From mboxrd@z Thu Jan  1 00:00:00 1970
From: f.fainelli@gmail.com (Florian Fainelli)
Date: Mon, 12 Dec 2016 18:20:13 -0800
Subject: [PATCH 0/6] USB support for Broadcom NSP SoC
In-Reply-To: <1478683994-12008-1-git-send-email-yendapally.reddy@broadcom.com>
References: <1478683994-12008-1-git-send-email-yendapally.reddy@broadcom.com>
Message-ID: <79483fc3-5e91-a1f0-1dbf-1987682373e6@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 11/09/2016 01:33 AM, Yendapally Reddy Dhananjaya Reddy wrote:
> This patch set contains the usb support for Broadcom NSP SoC.
> The usb phy is connected through mdio interface. The mdio interface
> can be used to access either internal phys or external phys using a
> multiplexer.
> 
> The first patch provides the documentation details for mdio-mux and
> second patch provides the documentation details for usb3 phy. The third
> patch contains the mdio-mux support and fourth patch contains the
> changes to the mdio bus driver.
> 
> The fifth patch provides the phy driver and sixth patch provides the
> enable method for usb.
> 
> This patch series has been tested on NSP bcm958625HR board.
> This patch series is based on v4.9.0-rc1 and is available from github-
> repo: https://github.com/Broadcom/cygnus-linux.git
> branch:nsp-usb-v1

Can you resubmit this patch series with the feedback from Andrew, Rob
and Scott addressed?

Thanks!
-- 
Florian