Re: [PATCHv3 1/2] dt-bindings: mfd: syscon: Add ti,j721e-acspcie-proxy-ctrl compatible

[Kevin Hilman <khilman@baylibre.com>]

Nishanth Menon <nm@ti.com> writes:

> On 15:07-20241205, Kevin Hilman wrote:
>> 
>> On Mon, 02 Dec 2024 15:33:30 +0100, Romain Naour wrote:
>> > The ACSPCIE_PROXY_CTRL registers within the CTRL_MMR space of TI's J721e
>> > SoC are used to drive the reference clock to the PCIe Endpoint device via
>> > the PAD IO Buffers. Add the compatible for allowing the PCIe driver to
>> > obtain the regmap for the ACSPCIE_CTRL register within the System
>> > Controller device-tree node in order to enable the PAD IO Buffers.
>> > 
>> > The Technical Reference Manual for J721e SoC with details of the
>> > ASCPCIE_CTRL registers is available at:
>> > https://www.ti.com/lit/zip/spruil1
>> > 
>> > [...]
>> 
>> Applied, thanks!
>> 
>> [1/2] dt-bindings: mfd: syscon: Add ti,j721e-acspcie-proxy-ctrl compatible
>>       commit: d8efc0b428856137608ffcbb6994da6041c9fe2a
>> [2/2] arm64: dts: ti: k3-j721e-beagleboneai64: Enable ACSPCIE output for PCIe1
>>       commit: 1d5e14a20dc60b440c60bec8489acfd45cdf7508
>> 
>> Best regards,
>> -- 
>> Kevin Hilman <khilman@baylibre.com>
>> 
> This will need a bit of fixup - See along the lines of the following.
> Additionally, we should be a bit careful about the dependency of dts
> mix up from two trees.

sorry, these should be going through your tree in the first place.  They
are now dropped from my tree, please go ahead and take them along with
Andrews fixup.  Sorry for complicating things.

Kevin