From: Yi Liu <yi.l.liu@intel.com>
To: Nicolin Chen <nicolinc@nvidia.com>, <jgg@nvidia.com>, <will@kernel.org>
Cc: <robin.murphy@arm.com>, <joro@8bytes.org>, <bhelgaas@google.com>,
<praan@google.com>, <baolu.lu@linux.intel.com>,
<kevin.tian@intel.com>, <miko.lenczewski@arm.com>,
<linux-arm-kernel@lists.infradead.org>, <iommu@lists.linux.dev>,
<linux-kernel@vger.kernel.org>, <linux-pci@vger.kernel.org>,
<dan.j.williams@intel.com>, <jonathan.cameron@huawei.com>,
<vsethi@nvidia.com>, <linux-cxl@vger.kernel.org>,
<nirmoyd@nvidia.com>
Subject: Re: [PATCH v6 2/3] PCI: Allow ATS to be always on for pre-CXL devices
Date: Fri, 22 May 2026 17:17:28 +0800 [thread overview]
Message-ID: <7a264588-e9cc-4598-8797-fa9caf2e1b7d@intel.com> (raw)
In-Reply-To: <0dd7e22f44bf35a33a590e0916983f9f7fe00de3.1779392420.git.nicolinc@nvidia.com>
On 5/22/26 04:34, Nicolin Chen wrote:
> Some NVIDIA GPU/NIC devices, though they don't implement CXL config space,
> have many CXL-like properties. Call this kind "pre-CXL".
>
> Similar to CXL.cache capability, these pre-CXL devices also require the ATS
> function even when their RIDs are IOMMU bypassed, i.e. keep ATS "always on"
> v.s. "on demand" when a non-zero PASID line gets enabled in SVA use cases.
>
> Introduce pci_dev_specific_ats_required() quirk function to scan a list of
> IDs for these devices. Then, include it in pci_ats_required().
>
> Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
> Reviewed-by: Nirmoy Das <nirmoyd@nvidia.com>
> Tested-by: Nirmoy Das <nirmoyd@nvidia.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
> Reviewed-by: Kevin Tian <kevin.tian@intel.com>
> Reviewed-by: Dave Jiang <dave.jiang@intel.com>
> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
> ---
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
> drivers/pci/pci.h | 9 +++++++++
> drivers/pci/ats.c | 3 ++-
> drivers/pci/quirks.c | 42 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 53 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 4a14f88e543a2..e8ad27abb1cfe 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -1155,6 +1155,15 @@ static inline int pci_dev_specific_reset(struct pci_dev *dev, bool probe)
> }
> #endif
>
> +#if defined(CONFIG_PCI_QUIRKS) && defined(CONFIG_PCI_ATS)
> +bool pci_dev_specific_ats_required(struct pci_dev *dev);
> +#else
> +static inline bool pci_dev_specific_ats_required(struct pci_dev *dev)
> +{
> + return false;
> +}
> +#endif
> +
> #if defined(CONFIG_PCI_QUIRKS) && defined(CONFIG_ARM64)
> int acpi_get_rc_resources(struct device *dev, const char *hid, u16 segment,
> struct resource *res);
> diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
> index 84cd06d74fc9c..96efa00d97433 100644
> --- a/drivers/pci/ats.c
> +++ b/drivers/pci/ats.c
> @@ -247,7 +247,8 @@ bool pci_ats_required(struct pci_dev *pdev)
> if (pdev->is_virtfn)
> pdev = pci_physfn(pdev);
>
> - return pci_cxl_ats_required(pdev);
> + return pci_cxl_ats_required(pdev) ||
> + pci_dev_specific_ats_required(pdev);
> }
> EXPORT_SYMBOL_GPL(pci_ats_required);
>
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index caaed1a01dc02..c0242f3e9f063 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -5715,6 +5715,48 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1457, quirk_intel_e2000_no_ats);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1459, quirk_intel_e2000_no_ats);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x145a, quirk_intel_e2000_no_ats);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x145c, quirk_intel_e2000_no_ats);
> +
> +static bool quirk_nvidia_gpu_ats_required(struct pci_dev *pdev)
> +{
> + switch (pdev->device) {
> + case 0x2e00 ... 0x2e3f: /* GB20B */
> + return true;
> + }
> + return false;
> +}
> +
> +static const struct pci_dev_ats_required {
> + u16 vendor;
> + u16 device;
> + bool (*ats_required)(struct pci_dev *dev);
> +} pci_dev_ats_required[] = {
> + /* NVIDIA GPUs */
> + { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, quirk_nvidia_gpu_ats_required },
> + /* NVIDIA CX10 Family NVlink-C2C */
> + { PCI_VENDOR_ID_MELLANOX, 0x2101, NULL },
> + { 0 }
> +};
> +
> +/*
> + * Some NVIDIA devices do not implement CXL config space, but present as PCIe
> + * devices that can issue CXL-like cache operations like CXL.cache. Thus, they
> + * require ATS to obtain host physical addresses, like pci_cxl_ats_required().
> + */
> +bool pci_dev_specific_ats_required(struct pci_dev *pdev)
> +{
> + const struct pci_dev_ats_required *i;
> +
> + for (i = pci_dev_ats_required; i->vendor; i++) {
> + if (i->vendor != pdev->vendor)
> + continue;
> + if (i->ats_required && i->ats_required(pdev))
> + return true;
> + if (!i->ats_required && i->device == pdev->device)
> + return true;
> + }
> +
> + return false;
> +}
> #endif /* CONFIG_PCI_ATS */
>
> /* Freescale PCIe doesn't support MSI in RC mode */
next prev parent reply other threads:[~2026-05-22 9:13 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-21 20:34 [PATCH v6 0/3] Allow ATS to be always on for certain ATS-capable devices Nicolin Chen
2026-05-21 20:34 ` [PATCH v6 1/3] PCI: Add pci_ats_required() for CXL.cache capable devices Nicolin Chen
2026-05-21 20:57 ` Bjorn Helgaas
2026-05-21 21:07 ` Nicolin Chen
2026-05-21 21:31 ` Bjorn Helgaas
2026-05-21 21:59 ` Nicolin Chen
2026-05-22 9:19 ` Yi Liu
2026-05-21 20:34 ` [PATCH v6 2/3] PCI: Allow ATS to be always on for pre-CXL devices Nicolin Chen
2026-05-22 9:17 ` Yi Liu [this message]
2026-05-21 20:34 ` [PATCH v6 3/3] iommu/arm-smmu-v3: Allow ATS to be always on Nicolin Chen
2026-05-28 7:35 ` [PATCH v6 0/3] Allow ATS to be always on for certain ATS-capable devices Jörg Rödel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7a264588-e9cc-4598-8797-fa9caf2e1b7d@intel.com \
--to=yi.l.liu@intel.com \
--cc=baolu.lu@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=dan.j.williams@intel.com \
--cc=iommu@lists.linux.dev \
--cc=jgg@nvidia.com \
--cc=jonathan.cameron@huawei.com \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=miko.lenczewski@arm.com \
--cc=nicolinc@nvidia.com \
--cc=nirmoyd@nvidia.com \
--cc=praan@google.com \
--cc=robin.murphy@arm.com \
--cc=vsethi@nvidia.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox