From: khilman@baylibre.com (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/2] ARM64: dts: meson-axg: add ethernet mac controller
Date: Fri, 15 Dec 2017 11:29:31 -0800 [thread overview]
Message-ID: <7ho9mz94dg.fsf@baylibre.com> (raw)
In-Reply-To: <20171215021014.231308-2-yixun.lan@amlogic.com> (Yixun Lan's message of "Fri, 15 Dec 2017 10:10:13 +0800")
Yixun Lan <yixun.lan@amlogic.com> writes:
> Add DT info for the stmmac ethernet MAC which found in
> the Amlogic's Meson-AXG SoC, also describe the ethernet
> pinctrl & clock information here.
>
> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
This patch does not apply, and dependencies are not described.
> ---
> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 54 ++++++++++++++++++++++++++++++
> 1 file changed, 54 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index d356ce74ad89..94c4972222b7 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -7,6 +7,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/axg-clkc.h>
>
> / {
> compatible = "amlogic,meson-axg";
> @@ -148,6 +149,19 @@
> #address-cells = <0>;
> };
>
> + ethmac: ethernet at ff3f0000 {
> + compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
> + reg = <0x0 0xff3f0000 0x0 0x10000
> + 0x0 0xff634540 0x0 0x8>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "macirq";
> + clocks = <&clkc CLKID_ETH>,
> + <&clkc CLKID_FCLK_DIV2>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "stmmaceth", "clkin0", "clkin1";
> + status = "disabled";
> + };
> +
> hiubus: bus at ff63c000 {
> compatible = "simple-bus";
> reg = <0x0 0xff63c000 0x0 0x1c00>;
Based on the hiubus node, presumably this depends on the patch from the
clock series.
> @@ -194,6 +208,46 @@
> #gpio-cells = <2>;
> gpio-ranges = <&pinctrl_periphs 0 0 86>;
> };
I'm not sure where this part is coming from, but it causes the rest of
it to not apply.
Please be sure to describe all dependencies.
Kevin
> +
> + eth_rgmii_x_pins: eth-x-rgmii {
> + mux {
> + groups = "eth_mdio_x",
> + "eth_mdc_x",
> + "eth_rgmii_rx_clk_x",
> + "eth_rx_dv_x",
> + "eth_rxd0_x",
> + "eth_rxd1_x",
> + "eth_rxd2_rgmii",
> + "eth_rxd3_rgmii",
> + "eth_rgmii_tx_clk",
> + "eth_txen_x",
> + "eth_txd0_x",
> + "eth_txd1_x",
> + "eth_txd2_rgmii",
> + "eth_txd3_rgmii";
> + function = "eth";
> + };
> + };
> +
> + eth_rgmii_y_pins: eth-y-rgmii {
> + mux {
> + groups = "eth_mdio_y",
> + "eth_mdc_y",
> + "eth_rgmii_rx_clk_y",
> + "eth_rx_dv_y",
> + "eth_rxd0_y",
> + "eth_rxd1_y",
> + "eth_rxd2_rgmii",
> + "eth_rxd3_rgmii",
> + "eth_rgmii_tx_clk",
> + "eth_txen_y",
> + "eth_txd0_y",
> + "eth_txd1_y",
> + "eth_txd2_rgmii",
> + "eth_txd3_rgmii";
> + function = "eth";
> + };
> + };
> };
> };
next prev parent reply other threads:[~2017-12-15 19:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-15 2:10 [PATCH v3 0/2] Add ethernet support for Meson-AXG SoC Yixun Lan
2017-12-15 2:10 ` [PATCH v3 1/2] ARM64: dts: meson-axg: add ethernet mac controller Yixun Lan
2017-12-15 19:29 ` Kevin Hilman [this message]
2017-12-16 3:38 ` Yixun Lan
2017-12-15 2:10 ` [PATCH v3 2/2] ARM64: dts: meson-axg: enable ethernet for A113D S400 board Yixun Lan
2017-12-15 19:31 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7ho9mz94dg.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).