[PATCH v4 0/2] Add ethernet support for Meson-AXG SoC

[PATCH v4 0/2] Add ethernet support for Meson-AXG SoC

[Yixun Lan]

This series try to add support for the ethernet MAC controller
found in Meson-AXG SoC, and also enable it in the S400 board.

Hi Kevin:
  You still need to at least merge the clock patch[3] in order to
compile the DTS, or just merge the tag from meson-clock's tree[6]
- the tag is 'meson-clk-for-v4.16-2', since the clock part already
taken there.


Changes in v4 since [5]:
 - rebase to kevin's v4.16/dt64
 - fix order

Changes in v3 since [4]:
 - put clock DT info in soc.dtsi
 - separate DT for 'add support for the controller' vs 'enable in board'

Changes in v2 since [1]:
 - rebase to kevin's v4.16/dt64 branch
 - add Neil's Reviewed-by
 - move clock info to board.dts instead of in soc.dtsi
 - drop "meson-axg-dwmac" compatible string, since we didn't use this
   we could re-add it later when we really need.
 - note: to make ethernet work properly,it depend on clock & pinctrl[2],
   to compile the DTS, the patch [3] is required.
   the code part will be taken via clock & pinctrl subsystem tree.

[5]
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005783.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005784.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005785.html

[4]
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005768.html

[1]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005301.html

[2]
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005735.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005694.html

[3]
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005738.html

[6] git://github.com/BayLibre/clk-meson.git

Yixun Lan (2):
  ARM64: dts: meson-axg: add ethernet mac controller
  ARM64: dts: meson-axg: enable ethernet for A113D S400 board

 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts |  7 ++++
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi     | 54 ++++++++++++++++++++++++++
 2 files changed, 61 insertions(+)

-- 
2.15.1

[PATCH v4 1/2] ARM64: dts: meson-axg: add ethernet mac controller

[Yixun Lan]

Add DT info for the stmmac ethernet MAC which found in
the Amlogic's Meson-AXG SoC, also describe the ethernet
pinctrl & clock information here.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 54 ++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index d288d4724ae3..dea1bc31b4de 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-clkc.h>
 
 / {
 	compatible = "amlogic,meson-axg";
@@ -155,6 +156,19 @@
 			};
 		};
 
+		ethmac: ethernet at ff3f0000 {
+			compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+			reg = <0x0 0xff3f0000 0x0 0x10000
+				0x0 0xff634540 0x0 0x8>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "macirq";
+			clocks = <&clkc CLKID_ETH>,
+				 <&clkc CLKID_FCLK_DIV2>,
+				 <&clkc CLKID_MPLL2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1";
+			status = "disabled";
+		};
+
 		gic: interrupt-controller at ffc01000 {
 			compatible = "arm,gic-400";
 			reg = <0x0 0xffc01000 0 0x1000>,
@@ -215,6 +229,46 @@
 					gpio-ranges = <&pinctrl_periphs 0 0 86>;
 				};
 
+				eth_rgmii_x_pins: eth-x-rgmii {
+					mux {
+						groups = "eth_mdio_x",
+						       "eth_mdc_x",
+						       "eth_rgmii_rx_clk_x",
+						       "eth_rx_dv_x",
+						       "eth_rxd0_x",
+						       "eth_rxd1_x",
+						       "eth_rxd2_rgmii",
+						       "eth_rxd3_rgmii",
+						       "eth_rgmii_tx_clk",
+						       "eth_txen_x",
+						       "eth_txd0_x",
+						       "eth_txd1_x",
+						       "eth_txd2_rgmii",
+						       "eth_txd3_rgmii";
+						function = "eth";
+					};
+				};
+
+				eth_rgmii_y_pins: eth-y-rgmii {
+					mux {
+						groups = "eth_mdio_y",
+						       "eth_mdc_y",
+						       "eth_rgmii_rx_clk_y",
+						       "eth_rx_dv_y",
+						       "eth_rxd0_y",
+						       "eth_rxd1_y",
+						       "eth_rxd2_rgmii",
+						       "eth_rxd3_rgmii",
+						       "eth_rgmii_tx_clk",
+						       "eth_txen_y",
+						       "eth_txd0_y",
+						       "eth_txd1_y",
+						       "eth_txd2_rgmii",
+						       "eth_txd3_rgmii";
+						function = "eth";
+					};
+				};
+
 				pwm_a_a_pins: pwm_a_a {
 					mux {
 						groups = "pwm_a_a";
-- 
2.15.1

[PATCH v4 1/2] ARM64: dts: meson-axg: add ethernet mac controller

[Kevin Hilman]

Yixun Lan <yixun.lan@amlogic.com> writes:

> Add DT info for the stmmac ethernet MAC which found in
> the Amlogic's Meson-AXG SoC, also describe the ethernet
> pinctrl & clock information here.
>
> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>

Applied to v4.16/dt64,

Kevin

[PATCH v4 2/2] ARM64: dts: meson-axg: enable ethernet for A113D S400 board

[Yixun Lan]

This is tested in the S400 dev board which use a RTL8211F PHY,
and the pins connect to the 'eth_rgmii_y_pins' group.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 70eca1f8736a..8932654f5090 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -17,6 +17,13 @@
 	};
 };
 
+&ethmac {
+	status = "okay";
+	phy-mode = "rgmii";
+	pinctrl-0 = <&eth_rgmii_y_pins>;
+	pinctrl-names = "default";
+};
+
 &uart_AO {
 	status = "okay";
 };
-- 
2.15.1