Re: [PATCH 2/3] PCI: imx: add err check to host init and fix regulator dump

[Lucas Stach <l.stach@pengutronix.de>]

Am Mittwoch, dem 08.09.2021 um 14:59 +0800 schrieb Richard Zhu:
> Since there is error return check of the host_init callback, add error
> check to imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> function.
> 
> Because that i.MX PCIe doesn't support the hot-plug feature. To save
> power consumption as much as possible, turn off the clocks and power
> supplies when the PCIe PHY link is never came up in probe procedure.
> 
> When PCIe link is never came up and vpcie regulator is present, there
> would be following dump when try to put the regulator.
> Disable this regulator to fix this dump when link is never came up.
> 
> [    2.335880] imx6q-pcie 33800000.pcie: Phy link never came up
> [    2.341642] imx6q-pcie: probe of 33800000.pcie failed with error -110
> [    2.348160] ------------[ cut here ]------------
> [    2.352778] WARNING: CPU: 3 PID: 119 at drivers/regulator/core.c:2256 _regulator_put.part.0+0x14c/0x158
> [    2.362184] Modules linked in:
> [    2.365243] CPU: 3 PID: 119 Comm: kworker/u8:2 Not tainted 5.13.0-rc7-next-20210625-94710-ge4e92b2588a3 #10
> [    2.374987] Hardware name: FSL i.MX8MM EVK board (DT)
> [    2.380040] Workqueue: events_unbound async_run_entry_fn
> [    2.385359] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
> [    2.391369] pc : _regulator_put.part.0+0x14c/0x158
> [    2.396163] lr : regulator_put+0x34/0x48
> [    2.400088] sp : ffff8000122ebb30
> [    2.403400] x29: ffff8000122ebb30 x28: ffff800011be7000 x27: 0000000000000000
> [    2.410546] x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000025f2bc
> [    2.417689] x23: ffff00000025f2c0 x22: ffff00000025f010 x21: ffff8000122ebc18
> [    2.424834] x20: ffff800011e3fa60 x19: ffff00000375fd80 x18: 0000000000000010
> [    2.431979] x17: 000000040044ffff x16: 00400032b5503510 x15: 0000000000000108
> [    2.439124] x14: ffff0000003cc938 x13: 00000000ffffffea x12: 0000000000000000
> [    2.446267] x11: 0000000000000000 x10: ffff80001076ba88 x9 : ffff80001076a540
> [    2.453411] x8 : ffff00000025f2c0 x7 : ffff0000001f4450 x6 : ffff000000176cd8
> [    2.460556] x5 : ffff000003857880 x4 : 0000000000000000 x3 : ffff800011e3fe30
> [    2.467700] x2 : ffff0000003cc4c0 x1 : 0000000000000000 x0 : 0000000000000001
> [    2.474847] Call trace:
> [    2.477295]  _regulator_put.part.0+0x14c/0x158
> [    2.481742]  regulator_put+0x34/0x48
> [    2.485322]  devm_regulator_release+0x10/0x18
> [    2.489681]  release_nodes+0x38/0x60
> [    2.493262]  devres_release_all+0x88/0xd0
> [    2.497276]  really_probe+0xd0/0x2e8
> [    2.500858]  __driver_probe_device+0x74/0xd8
> [    2.505137]  driver_probe_device+0x7c/0x108
> [    2.509325]  __device_attach_driver+0x8c/0xd0
> [    2.513685]  bus_for_each_drv+0x74/0xc0
> [    2.517531]  __device_attach_async_helper+0xb4/0xd8
> [    2.522419]  async_run_entry_fn+0x30/0x100
> [    2.526521]  process_one_work+0x19c/0x320
> [    2.530532]  worker_thread+0x48/0x418
> [    2.534199]  kthread+0x14c/0x158
> [    2.537432]  ret_from_fork+0x10/0x18
> [    2.541013] ---[ end trace 3664ca4a50ce849b ]---
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 28 +++++++++++++++++++--------
>  1 file changed, 20 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 0264432e4c4a..129928e42f84 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -144,6 +144,7 @@ struct imx6_pcie {
>  #define PHY_RX_OVRD_IN_LO_RX_PLL_EN		BIT(3)
>  
>  static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie);
> +static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie);
>  
>  static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
>  {
> @@ -485,24 +486,24 @@ static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
>  		dev_err(dev, "PCIe PLL lock timeout\n");
>  }
>  
> -static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> +static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
>  {
>  	struct dw_pcie *pci = imx6_pcie->pci;
>  	struct device *dev = pci->dev;
> -	int ret;
> +	int ret, err;

Why do we need a separate variable for the error code here? Why not
just use the existing ret?

>  
>  	if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
>  		ret = regulator_enable(imx6_pcie->vpcie);
>  		if (ret) {
>  			dev_err(dev, "failed to enable vpcie regulator: %d\n",
>  				ret);
> -			return;
> +			return ret;
>  		}
>  	}
>  
> -	ret = imx6_pcie_clk_enable(imx6_pcie);
> -	if (ret) {
> -		dev_err(dev, "unable to enable pcie clocks\n");
> +	err = imx6_pcie_clk_enable(imx6_pcie);
> +	if (err) {
> +		dev_err(dev, "unable to enable pcie clocks: %d\n", err);
>  		goto err_clks;
>  	}
>  
> @@ -557,7 +558,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
>  		break;
>  	}
>  
> -	return;
> +	return 0;
>  
>  err_clks:
>  	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
> @@ -566,6 +567,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
>  			dev_err(dev, "failed to disable vpcie regulator: %d\n",
>  				ret);
>  	}
> +	return err;
>  }
>  
>  static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
> @@ -810,17 +812,27 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
>  		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
>  		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
>  	imx6_pcie_reset_phy(imx6_pcie);
> +	imx6_pcie_clk_disable(imx6_pcie);

This is a separate fix for the clock enable counts, that isn't
mentioned in the commit message.

It seems like this patch fixes in fact 3 issues: error propagation from
host_init, fix regulator reference handling, fix clk reference
handling. Either split up the patch along those changes (if possible)
or improve the commit message to explain those changes.

Regards,
Lucas

> +	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0)
> +		regulator_disable(imx6_pcie->vpcie);
>  	return ret;
>  }
>  
>  static int imx6_pcie_host_init(struct pcie_port *pp)
>  {
>  	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct device *dev = pci->dev;
>  	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
> +	int ret;
>  
>  	imx6_pcie_assert_core_reset(imx6_pcie);
>  	imx6_pcie_init_phy(imx6_pcie);
> -	imx6_pcie_deassert_core_reset(imx6_pcie);
> +	ret = imx6_pcie_deassert_core_reset(imx6_pcie);
> +	if (ret < 0) {
> +		dev_err(dev, "pcie host init failed: %d.\n", ret);
> +		return ret;
> +	}
> +
>  	imx6_setup_phy_mpll(imx6_pcie);
>  
>  	return 0;



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel