From mboxrd@z Thu Jan 1 00:00:00 1970 From: haojian.zhuang@gmail.com (Haojian Zhuang) Date: Wed, 30 Dec 2009 04:05:48 -0500 Subject: [PATCH 2/2] pxa: enable L2 if present in XSC3 In-Reply-To: References: <771cded00912292328j459b5218r64703d59165fe98f@mail.gmail.com> Message-ID: <771cded00912300105u1a31feb6t6465d47cd21aa900@mail.gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Dec 30, 2009 at 3:50 AM, Eric Miao wrote: >> >> Check whether L2 is present or not in XSC3. If it's present, enable L2 >> immediately. >> >> Disabling L2 after L2 is enabled that would result in unpredicatable behavior >> of XSC3 processor. >> > > You may want to enclose this with #ifdef CONFIG_CACHE_XSC3L2 .. #endif > at least, to allow L2 to remain disabled even if L2 is present. > Updated this patch. Thanks Haojian -------------- next part -------------- A non-text attachment was scrubbed... Name: 0002--ARM-pxa-enable-L2-if-present-in-XSC3.patch Type: text/x-patch Size: 1108 bytes Desc: not available URL: