From: khilman@baylibre.com (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] Amlogic 64-bit DT changes for v4.9
Date: Fri, 02 Sep 2016 17:27:23 -0700 [thread overview]
Message-ID: <7h7fat25g4.fsf@baylibre.com> (raw)
Hello,
The pull request below is for the DT changes for 64-bit Amlogic
platforms.
The DT additions for the new clock/reset support are dependent on DT
bindings/includes that were merged via the clock tree, so this branch
includes a merge of an immtable branch (clk/clk-gxbb-meson-ao) from the
clock tree to handle those dependencies.
Due to the dependency, it's fine with me if this goes into next/late
instead of next/dt64.
Thanks,
Kevin
The following changes since commit 29b4817d4018df78086157ea3a55c1d9424a7cfc:
Linux 4.8-rc1 (2016-08-07 18:18:00 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git tags/amlogic-dt64
for you to fetch changes up to bfe59f92d30613398997f235dbae623583d61b38:
ARM64: dts: amlogic: gxbb: Enable NVMEM (2016-09-01 15:27:11 -0700)
----------------------------------------------------------------
Amlogic 64-bit DT changes for v4.9
- add watchdog, reset, IR remote, PWM
- add secure monitor and eFuse
- add always-on (AO) domain clock and reset
----------------------------------------------------------------
Carlo Caione (4):
documentation: Add secure monitor bindings documentation
ARM64: dts: amlogic: gxbb: Enable secure monitor
documentation: Add nvmem bindings documentation
ARM64: dts: amlogic: gxbb: Enable NVMEM
Kevin Hilman (4):
ARM64: DTS: meson-gxbb: switch ethernet to real clock
Merge branch 'clk-meson-gxbb-ao' of git://git.kernel.org/.../clk/linux into v4.8/dt64
ARM64: dts: amlogic: add the input pin for the IR remote
ARM64: dts: meson-gxbb: Add PWM pinctrl nodes
Martin Blumenstingl (1):
ARM64: dts: meson-gxbb: Enable the the IR decoder on supported boards
Neil Armstrong (6):
ARM64: dts: amlogic: meson-gxbb: Add watchdog node
dt-bindings: clock: reset: Add GXBB AO Clock and Reset Bindings
clk: meson: Add GXBB AO Clock and Reset controller driver
ARM64: dts: meson-gxbb: Add GXBB AO Clock and Reset node
dt-bindings: media: meson-ir: Add Meson8b and GXBB compatible strings
ARM64: dts: meson-gxbb: Add Infrared Remote Controller decoder
Wei Yongjun (1):
clk: meson: Fix invalid use of sizeof in gxbb_aoclkc_probe()
Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt | 45 +++++++++++++++++++++
Documentation/devicetree/bindings/firmware/meson/meson_sm.txt | 15 +++++++
Documentation/devicetree/bindings/media/meson-ir.txt | 5 ++-
Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt | 39 ++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 5 +++
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 5 +++
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 6 +++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 133 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
drivers/clk/meson/Makefile | 2 +-
drivers/clk/meson/gxbb-aoclk.c | 191 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/dt-bindings/clock/gxbb-aoclkc.h | 66 ++++++++++++++++++++++++++++++
include/dt-bindings/reset/gxbb-aoclkc.h | 66 ++++++++++++++++++++++++++++++
12 files changed, 575 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
create mode 100644 Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
create mode 100644 Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
create mode 100644 drivers/clk/meson/gxbb-aoclk.c
create mode 100644 include/dt-bindings/clock/gxbb-aoclkc.h
create mode 100644 include/dt-bindings/reset/gxbb-aoclkc.h
next reply other threads:[~2016-09-03 0:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-03 0:27 Kevin Hilman [this message]
2016-09-14 15:41 ` [GIT PULL] Amlogic 64-bit DT changes for v4.9 Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7h7fat25g4.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox