Re: [RFC][PATCH] Revert "drm/panel-simple: drop use of data-mapping property"

[Max Krummenacher <max.oss.09@gmail.com>]

Hi

Am Mittwoch, den 09.02.2022, 00:52 +0100 schrieb Marek Vasut:
> On 2/8/22 22:27, Christoph Niedermaier wrote:
> > From: Laurent Pinchart [mailto:laurent.pinchart@ideasonboard.com]
> > Sent: Thursday, February 3, 2022 12:46 AM
> > > Hi Christoph,
> > > 
> > 
> > Hi Laurent,
> > 
> > > On Tue, Feb 01, 2022 at 12:07:17PM +0100, Christoph Niedermaier wrote:
> > > > Without the data-mapping devicetree property my display won't
> > > > work properly. It is flickering, because the bus flags won't
> > > > be assigned without a defined bus format by the imx parallel
> > > > display driver. There was a discussion about the removal [1]
> > > > and an agreement that a better solution is needed, but it is
> > > > missing so far. So what would be the better approach?
> > > > 
> > > > [1] https://patchwork.freedesktop.org/patch/357659/?series=74705&rev=1
> > > > 
> > > > This reverts commit d021d751c14752a0266865700f6f212fab40a18c.
> > > > 
> > > > Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
> > > > Cc: Marek Vasut <marex@denx.de>
> > > > Cc: Sam Ravnborg <sam@ravnborg.org>
> > > > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > > > Cc: Maxime Ripard <mripard@kernel.org>
> > > > Cc: Philipp Zabel <p.zabel@pengutronix.de>
> > > > Cc: David Airlie <airlied@linux.ie>
> > > > Cc: Daniel Vetter <daniel@ffwll.ch>
> > > > Cc: Shawn Guo <shawnguo@kernel.org>
> > > > Cc: Sascha Hauer <s.hauer@pengutronix.de>
> > > > Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> > > > Cc: Fabio Estevam <festevam@gmail.com>
> > > > Cc: NXP Linux Team <linux-imx@nxp.com>
> > > > Cc: linux-arm-kernel@lists.infradead.org
> > > > To: dri-devel@lists.freedesktop.org
> > > > ---
> > > >   drivers/gpu/drm/panel/panel-simple.c | 11 +++++++++++
> > > >   1 file changed, 11 insertions(+)
> > > > 
> > > > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> > > > index 3c08f9827acf..2c683d94a3f3 100644
> > > > --- a/drivers/gpu/drm/panel/panel-simple.c
> > > > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > > > @@ -453,6 +453,7 @@ static int panel_dpi_probe(struct device *dev,
> > > >        struct panel_desc *desc;
> > > >        unsigned int bus_flags;
> > > >        struct videomode vm;
> > > > +     const char *mapping;
> > > >        int ret;
> > > > 
> > > >        np = dev->of_node;
> > > > @@ -477,6 +478,16 @@ static int panel_dpi_probe(struct device *dev,
> > > >        of_property_read_u32(np, "width-mm", &desc->size.width);
> > > >        of_property_read_u32(np, "height-mm", &desc->size.height);
> > > > 
> > > > +     of_property_read_string(np, "data-mapping", &mapping);
> > > > +     if (!strcmp(mapping, "rgb24"))
> > > > +             desc->bus_format = MEDIA_BUS_FMT_RGB888_1X24;
> > > > +     else if (!strcmp(mapping, "rgb565"))
> > > > +             desc->bus_format = MEDIA_BUS_FMT_RGB565_1X16;
> > > > +     else if (!strcmp(mapping, "bgr666"))
> > > > +             desc->bus_format = MEDIA_BUS_FMT_RGB666_1X18;
> > > > +     else if (!strcmp(mapping, "lvds666"))
> > > > +             desc->bus_format = MEDIA_BUS_FMT_RGB666_1X24_CPADHI;
> > > 
> > > You're right that there's an issue, but a revert isn't the right option.
> > > The commit you're reverting never made it in a stable release, because
> > > it was deemed to not be a good enough option.
> > > 
> > > First of all, any attempt to fix this should include an update to the DT
> > > binding. Second, as this is about DPI panels, the LVDS option should be
> > > dropped. Finally, I've shared some initial thoughts in [1], maybe you
> > > can reply to that e-mail to continue the discussion there ?
> > 
> > According to your thoughts in [1] you mean that the bus format should be
> > build out of the devicetree properties bus-width and data-shift. It would
> > be possible for evenly structured busses like RGB888_1X24 and RGB666_1X18,
> > but what about a bus like RGB565_1X16, where each color has different
> > bus width. Also the order of the colors should be defined to differ
> > between busses like RGB888_1X24 and GBR888_1X24.
> > Are there any ideas how can this be covered?
> 
> Maybe with props like these ?
> 
> channel-width -- width of each color channel
> channel-shift -- shift of each color channel
> channel-map -- mapping of each color channel
> 
> So for RGB888
> channel-width = <8 8 8>;
> channel-shift = <0 0 0>;
> channel-map = "RGB"; // or something ?
> 
> For BGR565 panel connected to RGB24 scanout
> channel-width = <5 6 5>;
> channel-shift = <3 2 3>;
> channel-map = "BGR"; // or something ?
> 
> For BGR565 panel connected to RGB565 scanout
> channel-width = <5 6 5>;
> channel-shift = <0 0 0>;
> channel-map = "BGR"; // or something ?
> 

To me this looks like it goes into the wrong direction.
The goal is to set bus_format to one of the
possible enum values.
Using such a generic approach it would be possible to request bus
formats for which no enum value is currently defined, i.e. the
BGR565 example does not have a matching bus_format in
media-bus-format.h.

What about keeping the solution which the revert would give.
Optionally with a changed property name s/data-mapping/bus-format/
and a changed list of allowed strings to better match between the
dt string and the enum name, i.e. s/"rgb24"/"RGB888_1X24"/.
This would allow to extend DT binding and
code to possible newly
required values like e.g. MEDIA_BUS_FMT_BGR888_1X24.

Alternatively one could use the bus-width and data-shift
properties and allow for (bus-width + data-shift) to be one
of 16, 18, 24 and assume RGB. I.e. one could only specify
MEDIA_BUS_FMT_RGB565_1X16, MEDIA_BUS_FMT_RGB666_1X18,
MEDIA_BUS_FMT_RGB888_1X24 respectively.

Max

> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel