrite it if needed.
>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
> ---
> drivers/base/dma-mapping.c | 25 +++++++++++++++++++++++++
> include/linux/dma-mapping.h | 3 +++
> 2 files changed, 28 insertions(+)
>
> diff --git a/drivers/base/dma-mapping.c b/drivers/base/dma-mapping.c
> index 9e8bbdd..4556698 100644
> --- a/drivers/base/dma-mapping.c
> +++ b/drivers/base/dma-mapping.c
> @@ -270,6 +270,31 @@ int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
> }
> EXPORT_SYMBOL(dma_common_mmap);
>
> +/*
> + * Initialize device's DMA parameters using parent device
> + * @dev: Device to be configured
> + * @parent: Pointer on parent device to get DMA configuration from
> + *
> + * parent can be NULL - then DMA configuration will be teken from dev->parent.
> + */
> +void __weak dma_init_dev_from_parent(struct device *dev, struct device *parent)
> +{
Please let's try to avoid weak functions
> + struct device *parent_dev = parent;
One of these two is not needed.
> + /* if parent is NULL assume, dev->parent is the one to use */
> + if (!parent_dev)
> + parent_dev = dev->parent;
> +
> + if (is_device_dma_capable(parent_dev)) {
> + dev->dma_mask = parent_dev->dma_mask;
This is always wrong: dev->dma_mask is a pointer!
> + dev->coherent_dma_mask = parent_dev->coherent_dma_mask;
What if someone has already set a mask that is greater than 32-bit?
> + dev->dma_parms = parent_dev->dma_parms;
same problem here.
> + dev->dma_pfn_offset = parent_dev->dma_pfn_offset;
> + set_dma_ops(dev, get_dma_ops(parent_dev));
> + }
> +}
> +EXPORT_SYMBOL(dma_init_dev_from_parent);
Arnd
next prev parent reply other threads:[~2014-12-05 16:05 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-27 5:41 [RFC PATCH] ARM64: PCI: inherit root controller's dma-coherent Ming Lei
2014-11-27 7:39 ` Jon Masters
2014-11-27 9:05 ` Arnd Bergmann
2014-11-27 11:36 ` Catalin Marinas
2014-11-27 11:53 ` Arnd Bergmann
2014-11-27 9:03 ` Arnd Bergmann
2014-11-27 10:14 ` Ming Lei
2014-11-27 10:22 ` Will Deacon
2014-12-04 3:40 ` Ming Lei
2014-12-05 13:26 ` Grygorii Strashko
2014-12-05 16:05 ` Arnd Bergmann [this message]
2014-12-09 2:53 ` Ming Lei
2014-12-10 16:06 ` Arnd Bergmann
2014-12-10 16:23 ` Robin Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7705416.b49xSXIHeP@wuerfel \
--to=arnd@arndb.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox