* [PATCH 1/1] arm64: tegra: fix PPI interrupt flag
@ 2017-04-03 11:19 Aniruddha Banerjee
2017-04-03 12:55 ` Jon Hunter
0 siblings, 1 reply; 3+ messages in thread
From: Aniruddha Banerjee @ 2017-04-03 11:19 UTC (permalink / raw)
To: linux-arm-kernel
The interrupt flag for PPI should not be set to any value, since the
register is read-only. Fix the flags for the PPI interrupts to
IRQ_TYPE_NONE, so that there is no write to the read-only register.
Signed-off-by: Aniruddha Banerjee <aniruddhab@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra132.dtsi | 8 ++++----
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 8 ++++----
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 8 ++++----
3 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 3f3a46a4bd01..219fb3c6a273 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -1093,13 +1093,13 @@
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
<GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
<GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
<GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>;
interrupt-parent = <&gic>;
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 62fa85ae0271..e602299f7694 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -390,13 +390,13 @@
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
<GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
<GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
<GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>;
interrupt-parent = <&gic>;
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 2f832df29da8..6f3060b40a40 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -1214,13 +1214,13 @@
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
<GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
<GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
<GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>;
interrupt-parent = <&gic>;
};
--
2.11.0
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH 1/1] arm64: tegra: fix PPI interrupt flag
2017-04-03 11:19 [PATCH 1/1] arm64: tegra: fix PPI interrupt flag Aniruddha Banerjee
@ 2017-04-03 12:55 ` Jon Hunter
2017-04-03 13:11 ` Marc Zyngier
0 siblings, 1 reply; 3+ messages in thread
From: Jon Hunter @ 2017-04-03 12:55 UTC (permalink / raw)
To: linux-arm-kernel
Adding Marc ...
On 03/04/17 12:19, Aniruddha Banerjee wrote:
> The interrupt flag for PPI should not be set to any value, since the
> register is read-only. Fix the flags for the PPI interrupts to
> IRQ_TYPE_NONE, so that there is no write to the read-only register.
If the below matches the h/w default, does this really cause a problem?
Note, we will not attempt to write the type if it matches the current
programmed type.
I had thought that the in DT file, the type for the PPI should align
with the h/w default in the case where it cannot be written. However, I
guess this is not explicitly stated anywhere I have found, but at the
same time the binding doc for the arm,gic.txt does not list
"IRQ_TYPE_NONE" as an option.
Marc, what are your thoughts?
> Signed-off-by: Aniruddha Banerjee <aniruddhab@nvidia.com>
> ---
> arch/arm64/boot/dts/nvidia/tegra132.dtsi | 8 ++++----
> arch/arm64/boot/dts/nvidia/tegra186.dtsi | 8 ++++----
> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 8 ++++----
> 3 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
> index 3f3a46a4bd01..219fb3c6a273 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
> @@ -1093,13 +1093,13 @@
> timer {
> compatible = "arm,armv7-timer";
> interrupts = <GIC_PPI 13
> - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
> <GIC_PPI 14
> - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
> <GIC_PPI 11
> - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
> <GIC_PPI 10
> - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>;
> interrupt-parent = <&gic>;
> };
> };
> diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> index 62fa85ae0271..e602299f7694 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> @@ -390,13 +390,13 @@
> timer {
> compatible = "arm,armv8-timer";
> interrupts = <GIC_PPI 13
> - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
> <GIC_PPI 14
> - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
> <GIC_PPI 11
> - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
> <GIC_PPI 10
> - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>;
> interrupt-parent = <&gic>;
> };
> };
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> index 2f832df29da8..6f3060b40a40 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> @@ -1214,13 +1214,13 @@
> timer {
> compatible = "arm,armv8-timer";
> interrupts = <GIC_PPI 13
> - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
> <GIC_PPI 14
> - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
> <GIC_PPI 11
> - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>,
> <GIC_PPI 10
> - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_NONE)>;
> interrupt-parent = <&gic>;
> };
Cheers
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH 1/1] arm64: tegra: fix PPI interrupt flag
2017-04-03 12:55 ` Jon Hunter
@ 2017-04-03 13:11 ` Marc Zyngier
0 siblings, 0 replies; 3+ messages in thread
From: Marc Zyngier @ 2017-04-03 13:11 UTC (permalink / raw)
To: linux-arm-kernel
On 03/04/17 13:55, Jon Hunter wrote:
> Adding Marc ...
>
> On 03/04/17 12:19, Aniruddha Banerjee wrote:
>> The interrupt flag for PPI should not be set to any value, since the
>> register is read-only. Fix the flags for the PPI interrupts to
>> IRQ_TYPE_NONE, so that there is no write to the read-only register.
>
> If the below matches the h/w default, does this really cause a problem?
>
> Note, we will not attempt to write the type if it matches the current
> programmed type.
>
> I had thought that the in DT file, the type for the PPI should align
> with the h/w default in the case where it cannot be written. However, I
> guess this is not explicitly stated anywhere I have found, but at the
> same time the binding doc for the arm,gic.txt does not list
> "IRQ_TYPE_NONE" as an option.
>
> Marc, what are your thoughts?
My immediate answer is "Why?".
As you pointed out, we don't even try to program the GICD_ICFGR1
register if what we read from it is the right thing. Also, the GICv2
spec says in 4.3.13: "For PPIs, it is IMPLEMENTATION DEFINED whether the
most significant bit of the Int_config field is programmable.".
So NONE is always wrong (because there is no such thing in the HW), and
the DT should have a setting that matches the HW even GICD_ICFGR1 is RO
(the OS may need to know how the triggering configuration anyhow).
Aniruddha: what problem are you trying to solve here? The DT you're
touching seems just fine to me...
Thanks,
M.
--
Jazz is not dead. It just smells funny...
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-04-03 13:11 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-04-03 11:19 [PATCH 1/1] arm64: tegra: fix PPI interrupt flag Aniruddha Banerjee
2017-04-03 12:55 ` Jon Hunter
2017-04-03 13:11 ` Marc Zyngier
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).