linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: khilman@kernel.org (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] clk: samsung: Fix Exynos 5420 pinctrl setup and clock disable failure due to domain being gated
Date: Wed, 10 Dec 2014 09:35:31 -0800	[thread overview]
Message-ID: <7hlhmfo1b0.fsf@deeprootsystems.com> (raw)
In-Reply-To: <5486F69B.6020005@samsung.com> (Sylwester Nawrocki's message of "Tue, 09 Dec 2014 14:18:19 +0100")

Sylwester Nawrocki <s.nawrocki@samsung.com> writes:

> On 09/12/14 13:59, Krzysztof Kozlowski wrote:
>> On pi?, 2014-12-05 at 15:15 +0100, Krzysztof Kozlowski wrote:
>>> > Audio subsystem clocks are located in separate block. On Exynos 5420 if
>>> > clock for this block (from main clock domain) 'mau_epll' is gated then
>>> > any read or write to audss registers will block.
>>> > 
>>> > This kind of boot hang was observed on Arndale Octa and Peach Pi/Pit
>>> > after introducing runtime PM to pl330 DMA driver. After that commit the
>>> > 'mau_epll' was gated, because the "amba" clock was disabled and there
>>> > were no more users of mau_epll.
>>> > 
>>> > The system hang on one of steps:
>>> > 1. Disabling unused clocks from audss block.
>>> > 2. During audss GPIO setup (just before probing i2s0 because
>>> >    samsung_pinmux_setup() tried to access memory from audss block which was
>>> >    gated.
>>> > 
>>> > Add a workaround for this by enabling the 'mau_epll' clock in probe.
>>> > 
>>> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>>> > ---
>>> >  drivers/clk/samsung/clk-exynos-audss.c | 29 ++++++++++++++++++++++++++++-
>>> >  1 file changed, 28 insertions(+), 1 deletion(-)
>>
>> Sorry for pinging so quick but merge window is open and it looks like
>> booting Exynos542x boards will be broken (because pl330 will no longer
>> hold adma clock enabled so whole audss domain will be gated).
>> 
>> This is a non-intrusive workaround for that issue, as wanted by
>> Sylwester:
>> https://lkml.org/lkml/2014/12/5/223
>> 
>> Any comments on this?
>
> The patch looks OK to me, it would be good though if someone else
> has confirmed it fixes the bug. I don't have any clock patches queued
> at the moment. Perhaps you could apply it directly, Mike ?

I confirm it fixes the boot hang in linux-next (next-20141210) on my
exynos5800-peach-pi and exynos5420-arndale-octa.  Tested both
exynos_defconfig and multi_v7_defconfig.

Tested-by: Kevin Hilman <khilman@linaro.org>

Kevin

  parent reply	other threads:[~2014-12-10 17:35 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-05 14:15 [PATCH] clk: samsung: Fix Exynos 5420 pinctrl setup and clock disable failure due to domain being gated Krzysztof Kozlowski
2014-12-09 12:59 ` Krzysztof Kozlowski
2014-12-09 13:18   ` Sylwester Nawrocki
2014-12-09 14:05     ` Javier Martinez Canillas
2014-12-10 17:35     ` Kevin Hilman [this message]
2014-12-15 22:26       ` Kevin Hilman
2014-12-16  8:20         ` Krzysztof Kozlowski
2014-12-17 15:23           ` Mike Turquette
2014-12-18  6:58             ` Mike Turquette
2014-12-18 22:10               ` Kevin Hilman
2014-12-18 22:32                 ` Mike Turquette
2014-12-24 16:36       ` Paolo Pisati
2015-01-02  9:49         ` Javier Martinez Canillas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7hlhmfo1b0.fsf@deeprootsystems.com \
    --to=khilman@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).