linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: khilman@deeprootsystems.com (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: exynos boot falures in linux-next
Date: Mon, 17 Nov 2014 14:24:01 -0800	[thread overview]
Message-ID: <7hlhn9zcse.fsf@deeprootsystems.com> (raw)
In-Reply-To: <7hoas54y7k.fsf@deeprootsystems.com> (Kevin Hilman's message of "Mon, 17 Nov 2014 07:57:03 -0800")

Kevin Hilman <khilman@kernel.org> writes:

> FYI...
>
> Various new exynos5 boot failures starting next-20141117.  Looking in
> the boot logs, the boot stops during DRM initialization.
>
> Note that the boot failures are only on exynos_defconfig, and not
> multi_v7_defconfig.

As might have been expected, reverting the change that enables the
DRM/display options in exynos_defconfig fixes the problem.

Kevin

> Excerpt from boot report below, or recent exynos boots can also be
> explored here:
>
>    http://status.armcloud.us/boot/?exynos
>
> Kevin
>
>
> Kevin's boot bot <khilman@kernel.org> writes:
>
>> Full Build report: http://status.armcloud.us/build/next/kernel/next-20141117/
>> Full Boot report:  http://status.armcloud.us/boot/all/job/next/kernel/next-20141117/
>>
>> Tree/Branch: next
>> Git describe: next-20141117
>>
>> Failed boot tests
>> =================
>
> [...]
>
>>            exynos5422-odroid-xu3:     FAIL:    arm-exynos_defconfig
>>                                       http://storage.armcloud.us/kernel-ci/next/next-20141117/arm-exynos_defconfig/boot-exynos5422-odroid-xu3.html
>>               exynos5250-arndale:     FAIL:    arm-exynos_defconfig
>>                                       http://storage.armcloud.us/kernel-ci/next/next-20141117/arm-exynos_defconfig/boot-exynos5250-arndale.html
>>              exynos5800-peach-pi:     FAIL:    arm-exynos_defconfig
>>                                       http://storage.armcloud.us/kernel-ci/next/next-20141117/arm-exynos_defconfig/boot-exynos5800-peach-pi.html

[1]
commit 0ef76aea7a344ac520b02822a8080797fa06124c
Author: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Date:   Thu Nov 13 11:51:42 2014 +0900

    ARM: exynos_defconfig: Enable options for display panel support

    Many Exynos devices have a display panel. Most of them just have
    a simple panel while others have more complex configurations that
    requires an embedded DisplayPort (eDP) to LVDS bridges.

    This patch enables the following features to be built in the kernel
    image to support both setups:

    - Direct Rendering Manager (DRM)
    - DRM bridge registration and lookup framework
    - Parade ps8622/ps8625 eDP/LVDS bridge
    - NXP ptn3460 eDP/LVDS bridge
    - Exynos Fully Interactive Mobile Display controller (FIMD)
    - Panel registration and lookup framework
    - Simple panels
    - Backlight & LCD device support

    Signed-off-by: Javier Martinez Canillas
    <javier.martinez@collabora.co.uk>
    Tested-by: Kevin Hilman <khilman@linaro.org>
    Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

  parent reply	other threads:[~2014-11-17 22:24 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <E1XqKYI-0000pQ-4b@ip-10-35-177-41.ec2.internal>
     [not found] ` <7h61ed4xm3.fsf@deeprootsystems.com>
2014-11-17 18:21   ` mirabox boot fails in linux-next (was: next boot: 94 boots: 79 pass, 13 fail, 2 untried (next-20141117)) Thomas Petazzoni
     [not found] ` <7hoas54y7k.fsf@deeprootsystems.com>
2014-11-17 16:57   ` exynos boot falures in linux-next Krzysztof Kozłowski
2014-11-17 22:24   ` Kevin Hilman [this message]
2014-11-17 23:25     ` Javier Martinez Canillas
2014-11-18  2:30       ` Inki Dae
2014-11-18  3:49       ` Kevin Hilman
2014-11-19 17:01         ` Kevin Hilman
2014-11-19 17:06           ` Javier Martinez Canillas
2014-11-20  1:55             ` Kukjin Kim
2014-12-02  8:32               ` Javier Martinez Canillas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7hlhn9zcse.fsf@deeprootsystems.com \
    --to=khilman@deeprootsystems.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).