linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: rnayak@ti.com (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] omap2+: Initialize omap_irq_base for entry-macro.Sfrom platform code
Date: Mon, 13 Dec 2010 17:27:08 +0530	[thread overview]
Message-ID: <774b6f8f3fa4cae7210bfdb317c68e12@mail.gmail.com> (raw)
In-Reply-To: <20101208014921.GM17435@atomide.com>

Hi Tony,

> -----Original Message-----
> From: linux-arm-kernel-bounces at lists.infradead.org
[mailto:linux-arm-kernel-bounces at lists.infradead.org] On Behalf
> Of Tony Lindgren
> Sent: Wednesday, December 08, 2010 7:19 AM
> To: Nicolas Pitre
> Cc: linux-omap at vger.kernel.org; linux-arm-kernel at lists.infradead.org
> Subject: [PATCH 3/3] omap2+: Initialize omap_irq_base for
entry-macro.Sfrom platform code
>
> This way we can use the generic omap SoC detection code instead.
>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
>
> diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S
b/arch/arm/mach-omap2/include/mach/entry-macro.S
> index 06e64e1..6032941 100644
> --- a/arch/arm/mach-omap2/include/mach/entry-macro.S
> +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
> @@ -38,41 +38,27 @@
>   */
>
>  #ifdef MULTI_OMAP2
> +
> +/*
> + * We use __glue to avoid errors with multiple definitions of
> + * .globl omap_irq_base as it's included from entry-armv.S but not
> + * from entry-common.S.
> + */
> +#ifdef __glue
>  		.pushsection .data
> -omap_irq_base:	.word	0
> +		.globl	omap_irq_base
> +omap_irq_base:
> +		.word	0
>  		.popsection
> +#endif
>
> -		/* Configure the interrupt base on the first interrupt */
> +		/*
> +		 * Configure the interrupt base on the first interrupt.
> +		 * See also omap_irq_base_init for setting omap_irq_base.
> +		 */
>  		.macro  get_irqnr_preamble, base, tmp
> -9:
>  		ldr	\base, =omap_irq_base	@ irq base address
>  		ldr	\base, [\base, #0]	@ irq base value
> -		cmp	\base, #0		@ already configured?
> -		bne	9997f			@ nothing to do
> -
> -		mrc	p15, 0, \tmp, c0, c0, 0	@ get processor revision
> -		and	\tmp, \tmp, #0x000f0000	@ only check architecture
> -		cmp	\tmp, #0x00070000	@ is v6?
> -		beq	2400f			@ found v6 so it's
omap24xx
> -		mrc	p15, 0, \tmp, c0, c0, 0	@ get processor revision
> -		and	\tmp, \tmp, #0x000000f0	@ check cortex 8 or 9
> -		cmp	\tmp, #0x00000080	@ cortex A-8?
> -		beq	3400f			@ found A-8 so it's
omap34xx
> -		cmp	\tmp, #0x00000090	@ cortex A-9?
> -		beq	4400f			@ found A-9 so it's
omap44xx
> -2400:		ldr	\base, =OMAP2_IRQ_BASE
> -		ldr	\tmp, =omap_irq_base
> -		str	\base, [\tmp, #0]
> -		b	9b
> -3400:		ldr	\base, =OMAP3_IRQ_BASE
> -		ldr	\tmp, =omap_irq_base
> -		str	\base, [\tmp, #0]
> -		b	9b
> -4400:		ldr	\base, =OMAP4_IRQ_BASE
> -		ldr	\tmp, =omap_irq_base
> -		str	\base, [\tmp, #0]
> -		b	9b
> -9997:
>  		.endm
>
>  		/* Check the pending interrupts. Note that base already
set */
> diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
> index 40562dd..3d18349 100644
> --- a/arch/arm/mach-omap2/io.c
> +++ b/arch/arm/mach-omap2/io.c
> @@ -46,6 +46,7 @@
>  #include "clockdomains.h"
>
>  #include <plat/omap_hwmod.h>
> +#include <plat/multi.h>
>
>  /*
>   * The machine specific code may provide the extra mapping besides the
> @@ -311,6 +312,25 @@ static int __init _omap2_init_reprogram_sdrc(void)
>  	return v;
>  }
>
> +/*
> + * Initialize asm_irq_base for entry-macro.S
> + */
> +static inline void omap_irq_base_init(void)
> +{
> +	extern void __iomem *omap_irq_base;
> +
> +#ifdef MULTI_OMAP2
> +	if (cpu_is_omap242x())

Looks like this should be a cpu_is_omap24xx(). The
current master is broken on a 2430sdp and a git-bisect
pointed me to this patch.

Regards,
Rajendra

> +		omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE);
> +	else if (cpu_is_omap34xx())
> +		omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE);
> +	else if (cpu_is_omap44xx())
> +		omap_irq_base =
OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE);
> +	else
> +		pr_err("Could not initialize omap_irq_base\n");
> +#endif
> +}
> +
>  void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
>  				 struct omap_sdrc_params *sdrc_cs1)
>  {
> @@ -352,4 +372,6 @@ void __init omap2_init_common_hw(struct
omap_sdrc_params *sdrc_cs0,
>  		_omap2_init_reprogram_sdrc();
>  	}
>  	gpmc_init();
> +
> +	omap_irq_base_init();
>  }
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2010-12-13 11:57 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-04  0:20 [PATCH 0/4] Patches to make multi-soc handling in entry-armv.S easier Tony Lindgren
2010-12-04  0:20 ` [PATCH 1/4] ARM: Add asm_irq_base and asm_irq_flags for entry-armv.S macros Tony Lindgren
2010-12-04  0:20 ` [PATCH 2/4] omap2+: Use asm_irq_base for entry-macro.S Tony Lindgren
2010-12-04  0:20 ` [PATCH 3/4] omap1: Use asm_irq_flags " Tony Lindgren
2010-12-04  0:20 ` [PATCH 4/4] omap1: Use get_irqnr_preamble Tony Lindgren
2010-12-04  5:49 ` [PATCH 0/4] Patches to make multi-soc handling in entry-armv.S easier Nicolas Pitre
2010-12-04 18:05   ` Tony Lindgren
2010-12-05  2:36     ` Nicolas Pitre
2010-12-05  3:10       ` Tony Lindgren
2010-12-08  1:45         ` Tony Lindgren
2010-12-08  1:47           ` [PATCH 1/3] omap1: Use asm_irq_flags for entry-macro.S Tony Lindgren
2010-12-10 16:06             ` Janusz Krzysztofik
2010-12-10 17:44               ` Tony Lindgren
2010-12-08  1:48           ` [PATCH 2/3] omap1: Use get_irqnr_preamble Tony Lindgren
2010-12-08  1:49           ` [PATCH 3/3] omap2+: Initialize omap_irq_base for entry-macro.S from platform code Tony Lindgren
2010-12-13 11:57             ` Rajendra Nayak [this message]
2010-12-15  3:25               ` [PATCH 3/3] omap2+: Initialize omap_irq_base for entry-macro.Sfrom " Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=774b6f8f3fa4cae7210bfdb317c68e12@mail.gmail.com \
    --to=rnayak@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).